REPAIR/REPLACEMENT OF STREET LIGHT AND REPAIR/MAINT OF LT DISTRIBUTION SYSTEM AND ALLIED WORKS AT DABATHWA AREA UNDER AGE E/M (ES AT GE(U) MEERUT CANTT

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Supplying and fixing in replacement 50 mm nominal bore Galvanised mild steel pipe /tubing, light grade for protection of earth lead / passing cable complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified (Excavation & Earth work , Mild steel clamps, bolts , nuts and washers shall be measured and paid separately)

M&L for fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry to over electric cable for protection all as specified.

Material and labour for river sand, unwashed and screened dry ) for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)

S&F in repairs 3 core , stranded copper conductor cable 2.5 sqmm, PVC insulated and PVC sheathed , 1100 Volts grade for making connections to street light fittings complete all as specified and directed.

Supply laying, jointing, testing and commissioning LT XLPE, PVC insulated, PVC sheathed armoured LT cable 1100 volt grades heavy duty with aluminium stranded conductor through pipes, in duct, on poles, open or in trenches etc complete including taking out old cable of following sizes .

16 Sqmm, 4 core.

25 Sqmm, 4 core.

240 Sqmm, 3.5 core.

185 Sqmm, 3.5 core.

120 Sqmm, 3.5 core.

35 Sqmm, 3.5 core.

Supplying and fixing in repair connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 90 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets made of FI 40mmx6mm, comprising 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers or providing reducers and GI pipe of size suitable for exixting top fixed bracket duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

Supplying and fixing in repair connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 70/72 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets made of FI 40mmx6mm, comprising 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers or providing reducers and GI pipe of size suitable for exixting top fixed bracket duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

Supplying and fixing Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron / Mild steel base plate, CI finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work in soft/ loose soil , PCC 1:3:6 type C2 in foundation and around poles and PCC 1:2:4 type B1 as in plinth block duly finished even and smooth without using extra cement, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting exposed surafces steel tubular poles with two coats of aluminium paint over one coat of red oxide primer and black bituminous paint on steel surafces embedded in concrete and providing 300 mm wide bands (5 bands/ straps with fluorescent synthetic enamel paint in alternate colour of black and white from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and shown in drg No.TD/EM/1 including taking out old electric pole and incluidng making good disturbed surface.

M&L for preparation of old painted surfaces of erected steel tubular swaged poles / Rails/Girder poles of LT over head line ( Except embedded portion) , 9 M long including all MS work mounted on pole , earth protection & water pipe ( if exists) and providing one coat of aluminium paint and providing 04 Nos bands/ straps with two coats of Retro Reflective paint ( black and red 30 cm wide each) from top of plinth block and numbering of poles with white Retro Reflective paint on yellow Retro Reflective piant ground (50mm wide and 100mm high letters) including encircling the letters or figures complete all as specified

Trimming/ lopping branches of tree touching to LT/HT OH lines not exceeding 30 cm girth , shrub, vegetation, bushwood and saplings at least upto 3 M from outer edge of ACSR conductor including removing of braches of trees etc. to a distance exceeding 100 m and not exceeding 150 M complete all as specified and directed. Note :- (i) Shutdown wherever required shall be taken in writtig from Engr-in-Charge. (ii) Distance between two consecutive poles shall be measured as one span.

S&F 40 mm nominal bore GI pipe brackets made out of light grade pipe of required length not less than 1.50 M duly bended and fabricated to 120 Degree to shape consisting adapter (where required ) to suit the opening of street light fitting, mounting brackets made out of 350 mm long or higher mild steel FI 40x6 mm required shape ( two Nos per GI pipe brackets ) duly fitted with 4 nos Mild steel bolts 10mm dia ,50mm long with nut and washers to poles etc. and painting with two coats of synthetic enamelled paint over one coat of red oxide primer; complete all as specified.

Taking down LED street lights fittings from pole/ walls, opening of street light fittings of any type, wattage and make, making the light fittings operational to give the rated illumination by repairing/ renewal/ replacement of components viz PCB, driver, LED bulbs, electronic circuit and other minor defective parts and refixing the street light in its original position and reconnecting with renewed cable of Twin core 2.5 sqmm stranded aluminium conductor cable ,PVC insulated and PVC sheathed cable of required length complete all as specified and directed. Note:- PCB & Driver shall be measured and paid separately as 'Supply only' under relevant item. (ii) Reparing to street light fittings shall be carried out at MES store yard of AGE E/M (ES) at Meerut.

Supply only PCB suitable for 45 to 72 watt LED light fittings, 140V to 270V universal PCB with built in surge protection>5KV, 50 Hz +/- 3%, P.f.>0.95, Thd<10% with system efficiency >85 lumens per watt and power efficiency >= 90% and protection IP 65.

Supply only Driver suitable for 70/72/90 watt LED light fittings, 140V to 270V universal driver with built in surge protection>5KV, 50 Hz +/- 3%, P.f.>0.95, Thd<10% with system efficiency >85 lumens per watt and power efficiency >= 90% and protection IP 65 or better .complying LM-79/IS:16106.

M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line coming in the route not exceeding 1.5 m in depth below existing surface level of road and not exceeding 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any damage to existing cables , pipe lines or any other damages shall be made good by the Bidder without any extra cost to department.

S&F in repair FRP pole mounting type junction box factory made of size 300x200x105mm with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails and MCB SP 6/10 Amps, 10 kA, suitable for domestic loading -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.(MCB shall deemed included in the unit rate)

Supply and fixing in replacment of nature switch complete with timer , contactor, relays and suitable rating MCBs for incoming and out going in built in suitable IP 66 enclosure of three phase integrated models of capacity 8 KW complete all as specified and directed.

Supply and fix in repair Fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded single core aluminum conductor 1100 volts grade of size 2.5 Sqmm of suitable length for street light terminal to over head conductor complete all as specified

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast RCC cover 40 mm thick in plain cement concrete 1:2:4 type B1 duly reinforced with 8mm dia TMT bars @ 150mm c/c with 10mm dia MS round bar as in lifting handles, mild steel angle iron frame for pit cover made out of 40x40x5mm thick duly painted with two coats of ssynthetic enamel paint over a coat of priner , excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 03 of SSR Part I including taking out of old earthing material.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI strip 32x6 mm .(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast RCC cover 40 mm thick in plain cement concrete 1:2:4 type B1 duly reinforced with 8mm dia TMT bars @ 150mm c/c with 10mm dia MS round bar as in lifting handles, mild steel angle iron frame for pit cover made out of 40x40x5mm thick duly painted with two coats of ssynthetic enamel paint over a coat of priner , excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 03 of SSR Part I including taking out of old earthing material.

Lowering of high mast light assembly from upto 16/12 Mtr high mast,any type,make and wattage, dismantling, checking and taking out of unserviceable/defective parts and components for replacement, and making the light fittings operational to give rated illumination incl cleaning the acrylic/ glass cover and refixing the same after repair/replacement of defective components complete with necessary electrical connection with by providing two single/twin core 2.5 Sqmm PVC sheathed multi stranded aluminium conductor cable of required length and testing complete all as specified and directed. Note :-Spare parts/components to be replaced shall be measured and paid separately under respective item of sch 'A'. The cost of greasing of pully, roller, bearing and gear including refixing of rope clamps, adjustment of lock, leaver etc shall be deemed to included in the quoted rate.

Supply and fixing in replacement LED Flood light 150 watt 230 volt (for High Mast Light ) AC pressure dia cast housing outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver lamp necessary bracket, clamps and nuts & bolts etc required for fixing light fittings on ploe/ wall etc. complete all as directed.

S&F in repair MCCB, 4 pole, 50 Hz, 250 Amps, 16kA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

S&F in repair MCCB, 4 pole, 50 Hz, 200 Amps, 16kA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

S&F in repair MCCB, 4 pole, 50 Hz, 160 Amps, 16kA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

S&F in repair MCCB, 4 pole, 50 Hz, 100 Amps, 16KA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

S&F in repair MCCB, 4 pole, 50 Hz, 63 Amps, 16KA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

S&F in repair MCCB, 4 pole, 50 Hz, 400 Amps, 25KA, rupturing capacity thermal adjustable type duly connected with copper spreader links and proper size lugs, nuts, bolts and washers for proper connections, all as specified and directed.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregated as in foundation, filling and mass concrete using necessary form work complete all as directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregated as in foundation, filling and mass concrete using necessary form work complete all as directed by Engr-in-Charge.

M&L pin type, porcelain, vitreous, white or green insulator (LT), 100mm height and 65mm dia, 1100 volts grade including one galvanised MS spindle, two GI washer and one GI nut complete including taking down old U/S insulators.

Taking down old unserviceable switchgear panel board and Supplying, installing, commissioing and testing of LT switchgear panel board of size 1000mmx800mmx400mm (min) , IP-54 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , having busbar chamber for and including 400 Amps insulated Aluminium bus bars , 4 pole , cubical type, factory made out of 3.00mm thick CRCA sheet structure mounted on Platform (as per Sketch), rigid mild steel angle iron frame of 50mmx50mmx5mm with 750mm long extended legs grouting in PCC platform , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangements for dust and vermin proof ,complete including suitable size cable allay, lugs , cable glands and making connections with MCCB spreaders, wiring with suitable size SC PVC insulated copper conductor cable, 65mm size lock with keys comprising of the followings and specified hereafter:-

MCCB 4 pole,250Amps, 415V, 25 kA (Ics=100% Icu), 50 Hz, with adjustable thermal and fixed magnetic setting -01 No.(incoming)

LED type indication lamps ( R-Y-B) with holder panel mounting type complete all as specified. -01 No.

MCCB 4 pole, 160Amps, 415V, 25 kA (Ics=75% Icu), 50 Hz with adjustable thermal and fixed magnetic setting , -02Nos.(outgoing)

MCCB 4 pole, 100Amps, 415V, 25 kA (Ics=75% Icu), 50 Hz with adjustable thermal and fixed magnetic setting , -02Nos.(outgoing)

Drawings of LT panel shall be got approved by GE before placing order for procuring.

Supply & Fixing in existing pole smart integrated Solar street light(12 Watt All-in-one standard) with built in Mono Crystalline Panel Lithium Ferro Phospate (LiFePO4) Battery ,MPPT Charge controller and PIR sensor with colour temprture 6000-6500K with 150 lm/Watt .02 days autonomy with dimming profile including all necessary MCBs, wiring connection and nuts, bolts, washers, clamps with all fixing arrangement required at site complete all as specified and directed.

Supply and fixing LED light (TRI COLOUR - SAFFRON ,WHITE,GREEN) 50 Watt with 3 mtr coloum with die cast aluminium pipe housing with cylindrical opal polycarbonate diffuser designed for rugged outdoor usage CCT 5700 K , efficacy 95lm/Watt , with IP65 degree of protection & impact resistance with foundation of size (0.35x0.45x0.55 mtr ) with proper grouting complete all as specified and directed.

BHAGWAN DAS & Co

SIYA ASSOCIATES

D S Enterprises

M/S JPS Electrical Engineer & Contractor

janta tradrers