CA NO CWE/PAT/T-37/2021-22 CERTAIN ADDN ALTN TO JCO OR ACCN AND PROVN OF STORAGE SPACE INFRASTRUCTURE DEVELOPMENT FOR ADOU AT PATIALA UNDER GE SOUTH PATIALA

Amount

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Excavation in trenches is soft/loose soil n.exc 1.50m wide and n.exc 1.50m in depth and getting out complete all as specified and as directed.

Excavation in trenches is soft/loose soil n.exc 1.50m wide, exc 1.50m but not exceeding 3.00m in depth and getting out complete all as specified and as directed.

Excavation over area not exc 1.5m deep and getting out in soft / loose soil and and removal of excavated soil exc 250m but not exc 500 m for filling under floor, spreading levelling and compacted in layers complete all as specified and as directed.

PCC type D2 1:4:8 (using 40mm graded stone agg) as in foundations, filling and mass concrete complete all as specified and directed.

PCC type C-2,1:3:6 (using 40mm graded stone agg) as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, unframed work in any position complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position complete all as specified and as directed.

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span but not exceeding 8.00 m span and removimg from site complete all as sdpecified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sdpecified and as directed.

Dismantling of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and as directed.

Brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and as directed.

Brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

15mm thick cement plastering in cement mortar 1:4 on brick or concrete surfaces of wall finished fair and even without using extra cement, complete all as specified and as directed.

10mm thick cement plastering in cement mortar 1:6 finishing even and smooth without using extra cement complete all as specifiec and as directed.

Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl use and waste of all necessary form work complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

MS work as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

MS pipe ERW vertical members and gusset plate etc including purpose made anchure bolt and nuts washers complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Preparing new or previously untreated surfaces of steel of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and as directed.

Preparing new or previously untreated surfaces of steel of any description not otherwise described width or girth not exc 10 cm and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and as directed.

Preparation of new plastered surface or unplastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint complete all as specified and as directed.

Preparation of old plastered surface or unplastered surfaces of walls by complete removal of old treatment and applying two coats of cement based paint over one coat of alkali resistant cement priming paint all as specified and as directed.

Preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coat of Oil Bound Distemper over a coat of Chalk whitening / wall care putty with smooth surface complete all as specifie and as directed.

Preparation of old plastered or unplastered surfaces of walls by complete removal of old treatment and applying two coats of Oil Bound Distemper over a coat of Chalk whitening / wall care putty with smooth surface complete all as specifie and as directed

PVC insulation panels 10mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S complete all as specified and directed.

Anodised aluminium snap grid frame work for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Taking down chowkhat or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good to required shape for hold fast block for new frame complete all as specified and as directed.

Taking down chokhats or frames (without taking off shutters from the frame) not exc 1.5 sqm incl cutting holes and making good to required shape for hold fast block for new frame complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening complete all as specified and as directed.

100 mm size PVC butt hinges complete all as specified and as directed.

125 mm PVC handles complete all as specified and as directed .

200 mm long PVC tower bolt complete all as pecified and as directed .

Steel windows box type using ERW hollow 'P' section comprising double frame for gauged and glazed skelton shutter jointed internally with flat iron 40x3 mm complete incl hinges, handles, tower bolts, stops, lugs including grill of 12 mm square/ round bar as directed fixed horizontally @ 10cm centre to centre etc complete with one shop coat of red oxide or zinc chromate primer all as shown on drawing Drg No 219 (c) complete fixed in repairs i.e, incl taking down and removal of old steel windows from site or to store complete all as specified and directed.

Pressed steel frames size of frame 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

35mm thick plain framed (Factory made) pannelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm BWP commercial ply or 12mm thick vereered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003(Part-I) complete all as specified and as direced.

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Mild steel barrel tower bolts 200 mm long , stove enamelled black, with bright bolt complete all as specified and as directed.

Mild steel pressed handles oval type stove enamalled black 125mm size complete all as specified and as directed.

Mild steel sliding door bolts, 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

MS butt hinges 100mm long cold rolled, medium weight complete all as specified and as directed.

300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.

Preparing old steel surfaces of any description and girth over 10 cm and applying two coats of synthetic enamal paint complete all as specified and as directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

75 mm thick Cement concrete 1:4:8 type D-2 using 40mm crushed stone aggregate as in sub base under floors complete all as specified and as directed.

100mm thick Cement concrete 1:4:8 type D-2 using 40mm crushed stone aggregate as in sub base under floors complete all as specified and as directed.

25mm thick Cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in sub base under floors complete all as specified and as directed.

Reinforced Cement Concrete in foundation 1:2:4 type B-1, using 20 mm graded stone aggregate as in sub base of foundation complete all as specified and as directed.

S & F Machine cut Kota stone slab flooring 20mm (+/- 2mm) thick laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S & F Machine cut Kota stone slab in skirting / dado 20mm (+/- 2mm) thick laid over and including 10 mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

50 mm thick Cement concrete 1:3:6 type C-2 using 20mm graded crushed stone agg as in plinth protection complete all as specified and as directed.

Mild Steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 30 cm long diameter of neck 12 mm complete all as specified and as directed.

Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:4 over and including 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate finished fair and even complete all as specified and as directed.

Coloured glazed ceramic joint free tiles of size 200mm x 300mm x 7mm thick as in dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10mm thick bedding layers in cement mortar 1:4 complete including taking down existing tiling/cement plaster/ any other type of Skirting / Dado & preparation of surface to receive fresh screed layer complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore or connection and removal from site or to store complete all as specified and as directed.

Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore or connection and removal from site or to store complete all as specified and as directed.

Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for 15mm bore pipe fixed as in repairs complete all as specified and as directed.

Stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed for 20mm bore as in repair complete all as specified and as directed.

Stop cock fancy type, brass chromium plated with long shank and cup (concealed type) 15 mm bore fixed in repair complete all as specified and as directed.

Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified and as directed.

Rotational moulded polythene water storage tanks of capacity 500 lit, hoisted and fixed in position including 20mm bore brass ball valve high pressure with polythene float and fly nut incl 32mm dia wash out with plug complete including dismantling of old water tank of any size or specification complete all as specified and as directed.

450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality fixed in repair complete all as specified and as directed.

PVC valveless syphonic action type Flushing cistern low level, 10 litres capacity, with inlet ball valve and all standard accessories including 32mm dia PVC flush pipe fixed in repair including connections and making good the disturbed surfaces in CM 1:3 complete all as specified and as directed.

Vitreous china wash hand basin off white flat back size 550 x 400mm, including 32mm CP brass waste fitting, 32mm PVC waste pipe, cast iron brackets and PCC 1:2:4 type B-I using graded stone aggregate for embedding brackets and making good disturbed surfaces in CM 1:3 complete fixed in repair complete all as specified and as directed.

Brass chromium plated shower roses 125mm size with swivel joint including CP arm and wall cap, suitable for 15mm bore concealed pipe complete fixed in repairs complete all as specified and as directed.

Viterous china squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc fixed in repair complete all as specified and as directed.

Cast iron soil waste and vent pipe of bore 100mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints laid in trenches or in floors fixed in repairs complete all as specified and as directed.

Cast iron soil waste and vent pipe of bore 75 mm centrifugally cast, ISI marked, in any length with or without ears with run lead joints laid in trenches or in floors fixed in repairs complete all as specified and as directed.

Cast iron floor trap with 75mm dia of out let with stainless steel grating incl jointing to waste pipe in run lead fixed in repair complete all as specified and as directed.

Cast iron branch pieces double, (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches, suitable for 100mm bore pipe, as in repairs, jointed in run lead complete all as specified and as directed.

Special type cast iron ‘P’ or ‘S’ trap having 300mm to 450mm long tail suitable for 100mm dia CI pipe incl jointing to waste pipe in run lead fixed in repair complete all as specified and as directed.

Cast iron cowls 75 mm dia of pipe fixed in repair complete all as specified and as directed.

Cast iron cowls 100 mm dia of pipe fixed in repair complete all as specified and as directed.

Salt-glazed stoneware gully traps 150 x 150mm, round mouthed 'P' type with CI grating, setting and jointing to drain in cement mortar 1:1, including cement concrete 1:2:4 type B-1 in bed, surrounds and kerbs, fixed as in repair including making good to disturbed plinth protection with matching to surrounding complete all as specified and as directed.

Cast iron bends (any radius) diminishing pieces or tapers of size 100mm fitted with oval access door, fixed in repairs complete all as specified and as directed.

Cast iron bends (any radius) diminishing pieces or tapers of size 75mm with inspection eye, fixed in repairs complete all as specified and as directed.

Cast iron bends (any radius) with ducks foot or heel rest of size of 100mm fixed in repairs complete all as specified and as directed.

Reinforced cement concrete M-25 (Design Mix as in column and footings etc complete all as specified and as directed.

Form work to sides of pillars, posts, struts, column and stanchions rough finished surface in square, rectangular or polygonal complete all as specified and as directed.

Reinforced cement concrete M-25 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies and in shelves and the like complete all as specified and as directed.

Reinforced cement concrete M-25 (Design Mix) as in Column, pillars, post and struts etc complete all as specified and as directed.

Reinforced cement concrete M-25 (Design Mix) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slab (plinth, lintal band) and the like complete all as specified and as directed.

Form work to sides of beams etc complete all as specified and as directed.

10mm dia and over TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

8mm dia TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L for Mild Steel rolling shutters of 1.25mm thick MS sheet, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type complete all as specified and as directed.

Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, glazing bars, dovetailed or welded complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with old size sub class 'B' bricks complete all as specified and as directed.

50mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor complete all as specified and as directed.

Forming Construction joint 30mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and as directed.

Machine Pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed.

25mm thick sand cushioning, filling under floors including watering and consolidation complete all as specified and as directed.

Broken Stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured)

Chain link mesh made out of 3.15mm dia GI plain wire average size of mesh 100mm x 100mm, including 4mm dia GI line wire at top and bottom, fixed to any type of rails or posts complete all as specified and as directed.

M&L for Mild Steel screw bolts (machine made) 5mm to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n.exc 10 cm long each bolt complete all as specified and as directed.

M&L for Mild Steel round bars, cut to length required including bending hooks / ends as directed or welding for overlaps as in ties for fencing etc conforming to Grade-I IS-432 (Part-1) or Fe-410-W (Grade E-250) Quality 'A' or Fe-290 (Grade E-165) complete all as specified and as directed.

Preparing ends of steel posts as in fencing and treated with coal tar or black paint area tarred exc 0.10 Sqm but n.exc 0.50 Sqm each complete all as specified and as directed.

Framed work for ornamental and intricate design such as grills, gratings, etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

20 mm thick Granite (of any type) tiles machine cut, in skirting / dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft / loose soil each n exc 0.5 cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, complete all as specified and directed.

PCC type C-2, 1:3:6 (using 20mm graded stone aggregate) in fdn filling and mass concrete complete all as specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc complete all as specified and as directed.

Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches, sockets with modular cover plates (base plate and outer) with and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for One light / fan / Bell point controlled by one, one switch complete all as specified and as directed. Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.

All as per item No 116 here in before but for One socket outlet 6 A on same board complete all as specified and as directed.

All as per item No 116 here in before but for One socket outlet 6 A on independent board complete all as specified and as directed.

Concealed point wiring with 2.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated and unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes suitable for mounting modular switch / socket with modular cover plates (base plate and outer) complete including FRLSH PVC insulated and unsheathed single core multistranded copper conductor cable of size 2.50 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one 16 Amp Socket outlet on independent board complete all as specified and as directed.

Modular switch 1 way 6 A, 1 module complete all as specified and as directed.

Modular switch 1 way 16 A, 1 module type complete all as specified and as directed.

Modular socket 6Amps 2/3 pin combined 2 module complete all as specified and as directed.

Modular socket 6/16Amps 2/3 pin combined 2 module complete all as specified and as directed.

Modular Fan step regulator, 120 watt 2 module complete all as specified and as directed.

MCB, SP 6 to 32 A, 10 KA, 'C' curve complete all as specified and as directed.

MCB, SPN, 32 A, 10 KA, 'C' curve complete all as specified and as directed.

Exhaust fan 300 mm sweep matelic body AC single phase 230 V with self closing louvers including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to exhaust fan complete all as specified and as directed.

Energy saving LED light fitting, 1 x 20 watt, 230 volts, Self Ballasted LED batten extruded thermoplastic body with PC Diffuser with square shape lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD<10% suitable for surface / pendant mounting with all accessories including and connecting with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and as directed.

New generation energy saving and environmental friendly long life LED building security light 1 x 25 watts made up of pressure die cast aluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate drive compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable braket with 32mm bore light grade GI pipe bend to shape, including MS clamp of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fitting complete all as specified and as directed.

LED mirror light with Linear and compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and as directed.

Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 1 x 10W LED edge-lit LED luminaire comprising of high brightness LEDs of capacity 10 watt complete all as specified and as directed.

Water heater storage type, electric, capacity 25 litres, BEE 5 star rated complete all as specified and as directed. Note : Fixing of geyser on wall with suitable size anchor bolt with hammer drill and making good the disturbed surface with existing including plaster work shall be part of job at no extra cost.

Supply and lay in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 16 sqmm 2 core complete all as specified and as directed.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 16 sqmm 2 core complete all as specified and as directed.

Supply and lay in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 10 sqmm 2 core complete all as specified and as directed.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 10 sqmm 2 core complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed

Sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable and punning down the sand to 18 cm thickness.). Complete all as specified and as directed. (Note:- Only punned thickness 18 cm of sand shall be measured for payment purposes).

Unreinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm for protection of cable 1100 V complete all as specified and as directed.

Old size brick well burnt, laid flat for cable protection complete all as specified and as directed.

GI tubing light grade 32mm bore for passing through cables under the floor along the wall or along the pole complete all as specified and as directed.

GI tubing light grade 40mm bore for passing through cables under the floor along the wall or along the pole complete all as specified and as directed.

Ceiling rose surface type, 65 mm x 50mm two to three terminals / PVC / Polycarbonate, isolated body fixed on PVC block complete all as specified and as directed.

Epoxy powder coated MCB, DB, double door SPN 12 way for MCBs with common bus bar at incoming end of outgoing MCBs grouted / flush to wall fixed in repair complete all as specified and as directed.

Epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus bar at incoming end of outgoing MCBs grouted / flush to wall fixed in repair complete all as specified and as directed.

Lamp holder with LED bulb 9 W including flexible wire 0.5 Sqmm copper cable complete all as specified and as directed.

Epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus bar at incoming end of outgoing MCBs grouted / flush to wall fixed in position complete all as specified and as directed.

Epoxy powder coated MCB, DB, double door SPN 4 way for MCBs with common bus bar at incoming end of outgoing MCBs grouted / flush to wall fixed in position complete all as specified and as directed.

Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and as directed.

Sheet metal enclosures distribution board, double door three phase, 415 volts, 4 ways(one incoming three phase and four out going three phase) for MCB ISOLATOR and MCB's comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following :- (a) MCB Four Pole 40 Amps AC 415 Volts 10 KA - 01 as incoming Note : (i) Connection of the MCBs with cable shall be made through appropriate size pin / bottle type thimble properly crimped. (ii) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (iii) Double continuous earth wire shall be provided for each three phase DB from earthing main dolly.

Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLS stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4.0 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and as directed.

Sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRLS stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 2.5 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and as directed.

Sub main wiring with two single core 1.5 Sqmm PVC insulated and unsheathed FRLS stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 1.5 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and as directed.

LED flood light fitting 80W with all fixing arrangement including LED complete with IP 65 protection suitable for operating voltage 180 to 240 V with active power factor correction electronic gear and housing of pressure die cast aluminium alloy duly pre wired including provisioning of cable with aluminium conductor, multistranded from fitting to line complete all as specified and as directed.

M/S Mukesh Kumar Gupta

HG construction

M/S RAJ KUMAR GUPTA

M/s Amit Associates