Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC | ₹3.9 L Quoted ₹5.8 L | L1 | Accepted-AOC AOC |
| 2 | L2₹6.1 L+₹28,418.80 (4.86%)Rejected-Finance HIMACHAL PRADESH HP | ₹6.1 L+₹28,418.80 (4.86%) | L2 | Rejected-Finance L2 |
| 3 | L3₹6.3 L+₹44,837.60 (7.67%)Rejected-Finance | ₹6.3 L+₹44,837.60 (7.67%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | MAHESHWAR NAND L1 | MUKESH KUMAR L2 | DEEKSHA SHARMA L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 116.88 | Cum | 550 ₹64,284 Lowest | 560 ₹65,452.8 | 570 ₹66,621.6 |
| 2.00Dismantelling ofbutt welding GI pipe with cutting of pipes at site the rate onclude entire carriage of material, flushing, cleaning, complete to the bestsatisfaction and direction of Engineer in Charge witin all leads and lifts. (Earth work in trenches will be measured and paid for seperately). | ||||||
| 2.01 | G.I. Tube 150 mm dia MC. | 850 | Rmt. | 250 ₹2,12,500 Lowest | 260 ₹2,21,000 | 270 ₹2,29,500 |
| 3.00Relaying and binding of dismantelled Gl pipe ( by way of circumfrential butt welded joints by electrical are welding) and testing of Gl pipe of following dia meters confirming to BIS 1239 and capable of withstanding required test pressure in a random length of 4 to 7 meters. including manufacturing reducers/ tapers, all short pieces, beds ete, as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding. jointing, fabrication of bends, tees etc. including testing complete in all respects to the satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). | ||||||
| 3.01 | G.I. Tube 150 mm dia MC. | 375 | Rmt. | 340 ₹1,27,500 Lowest | 350 ₹1,31,250 | 360 ₹1,35,000 |
| 4.00 | Providing and Fixing of cast iron sluice valve with flange of following dia Class 1.6 including cost of rubber inspection washer (Gasket) etc. open end with hand wheel confirming to IS: 14846 having test pressure of 10.20 Kg/sqcm. of Leader/Kirloskar make complete in all respect including carriage in all leads and lifts as directed by Engineer-in- Charge. | 3 | Rmt. | 60,000 ₹1,80,000 Lowest | 65,000 ₹1,95,000 | 66,000 ₹1,98,000 |
Tender Value
₹4.0 L
EMD Value
₹8,095
Closing Date
24 Mar 2026, 5:00 pmClosed
E.E. JSV Division Anni
E.E. JSV Division Anni
SH Excavation Dismantelling of G.I. pipe 150 mm dia 850 Rmt.and Relaying of G.I. Tube 150 mm dia 375 Rmt. with butt welding and spot welding of G.I. pipe 150 mm dia at various Rds.. Under PDNA
2026_HPIPH_131777_1
14415-50
Open Tender
Civil Works
Item Rate
60 days
Nirmand
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹8,095
14 Jul 2026
17 Mar 2026
25 Mar 2026
17 Mar 2026
24 Mar 2026
17 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 1 | Cum | - | - |
| 2Dismantelling ofbutt welding GI pipe with cutting of pipes at site the rate onclude entire carriage of material, flushing, cleaning, complete to the bestsatisfaction and direction of Engineer in Charge witin all leads and lifts. (Earth work in trenches will be measured and paid for seperately). | |||||
| 2.01 | G.I. Tube 150 mm dia MC. | - | Rmt. | - | - |
| 3Relaying and binding of dismantelled Gl pipe ( by way of circumfrential butt welded joints by electrical are welding) and testing of Gl pipe of following dia meters confirming to BIS 1239 and capable of withstanding required test pressure in a random length of 4 to 7 meters. including manufacturing reducers/ tapers, all short pieces, beds ete, as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding. jointing, fabrication of bends, tees etc. including testing complete in all respects to the satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). | |||||
| 3.01 | G.I. Tube 150 mm dia MC. | - | Rmt. | - | - |
| 4Providing and Fixing of cast iron sluice valve with flange of following dia Class 1.6 including cost of rubber inspection washer (Gasket) etc. open end with hand wheel confirming to IS: 14846 having test pressure of 10.20 Kg/sqcm. of Leader/Kirloskar make complete in all respect including carriage in all leads and lifts as directed by Engineer-in- Charge. | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.72 MB
terms.pdf
Tender Documents • 0.45 MB
form6.pdf
Tender Documents • 0.37 MB
form8.pdf
Tender Documents • 1.27 MB
BOQ_194869.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .