8302 SPECIAL REPAIRS TO LECTURE HALL NO 14 AT DEPT OF ANESTHESIOLOGY AND CRITICAL CARE AT AFMC UNDER AGE BR I GE (CENTRAL) PUNE

Amount

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. cross sectional area less than 40 sqcm in un-framed work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L 2nd class hardwood Plain fillets cross sectional area exc 13 and n exc 25 sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or boards as in fillets, rails, posts, rafters, purlins etc complete all as specified and as directed.

S&F three track sliding window & ventiltors with two or more shutter with including using 5 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

M&L 12mm thick plywood , BWP grade , type BB fixed with screws to timber frame work including 1.5mm thick decorative laminate type - I of surface finished , colour & pattern as approved , fixed with approved adhessive as per manufacturer's instruction complete all as specified and directed

S&F Anodised aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete including 15mm thick ceiling board of Make & model No ARMSRONG OPTRA RH 95 High sound absorption 0.9 NRC or equivalant make as given in Appx 'A' including making nithces for fan , light , etc complete with sound proof Engineering as per Manufaturere's instructions with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 32 x 24 x 2mm and 25 x 24 x 2mm respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

S & F First class Hardwood Moulding as in cornices , picture rail and likes fixed with screws , sectional area exc 6 but not exc 13 Sqmm including necessary polishing complete all as specified and as directed

S&F for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed

Taking down old u/s point wiring( light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators, light fittings etc. removing materials for taking credit and making good the disturbed surfaces of walls/floors/ceiling etc.complete all as specified.

Taking down Main switches/DBs of any make and type including teak wood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash / OBD complete all as specified.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly concealed conduit in wall /roof/ floor along with suitable fittings with modular MS sunken boxes of 1.6 mm thick, of suitable size including modular cover plate/frame for housing modular switches/sockets ISI marked along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following : Note- (i) Making good of distrubed surfaces matching with the surrounding will be done by contractor without any extra cost (ii) Cutting in chases and pointing in will be done by contractor without any cost.

a) One light/fan point controlled by one, One way switch all as specified

b) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board all as specified

c) One three pin 5 Amps socket outlet point controlled by one No one way switch on independant board all as specified

All as per item no. 15 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, IS - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board.

S & F modular switch 6A SP one way 230V, white / ivory finish complete all as specified

S & F modular switch 16A SP one way 230V, white / ivory finish complete all as specified

S & F modular socket outlet 2/3 pin 6 Amps, multipurpose 2 module 230 Volts, single pole, one way suitable for plug tops, complete all as specified.

S & F modular socket outlet 2/3 pin 16 Amps, multipurpose 2 module 230 Volts, single pole, one way suitable for plug tops, complete all as specified.

Supply and fix LED Tube light fittings 2' x 2' sleek ofcapacity 28 watt environment freindly, new generation , aesthetically designed , ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 Volts complete with including all accessories internally pre-wired and necessary mounting arrengement with including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including dismantling old tule light fittings Conforming to Cat Part No. PLUTONE02X2PLR28WLED840S of Make :- Havells or Equivalant as given in Appx 'A' List of make all as specified & directed.

S&F MCB TPN DB 4 way double door with 200 Amps rated busbar 415 V, all as specified.

S & F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 A, 240 Volts complete all as specified.

S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 V breaking capacity , 10 KA , C-curve complete all as specified.

S & F for MCB four pole of rated capacity 63 Amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

Sayili Enterprises

Sai Construction

ANIL CONSTRUCTION CO.

Mourya Enterprises

M/s.BAJRANG CONSTRUCTION

Mukund Engineers and Contractors