COMPREHENSIVE MAINTENANCE INCLUDING REPAIRS TO JOINERY WALL FLOORING AND PERIODICAL SERVICES OF OTM AND MD ACCN AND REPAIRS AND CLEANING OF SEPTIC TANK SOAKAGE WELL SEWAGE LINES MANHOLES AND REPAIRS TO FENCING COMPOUND WALLS GATES PARKING SHED RETAIN

Amount

Preparating old decorated surfaces of walls (plastered or unplastered) including cornices and pillasters and applying one coat of white washing complete all as specified and directed

All as per item No. 1 above but on ceiling surfaces complete all as specified and directed

All as per item No. 1 above but one coat of colour wash complete all as specified and directed

Preparation of old treated surface of any description over 10 cm girth or width not other wise described and applying one coat of cement base paint on wall surfaces complete all as specified and directed .

Applying one coat of wall care putty to cover old uneven plastered surfaces in wall/ceiling upto 1mm to cover undulations and finished even and smooth using emery paper all as specified and directed .

applying one coat of oil bound distemper on old decorated plastered surfaces of walls including preparation of surfcaes and filling holes and undulations with wall putty all as specified and directed.

Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth(without using extra cement) complete all as specified.

Rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling finished even and smooth (without using extra cement) complete all as specified

Preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.

Preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed .

Applying three coats of whitewash in ceiling on newly palstered surfaces all as specified and directed.

Applying three coats of whitewash on newly plastered wall surfaces all as specified and directed.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper on old plastered surface all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of cement base paint on old plastered surface all as specified and directed.

Preparation of old painted wooden surfaces exceeding 10 cm with or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces exceeding 10 cm with or girth and applying one coat of synthetic enamel paint all as specified and directed.

Writing letters or figures .(Block, Roman, Italic or indian n exc 30cm height all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/matel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

Plain sheet glass 4mm thick, ordinary quality and glazing with oil putty/ wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Figured glass, pin headed type, 3mm thick , and glazing with oil putty/ wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair all as specified and directed.

Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs all as specified and directed.

Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs all as specified and directed.

Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets and fixed in repairs all as specified and directed.

Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs all as specified and directed.

Dismantling water tanks capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.

Dismantling water tanks capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified and directed.

Rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, 500 ltrs capacity all as specified and directed.

Rotational moulded polyethylene water storage tank, ISI marked of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.

15mm dia bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

Stop/ angle valves, 15mm dia,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

Stop/angle valves, 15mm dia for shower rose, fancy type chromium plated cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed.

32/40mm dia expandable type PTMT waste pipe for Wash hand basin/kitchen sink complete and fixed in repairs all as specified and diercted.

25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and diercted.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified and diercted.

Stainless steel plate rack of approved make, size not less than 36 x 36 inches and weight not less than 7.00 kgs each all as specified and diercted.

20mm dia 1.25mm thick stainless steel curtain rod complete and fixed in repairs all as specified and directed

20mm dia curtain rod brackets fancy type as directed complete and fixed in repairs all as specified and directed

Tubular towel rail 20mm dia, brass chromium plated fancy type all as specified and directed.

15mm dia chromium plated cast copper alloy fancy type, two in one combination of bib tap and angle valve fixed in repairs all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 15 mm all as specified and directed.

15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors ccc

Taking up or down steel tubing and connections, bore of pipe 20 mm all as specified and directed.

20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

All as per item No. 52 above, but exceeding 1.5 Sqm and not exceeding 4 Sqm each all as specified and directed.

Taking down shutters exceeding 1 Sqm and not exeeding 2 Sqm each all as specified and directed.

Taking down shutters not exeeding 1 Sqm each all as specified and directed.

Pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc, complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified size of 105 x 60mm all as specified and directed.

2nd class Hard wood 35 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squres with plain chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze all as specified and directed. Note: Glazing and gauze will be measured separately

2nd class Hard wood 35 mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel pegs stay complete with glazing bars dovetailed or welded with glazing bars all as specified and directed.

Steel windows with side hung shutters incl projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Mild steel framed work such grill/ guard bars including fixing on steel window frame all as specified and directed.

Providing plain cement concrete 1:3:6 Type C0 (using 12.50 mm graded stone aggregate) as in filling hollow of pressed steel frame all as specified and directed.

PCC 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing hold fasts and coping including necessary use and waste of form work complete all as specified and directed.

MS Butt hinges medium weight cold rolled 100mm long all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100 mm size all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150 mm length all as specified and directed.

Extruded aluminium alloy handles fabricated type 150 mm size, anodized all as specified and directed.

300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm all as specified and directed.

Single action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Ground or obscured or frosted sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed.

Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty in square but exceeding 0.5 sqm in each pane all as specified and directed.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed.

Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets and end stops 2 Nos in Each opening etc complete all as specified and directed.

Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

12 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs all as specified and directed.

18 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs all as specified and directed.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

4.8mm thk Sheet glass, ordinary quality and glazing with oil putty/ rubber beading in square but exceeding 0.5 sq. m in each pane all as specified and directed.

Aluminium (extruded section body) Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coats of brush bond acrylic polymer modified cement based coating thickness 1mm or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation , providing 20mm thick water proofing screed bed /plaster in CM 1:4 mixed with conplast x 42IC @ 100ml or Pidiproof LW @ 200ml per bag cement. Two coats of Nitro proof 100 bitumen based water proofing over plastered surface complete all as specification of chemical resistant coating complete all as specified and directed. Note: The work shall be executed through authorised applicator of M/s FOSROC/Pidilite using the amterials supplied by M/s Fosroc chemicals India Pvt ltd or M/s Pidilite industrial Ltd and in accordance with their respective manufacturers instructions.

300mm thick lime concrete with lime mortar 1:3 mix and 40 mm graded brick coarse aggregate in sub-floors all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

Non skid ceramic coloured tiles each tile area (square/ rectangle) exceeding 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer with cement mortar 1:4 15mm thick for laying floor finishes all as specified and directed.

Glazed ceramic tiles coloured 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. including 10mm thick in cement mortar 1:3 as backing coat for fixing dado tiles all as specified and directed.

Cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Rolled mild steel work in purlins, rafters, roof truss etc incl cleats/distance pieces etc complete, conforming to Fe-410 W (Gde-E-250) Quality A all as specified and directed.

Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm and thickness not less than 1 mm, members suspended with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long , with 4mm thick designer ceiling board of any texture (Lake & hill, Oceanic, cascade or Electra) as approved by GE, all as per Everest Ceiling grid system "Regular T-2430" or its equivalent make of "Ramco/ Charminar/ Armstrong"

Cleaning the existing SGSW/CI /PVC (SWR) sewage Pipe line of any dia by mechanical means by rodding, jetting and removing all sludge and foreign matters completely and neatly form the pipe line under faul condition (including lines and manholes under blocked/choked condition) and making the sewage lines serviceable for free flow of sewage including blocking of higher level manholes, washing with fresh water to the cleaned line by means of hydraulic/pneumatic/vacuum water jet etc all as specified and directed. These operation shall be carried out strictly in conformity with the provisions of 'Manual scavenging (Prohibition) Act and by following all mandatory safety provisions.

Cleaning of manholes of any size and depth up to 2.00 mtrs under faul condition, by removing MH covers, removing of accumulated liquid, sludge/sediments by mechanical means, transporting the fluid/sludge etc in covered containers by mechanical means and disposing of the same in CPCB approved central STP/ETP facility. Cleaining of the manholes with fresh water and white washing inside MH, including petty repairs of cement mortar/cement concrete(type B-1 1:2:4 using 20 mm graded aggregate and) patch work on holes if any made by rodents of making good to walls, placing the MH covers back in intact in position and setting in cement mortar 1:6 all as specified and directed.

Cleaning and removing individual blockages in IWC/EWC by mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed

All as per item No. 109 above, but for Gully trap/ nahani trap/ floor trap etc including opening the gratings and replacing the covers/ gratings in position and making good complete all as specified and directed

Cleaning of septic tank/sewage sump/ soak well, by removing of sludge and sediments in dry or mud state by machanical means, transporting the fluids/sludge etc in covered containers by manually or machanically and burying the same in pits where directed including necessary excavation, refill and disposal of surplus soil etc, complete, cleaning of septic tank with water, placing the covers intact and removing bush/vegatation near by septic tank to and extent of 3mts around and removing of sewage water from septic tank/sewage sump/soak well through septic tank cleaning lorries having pumping arrangements and carrying the sewage water in tanks of the lorry, having 5000 litres capacity and disposal of the sewage water 15Km away from outside defence area all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. and getting out in hard/dense soil all as specified and directed.

Demolition and breaking up drain pipes (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 150/110 mm including under and hanching of any Cement concrete all as specified and directed.

160mm (outer dia) PVC (SWR) pipes single socketed, in any length, laid in trenches, in floors or fixed to walls complete all as specified and directed.

110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in drains all as specified and directed.

PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement all as specified and directed.

PVC (SWR) bends any radius, 110mm bore all as specified and directed.

PVC (SWR) bends any radius, 110mm bore with access door all as specified and directed.

110mm dia PVC (SWR) junction, single (singleT) equal or unequal with access door all as specified and directed.

Concrete bed to 150mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Concrete bed to 100mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exeeding 25 cm thick using soils all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as in soils all as specified and directed.

Demolition of brick work or stone/ boulder/ block masonry built in cement mortar, including all quoins, arches, pillars, etc all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors n.exc 15 cm thickness ( below or above ground level) all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 all as specified and directed.

Pre-cast cement concrete block masonry type C1 1;3:6 using 20 mm graded stone aggregates with solid blocks, exceeding. 10 cm in width and setting in mortar 1:4 complete all as specified and directed.

Rendering 15 mm thick in cm 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as specified and directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed.

Cement concrete type B1 type B1 1:2:4 using 20mm graded aggregate as in benchings/ copings all as specified and directed.

Precast cement concrete type B1 1:2:4 using 20mm graded aggregateset in cement mortar 1:4 as in cover slabs all as specified and directed.

PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed.

75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection/path laid and finished in bays not exceeding 3 m c/c and filling the joints with mastic bitumen complete all as specified and directed.

100mm thick Cement concrete type D-2, 1:4:8 using 40mm graded aggregate as in sub base all as specified and directed.

Chequerred cement concrete tiles with grey cement and pigment of size 300x300mm x 25mm thick set, jointed and pointed in neat cement slurry incl 15mm thick in CM 1:4 bedding layer of mortar all as specified and directed.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including finishing the outer edge with cement concrete 1:2:4 using 20 mm graded aggregate all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Mild steel bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Rolled mild steel work in purlins, rafters, roof truss etc incl cleats/distance pieces etc complete, conforming to Fe-410 W (Gde-E-250) Quality A all as specified and directed.

Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/S SHAJAHAN BUILDERS

p.chinnasamy