Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-Finance Lowest one | |
| 2 | L2₹19.1 L+₹22,467.52 (1.19%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹19.6 L+₹76,286.92 (4.04%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹21.5 L+₹2.6 L (14.0%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹22.0 L+₹3.1 L (16.6%)Rejected-Finance ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
DR HOMI BHABHA ROAD NEW NAVY NAGAR COLABA MUMBAI-05
REPAIR MAINT OF MES INSTALLATIONS AND MAIN SEWAGE LINES IN OUTLYING AREA UNDER GE NW NOFRA COLABA MUMBAI
2022_MES_550739_1
8049
Open Tender
Civil Works
Item Rate
210 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRANil
₹70,000
Yes
6 Oct 2022
8 Sept 2022
1 Oct 2022
8 Sept 2022
26 Sept 2022
21 Sept 2022
8 Sept 2022 - 20 Sept 2022
Amount
Note : The tenderer shall note before quoting his unit rate that certain items of the work shall be executed in high rise building & necessary scaffolding & safety measurement / precautions shall be provided by the tenderer.
Cleaning and desilting of sewage line of any size any depth by pumping out/ removing liquid waste/ sewage, plugging the ends pipes or diverting the flow into drains of necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lightning arrangments face mask etc and remving the same (silt, sludge & other waste material) in leak proof trucks covered with tarpoline to outside MD Land all as per eixting rules and regulations of civil authorities and flushing he sewer lines with fresh water etc complete all as specified abd directed by Engr-in-Charge.
(a) for 150mm dia pipe line
(b) for 200mm dia pipe line
Cleaning and desilting of manholes depth not exc 1.50mtr by pumping out/ removing liquid waste/ sewage, plugging the ends pipes or diverting the flow into drains of necessary, removing silt, sludge etc, sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lightning arrangments face mask etc and remving the same (silt, sludge & other waste material) in leak proof trucks covered with tarpoline to outside MD Land all as per eixting rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified abd directed by Engr-in-Charge.
(a) for depth not exc 1.50m
(b) for depth exc 1.50m but n.exc 3.00m
Note : (a) The above qty is considered for cleaning work will be done on quarterly basis as per plan given and as when required/ regular complaint will be attended simultanously. (b) Contractor shall note that, if the complaint is not attended within 24 hours. The pendalty of Rs 100/- per day will be imposed through RAR/FB.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.
Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement ,complete all as specified.
M&L plastering 10mm thick in CM 1:3 in ceiling finishing even and smooth without using extra cement,complete all as specified.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on 1 to 2 mm thick putty (JK/Birla) complete all as specified.
Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling ,complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
M&L for cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in floor and fisnishing cement concrete surface even, all as directed.
M&L for preparation of surfaces cracks of plaster internal/external of walls, ceilings/ chajjas upto 5mm wide, remove, loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing finishes and preparation of old plastered surfaces of wall and applying two coats of Acrylic emulsion exterior paint of required shade over a coat of exterior primer (as per manufacturer instructions) complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coats of Acrylic emulsion exterior paint of required shade (as per manufacturer instructions) complete all as specified and directed.
Material & labour for providing in repairs water proofing treatment with 4mm APP (Atactic polypropylene) modified polyester(bituminous) membrane reinforced of 3.5Kg/Sqm with non woven polyester mat of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof (An overlap of 100mm and 150mm shall be provided on sides and ends respectively) and applying two coats of bituminous aluminium paint on APP sheet including removal of old damaged APP sheets and removing from MoD land complete all as specified and directed
Material and labour for 10mm thick rendering in CM 1:4 with the addition of shaliplast LW+@ 200ml per bag of cement on fair faces of brick or concrete surfaces, including removing of old plaster/ APP sheets from roof top all as directed.
Material and labour for protecting the roof including parapet wall with water proofing coating, complete as specified below: (a) Clean the surface and apply one coat of primer (STP Shali Urethane BTD diluted in water in 1:1 ratio and applied @ 400 gm/sqm OR Dr, Fixit primeseal diluted in water in 2:1 ratio and applied @ 7-8 sqm/ltr) and allows to dry for 6 to 8 hrs. (b) Apply first coat of water proofing coating over primer surface (Shali Urethene BTD with non butuminous bleding of STP Ltd. @ 1 Sqm/Ltr without dilution OR Dr. Fixit New Coat without any dilution @ 2 Sqm /Ltr) (c) Lay Non woven fiber glass mesh (Reinforcement of Shali Geo Text 40/50 gsm of size 2.5mm x 2.5mm) or equivalent with overlap of 50 mm on both direction while the first coat is still wet. (d) Apply second coat of water proofing coating as per manufactures instruction after 6-8 hrs of drying of first coat. (e) Apply third coat of water proofing coating (as per manucturer instruction) after 6-8 hrs of drying of second coat The total thickness of 1 to 1.2mm must be achieved after 7 days of air cure. Note : 1. The colour of each coat shall be as directed by GE. 2. The work shall be carried out by aithorised applicator only 3 Water proofing to rain water spouts to be done as per manufacturer instr.
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) , complete all as directed.
Taking down chowkats or frames exc 1.5 sqm each but n.exc 4 sqm with shutters (without taking off shutters from the frame) , complete all as directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each, complete all as directed.
M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides
S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified ; supplied and fitted to chowkhats , complete all as specified.
M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified
S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
S&F powder coated aluminium grill with and including suitable powder coated aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section.
S&F 200 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F butt hinges 100 mm mild steel hinges medium weight and fixed.
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
S&F in repairs 18/19 mm thick prilaminated partical boad interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed.
S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
S&F as in repairs aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F as in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
Preparation of old plastered surfaces of walls and apply two coat distemper oil emulsion over 1 to 2mm thick putty, complete all as specified.
M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling .
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles, complete all as specified.
M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles, complete all as specified and directed.
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, including dismantling of old tiles, complete all as specified and directed.
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4, including dismantling of old tiles, complete all as specified and directed.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table, floors and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding including dismantling of old stone slab, complete all as specified and directed.
M&L for machine cut cudappa stone slab 20-25 mm thick laid over screed base in cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old stone slab, complete all as specified and directed.
M&L, for mirror polished machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing incl dismantling of old stone slab complete all as specified and directed.
M&L, for machine cut kota stone slab flooring 20-25mm thick in riser / treads of steps in single piece, skirting, dado and pillar laid over cement screed and jointed withover cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing incl dismantling of old stone slab fixed in any position complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.
Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm in soft/ disintegrated soil or in cement concrete, complete all as specified.
M&L for Cement concrete type C-2 (1:3:6) by using 40mm graded stone aggregate as in foundations, filling and mass concrete
S&F rolled sections as in main & cross beams , columns, hip and jack rafters , purlins where connected to common rafters and running rails & any other places with angles cleats ot other connected plates confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
S&F PVC wall panelling consisting of 5mm thick wood grain printed PVC sheet and fixed over GI running channels 50mm wide and 0.6mm thickness at every 1m interval , fixing over brickwall /concrete walls with screws and all corners, top and bottom portion of PVC lining covered with L/T shaped PVC sheet of same colour/texture including all necessary cuttings near switch boards and other fixtures if fitted over wall, including dismantling complete all as specified.
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling ad mass concrete, complete all as specified.
Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.
M&L old size Brick Work with sub class 'B' bricks, straight or curved on plan to any radias in half brick thick walls, built in cement moter 1:4 complete all as specified.
M&L for cement concrete interlocking paver blocks 60 mm thick having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & removing of old broken tiles, complete all as manufacture instructions specified and directed.
M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI strips/sections main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc, for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern including dismantling of ceiling boards of any thickness etc including grid frame work complete all as specified and as directed. (Make -Armstrong/Chanakya/Everest)
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers , clips,including taking down existing GI water tubing complete with all fittings of 15 mm bore, complete all as specified.
S&F 500 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed position all specified in SSR Part-I, with and including 20mm dia. Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, screwed for iron pipes and fixed; including disconnecting and dismantling/ taking down of existing old unserviceable water storage tank from terrace, complete all as specified and directed by Engineer-in-Charge.
Dismantling of cast iron or reinforced concrete drain pipes upto 100 mm (internal dia of pipe) jointed in cement mortar and taking out of trenches if required or on walls , complete all as specified.
S&F sand cast type 100 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clamps, complete all as specified.
S&F sand cast type 75 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clamps, complete all as specified.
S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) , complete all as specified.
S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 7th floor of bldg., complete all as specified.
S&F in repairs vitreous china wash down water closet pan white (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed.
S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F in repairs vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete all as specified and directed.
S&F in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.
S&F in repairs 15mm size Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs fancy type Pillar taps 15mm size cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.
S&F in repairs CP angular stop cock 15 mm bore all as specified and directed.
Repairing of minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, and the like door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/mails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified.
Repairing of minor complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.
S&F as in repairs stell rolling shutters 1.25mm thickness of laths, without ball bearing as specified including top cover, anchoring rod, hasp and staple, erected in position as indicated, complete push pull or manual type including taking down old rolling shutter complete all as specified.
Taking down rolling shutter of any type incl taking down accessories like shaft, top cover, guide channel after straightening/ rectify wraped/ buckled parts and replacing unserviceable components with new and including cleaning/ overhauling greasing etc including re-fixing complete to walls/ RCC members all as directed by the Engineer-in-Charge. (All new components/ accessories will be measured and paid separately as supply only under relevant item of schedule)
Supply and fixing rolling shutter of having thickness 1.25mm of laths without accessories including hood cover & locking arrangement, complete all as specified and directed.
Supply and fixing MS suspension shaft of dia 50mm incl springs suitable for rolling shutter, complete all as specified.
Supply and fixing guide channel of width 65mm wide & 25mm deep and 3.15mm thick all as specified and as directed by Engr-in-Charge.
Supply and fixing ball bearing for 40 to 50mm dia shaft of rolling shutter upto 6.0m width all as specified and as directed by Engr-in-Charge.
S&F as in repairs 3mm dia galvanised steel wire, mesh of any size and type made up int mattresses ot cages, lappedm wired and laid in position, including line wires, any mesh, size and type to any of standards, rails, straining bolts etc, including provision of binding of binding wire, complete all as specified.
SN CONSTRUCTION
M/S - R K CONSTRUCTIONS
Unitech Enterprises
B P ENTERPRISES
I.J Enterprises
NATH CONSTRUCTION
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .