Renewal/Reconstruction of painted Canal Service Road of Tones Main Canal from Km. 67.130 to Km. 78.900

Amount

Earth work in Construction/Patari & closing and repairing cuts and making daula in service road with approved material obtained from borrow pits with a lift up to 1.50m, transporting to site, spreading graging to required slope and compaction with lead up to 1000m as per Technical specification Clause 301.50. For Proper Complition of Work. As per Direction of Engineer in Charge.

Brick edging on both side of the road of brick class M-150 8 cm wide and 12 cm deep laid with mud mortar including labour and supply of bricks finished to required template and in proper alignment and also including dressing and ramming the excavted earth as directed by the Enginner in charge of the work including material labour and T&P etc. For Proper Complition of Work. As per Direction of Engineer in Charge.

WBM Grading- II Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading II as per MORD specification clause 405. For Proper Complition of Work. As per Direction of Engineer in Charge.

WBM Grading- III Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading III as per MORD specification clause 405. For Proper Complition of Work. As per Direction of Engineer in Charge.

Providing and applying prime coat with bitumen emulsion on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 Kg /sqm as per MORD specification . For Proper Complition of Work. As per Direction of Engineer in Charge.

Providing and applying tack coat with bitumen (VG-10) using emulsion distribution at the rate of 0.30 Kg /sqm on the prepared bituminous/ granular base surface cleaned with mechanical broom. As per MORD specification. For Proper Complition of Work. As per Direction of Engineer in Charge.

Providing laying and rolling of open -graded premix surfacing of 20 mm thickness composed of 13.20 mm to 5.60mm aggregates eitrher using penetration grade bitumen or cut -back or emulsion to required line grade and level to serve as wearing coarse on a previosly prepared base including mixing in a hot mix plant transportation to the site laying with paver finisher to the required grade level and alignment and rolling with a smooth wheeled roller 80-100 kn capacity finished level and grades. For Proper Complition of Work. As per Direction of Engineer in Charge.

Providing and laying seal coat sealing the void in bitumionous surface laid to the specified levels gtades and cross fall using Type C seal coat (As per MORD Specified Clause 510). For Proper Complition of Work. As per Direction of Engineer in Charge.

M/S DHYAN SINGH

M/S SRI SAI CONSTRUCTION