Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.1 L+₹1.2 L (6.53%)Rejected-Finance 21 NEAR LAL KOTHI CHANDER NAGAR SAHARANPUR UP 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L2 | Rejected-Finance Rejected being not L1 | |
| 3 | L3₹22.4 L+₹3.5 L (18.6%)Rejected-Finance | L3 | Rejected-Finance Rejected being not L1 | |
| 4 | L4₹22.8 L+₹3.9 L (20.9%)Rejected-Finance 3491 14 HARIPURA DHAPAI ROAD AMRITSAR | AMRITSAR | PUNJAB | 143001 | L4 | Rejected-Finance Rejected being not L1 | |
| 5 | L5₹28.5 L+₹9.7 L (51.2%)Rejected-Finance | L5 | Rejected-Finance Rejected being not L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) ROORKEE
Garrison Engineer Roorkee
COMPREHENSIVE MAINTENANCE TO CERTAIN BUILDINGS AT POCKET-9 (RTS AND DEPOT) IN AGE B/R-III (SAHARANPUR) UNDER GE ROORKEE
2023_MES_628596_1
8392/321/E8
Open Tender
Civil Works
Item Rate
180 days
SAHARANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (MES) ROORKEE
₹70,000
Yes
13 Jan 2024
16 Nov 2023
18 Dec 2023
16 Nov 2023
14 Dec 2023
30 Nov 2023
Amount
Materials and labour, brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks masonry built in cement mortar complete all as specified and directed.
All as per item 1 here-in-above but except bricks complete all as directed. Note :- Serviceable bricks obtained from demolition against item no 1 here-in-before shall be reused.
Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M & L for rendering 15mm thick on wall in CM 1:4 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick in CM 1:4 on external faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including preparation of new plaster surfaces of wall and applying two coats white wash complete all as specified and directed.
M & L for rendering 10mm thick on wall in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including preparation of new plaster surfaces of wall and applying two coats white wash complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
PCC 1:2:4 type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor etc 100 mm thick finished even and smooth without using extra cement laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed.
Forming contraction (Dummy) joints, 65mm deep and 10mm wide filled with sealing compound grade'A' complete all as specified and directed.
M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling course (avg thickness 40mm) complete all as specified.
M & L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.
Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
M&L 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.
M&L asbestos cement serrated ridges for corrugated sheets or semi corrugated sheets fixed with L or J type or cranked hook bolts, complete all as specified and directed.
S&F 0.63 mm plain galvanized mild steel sheeting in ridges, hips, valley gutters, drips and straight flashing (Length and Girths as fixed) with grade of zinc coating 275 complete all as specified and directed.
Fixing only 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows etc complete all as specified and directed.
S&F Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
M&L framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.
S&F 3mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5m in each pane complete all as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E- 165) complete all as specified and directed.
S&F tubes medium grade 15 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed.
All as per item No 32 above but 20mm bore.
S&F in repairs bib tap 15mm dia cast copper alloy with brass spindle confirming to relevant IS complete all as specified. Make : Prayag Cat No 7302 OR EQUIVALENT.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish,including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed complete all as specified and directed
M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) n exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.
S&F 35 mm thick IInd class factory made HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Factory made 35 mm thick 2nd H.W plain framed paneled shutters (two panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed..
S & F factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at site as per specification and drawing complete all as specified and as directed.
M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete all as specified and directed.
S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.
S&F MS Butt hinges medium weight cold rolled 100mm size ISI Marked complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt ISI Marked of extruded section , length of bolt 200 mm complete all as specified and directed.
S&F Aluminium handles, cast type, anodised 150mm long ISI Marked complete all as specified and directed.
S&F in mild steel pressed handles, 150mm long, oval type, stove enameled black ISI Marked complete all as specified and directed.
S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate ISI Marked complete all as specified and directed.
S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.
Taking down wall/ceiling boards Asbestos/plywood of any thickness incluing cover fillets complete all as specified and directed.
S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over 15 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of existing tiles complete all as specified and directed.
M & L for 350x 250x 7 mm/ 450X 350X 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to receive dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.
S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified and as directed (Make : Prayag Cat No.522 or equivalent).
S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and as directed.
S&F in repairs 10 ltrs PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminum brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing including seat cover complete all as specified and as directed.
S&F in repairs, Vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete all as specified and as directed.
S&F in repairs, Vitreous china wash hand basin, white flat back size 550x400mm (excluding taps), including waste, pipe chain and plug including porcelain stopper and a pair of MS bracket duly painted with 2 coats of synthetic enimel paint over a coat of red oxide primer etc complete all as specified and as directed.
S&F in repair ball valves of 15 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed.
M&L for white color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and as directed.
JBN CONSTRUCTION
SMG Construction
AMARJEET SINGH AND CO.
M/S STAR CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .