PMGSY/SONARI/2025-26/02

Maintenance of Earthen shoulder (Filling with fresh selected soil) 1.Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipmentat OMC upto a lead of 1000m as per technical specification Clause 1903

Stripping of excess soil 2.Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compaction to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5. (i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401( with an initial lead of 5 Km.) i) for Gr. II material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compaction to the required density as per Technical Specification Clause 405. Gr.III

Providing and laying inter locking concrete block pavement (M30)having thickness 80 mm as per technical specification clause 1504 complete. (inclusive Edge restraints and carrige) (Rate is exclusive0f 125 GST, 1% LWC & 0.50% SWATCH BHARAT)

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. D PCC Grade M25 (i)Using concrete Mixer

Single bamboo spur and palisading of whole 1st class bamboo (Bholuka or Barua) 85 mm to 100 mm dia. Closely packed & driven including fitting, fixing with half 2nd class bamboo (jati or Bethua) horizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood in the spur as per drawings and technical and providing brush wood in the spur as per drawings and technical specifications . A Driven at least 900 mm below ground and 1800 mm above ground

Supply, filling, and stacking in place, sand filling gunny bags (Empty cement bag) including tying with coir string, carriage within 30.00m and cost of sand complete as directed by the department.

Construction of bamboo barricade with 180cm bamboo posts 60cm below ground and 120cm above ground placing at a distance of 200cm from each other tying bamboos parallely in three rows with G.I wire as per specification.