ADDITION/ALTERATION CUM SPECIAL REPAIR TO CERTAIN OTM ACCN AT AGRA

Amount

Demolition floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the ground level complete all as specified and directedl.

Removing building materials to a distance of 1.0 Km, including loading, unloading and stacking at the destination complete all as specified and directed. Note:- Measurement of Per load shall be taken as per section 21 . .

M & L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

M&L vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, on vertical surfaces such as skirtings, dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for coloured glazed digital ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed or bedding layer of mortar in CM 1:4 as in verticle surface etc complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each coloured tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed.

M & L for GI powder coated snap grid frame work for false ceiling comprising of the following section for making partition of 600 mm x 600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main tee shall be 32 x 15 x 0.30 mm, cross tee shall be 32 x 15 x 0.30 mm thick with black lining in mid portion and wall angle shall be 24 mm x 24 mm x 0.30 mm thick complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling asbestos cement (corrugated semicorrugated ,etc) sheets in roof covering including L type or J type hooks or cranked bolts etc complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating AZ -150 , GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with suitable washer complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with suitable washer complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in floor complete all as specified and directed

Demolition of brickwork built in cement mortar including all quoins arches pillar etc complete all as specified and directed.

M&L for brickwork with fly ash brick (old size) built in Cement mortar 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Dismantling wooden framed roof truss exc 10 m but n.exc 15 m complete span complete all as specified and directed.

M&L roof truss (framed) trussed, purlins, crane gantries, rails and fasterning and heavy bracket framing (Beam, tee, angle, M S plates etc including steel primer coat, welding, distnace pieces cleats etc confirming to Fe290 grade E-165 complete all as specified and directed.

S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe290 grade E-165 complete all as specified and directed.

Dismantling timber scantlings 40 Sq. cm and over in section and in any position complete all as specified & directed.

M&L for taking down/demolition of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/Lime conc terracing including screed bed etc. Hessian base felt/tar felt etc. (any type and thickness) complete all as specified and directed .Debries dispose of from the defence land.

Material and labour for applying 10 mm thick plaster in cement mortar 1:4 including integral water proofing compound @ 3% by weight of cement complete all as specified and directed.

Material and labour for water proofing treatment of roof slab as per stages given under item No 24.01 to 24.06. (Note- Each stage passed by GE/ Engin-in -Charge) complete all as specified and directed. .

Preparation of plaster surface roof by brushing and cleaning .

Applying a priming coat with bitumen primer @0.5 Kg/Sqm complete all as specified and directed.

Applying tack coat of hot blown industrial bitumen grade 85/25 @ 1.20 Kg per sqm complete all as specified and directed.

Laying polymeric water proofing membrane weight not less than 3kg/sqm and minimum thickness 3 mm complete all as specified and directed

Applying hot blown industrial bitumen grade 85/25 @ 1.25Kg per sqm complete all as specified and directed.

Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) complete all as specified and directed.

M&L PCC 75 mm thick (1:3:6) type C-1 using 20 mm graded crushed stone aggregate, plinth protection & sub base of chequered tiles etc complete all as specified and directed.

S&F powder coated aluminium three track sliding window (02 glazing & 01 gauze shutter) with frame using standard medium weight jindal sections of weight not less than 0.85 Kg/m including glazing with 5.5 mm thick sheet glass fixed 50 micron thick solar cantrol film and stainless steel wire cloth (1.40 oprature and 0.63mm dia) aluminium snap beadings, 10mm dia deco aluminium anodised grill DG-102 and F or C chennel, fixing grill screws etc, with mesh size 75 mm and aluminium complete all as specified & directed.

S&F powder coated aluminium frame for doors, windows ventilators with one or more rebate including joining cleats, screws, for fixing etc complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weight not less than 0.95 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, incl hinges, door stopper, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weight not less than 0.85 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 5 mm thick figured glass, pinhead not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F solar control film 25 micron reflective type (garewere sun control or equivalent) over 5.5 mm thick sheet glass, ordinary quality and glazing with complete accessories exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/ aluminium frame work and sealing edges of board with PVC beading by chemical adhesive complete all as specified and directed.

S&F aluminium partition of specified aluminium section top rail and middle rail section weight not less than 2.36 Kg/RM, bottom channel section weight not less than 2.59 Kg/RM including aluminium beads rubber gasket and 5mm thick frosted/sheet glass solar control film 25 micron reflective type with in upper portion and 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination complete all as specified and directed.

S & F aluminium (extruded body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws/nails complete all as specified and directed

S&F solid PVC Wall lining/paneling consisting of 5mm thick plain but single side prelaminated PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc 4.00 Sqm each, complete all as specified and directed.

S & F Harrison rails, mild steel, chromium plated including brackets, stops, screw, rollers etc complete all as specified and directed.

Taking up or down 20 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

Taking up or down 15 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F mortice lock, vertical type size 75 mm brass with 4 levers for aluminium shutters complete all as specified and directed.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm) complete all as specified and directed.

S&F 150 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

M & L for brickwork with fly ash brick, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed

Dismantling water tanks and removing to store capacity of water tank exc 500 & n exc 1000 litres complete all as specified and directed.

S & F rotational moulded polyethylene three layer water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres complete all as specified and directed.

S&F in repair Chromium plated, tubular towel Rail, 20mm dia D type, 60 Cm long between flanges complete all as specified and directed.

S&F in repair vitreous China Urinal, Half stall type (size 600 x 340 x 390 mm),white (excluding flushing cistern, flush pipe and waste pipe)

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed

S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410 mm x 330 mm x160 mm complete all as specified and directed

S & F for waste pipe for wash basin and sink (Kitchen), 32/40 mm dia complete all as specified and directed.

S&F in repair Stainless steel toilet paper holder, recessed type complete all as specified and as directed

S & F in repair 15mm bore dia Pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair brass CP mixer (wash basin /wall ) 15 mm bore for mixing hot & cold water screwed down for iron pipe or any type of pipe and fixed in position and making good disturbed portion complete all as specified and directed.

S & F in repair 15 mm chromium plated Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe) complete all as specified and directed.

S & F in repair 15 mm chromium plated Stop valves fancy type (angle valve) cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S & F in repair 20 mm ball brass valves,high pressure (float valve),with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 750 mm complete all as specified and directed.

S & F in repairs grating doom 100/125 mm dia with waste hole/without waste hole of PTMT/ CP. (Minimum weight 40gms) complete all as specified and directed

S & F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in wall/trenches or in floors all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (single T) equale or unequale complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) 'P' trap complete all as specified and directed

S & F in repair 110 mm bore PVC (SWR) 'S' trap complete all as specified and directed

M & L for 110mm dia with cement concrete bed 1:3:6 type C-2, to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed

M & L sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 - 15cm wide with chromium plated bracket guard etc and railing 60cm long complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including jet spray, flush pipe complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, Orrissa pattern with integral foot rest size, 580xmmx440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rests any pattern fixed in repair all as spfd including concrete bedding complete all as specified and directed.

M & L for 20 mm thick granite (of any type/colour) work (table rubbed and polished) in WHB basin slab, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including fixing in wall, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F vitreous china, Ovel type wash hand basin, size 600 x 480 mm white fixed on granite slab, incuding waste pipe, grating etc complete all as specified and directed.

S&F in repairs low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, connection to pipes and handle including connecting pipe, bracket etc of Commander/Hindware/ complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 with wpc, finished fair and even, including necessary scaffolding complete all as specified and directed. Note:- WPC shall be measured and paid separately complete all as specified and directed.

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with wate, including necessary scaffolding etc complete all as specified and directed.

M & L rendering cement plaster 10 mm thick in CM 1:3 on concrete surfaces as in ceiling and finished the surface fair and even without using extra cement complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty on old decorated surface including complete removal of existing treatment complete all as specified and directed

M&L for applying two coats of oil emulsion distemper over a coat of wall care putty of 1 mm thick on new plaster surface complete all as specified and directed

M&L for applying two coats of cement based paint on old decorated surfaces including preparation and necessary scaffolding complete removal of existing treatment complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of cement based primer on new plaster surfaces including preparation, necessary scaffolding complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions complete all as specified and directed.

Supply only integral water proofing compound (Liquid) complete all as specified and directed.

M&L for applying two coats of white/colour washing on old decorated surfaces including preparation and complete removal of existing treatment complete all as specified and directed.

M&L for applying three coats of white/colour washing on new plaster surfaces including preparation, necessary scaffolding complete all as specified and directed.

M&L for applying three coats of white washing on ceiling new plaster surfaces including preparation, necessary scaffolding complete all as specified and directed.

M&L Machine cut kota stone 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over 20mm thick screed bed in cement mortar (1:4) as in floor complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skerting, including 15 mm thick cement mortar and screed bed 1:4 fix in position etc complete all as specified and directed.

S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, tower bolt, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, tower bolt, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone as in bed block and copping, post hole and benching embedding of hold fast & in filling of pressed steel/MS angle door/window frames etc complete all as specified and directed

S&F framed work such as guard bars, grills, hold fast etc and similar work including welding/reveting confirming to Fe-290 Ged E-165 complete all as specified and directed.

M&L for framed work as in doors and gates of angle or other section including welding/reveting, stringers, braces etc complete drilled for fixing of steel sheeting or other coverings to doors etc conforming FE-410-W complete all as specified and directed

S & F 1.25 mm thick mild steel, plain, black sheet in door shutter,steel gates and similar work, cut to size, holes punched; including welding/reveting, round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles complete all as specified and directed.

M&L for 35 mm thick Flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed.

S & F 300mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm mild steel pressed handles, oval type door handle, including welding/reveting etc complete all as specified and directed.

S & F mild steel sliding door bolt 375 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc complete all as specified and directed.

S&F 300 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard rubber, drawn steel spring, fixed in door complete all as specified and directed

Demolition Cement concrete (Reinforced) in Roofs, beams, staircases, landing, chajjas and similar work complete all as specified and directed.

M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded aggregate) lintel of door/window, beams and columns in floors, slabs and in shelves etc complete all as specified and directed.

S & F for TMT bars of 10mm dia and over, dia cut to length bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia (annealed) complete all as specified and directed.

S & F for TMT bars of 5mm dia and over upto 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M & L for flat formwork to lintel beam, soffits, roof beams, lintels, cantilevers, shelves including supports,overhangs,etc complete all as specified and directed.

M & L for two coat of synthetic enamel paint on new steel surface over one coat of red oxide primer complete all as specified and directed .

M & L for preparation & two coat of synthetic enamel paint on new wooden surface over one coat of pink primer complete all as specified and directed

M & L for preparation & two coat of synthetic enamel paint on new steel surfaces over one coat of priming paint, n exc 10cm width or girth complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M & L for excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm including level & removing excavated soil complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets, waste pipe,complete all as specified and directed. Make- Cera, Hindware, Parryware complete all as specified and directed

S & F in repair chromium plated shower rose 125mm dia with Approx 450 mm long 15mm dia steel pipe with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Dismantling wooden framed roof truss not exc 10 m complete span all as specified and directed

M & L for 35 mm factory made shutters (2nd class hard wood) plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L for 35 mm thick 2nd clss hard wood glazed and skeleton shutters incl door spring/stoper, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M & L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

S & F in repair 75 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) junction single (single T) equale or unequale complete all as specified and directed.

M & L for sand filling under floors including Spreading and levelling in floor etc complete all as specified and directed.

S & F mild steel 300 mm, ordinary rat tail rod pattern springs ( helical door spring) including roller and roller plate complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area not exc 400 sqm and depth exc 50mm and not exc 100mm deep including removing not exc 50m and stacking complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance exc 500m and n exc1.50 km depositing where directed.

Rolling and consolidating formation surface of road with 8 to 12 tone power roller incl filling in depression which occur during the process of rolling of formation to required level, gradient, camber and super elevation including necessary watering & filling complete all as specified & directed.

M & L for soling (or sub base) with broken boulders or quarried stone of size 150 mm interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to12 tonne power roller complete all as specified and directed.

M & L for 150 mm thick (compacted thickness) WBM (75+75mm thick in two layer), with coarse aggregates of grading 2 (63 to 40mm size) spread, rolled and consolidated to gradient materials and camber required with 8 to12 tonne power roller complete all as specified and directed.

M & L for 75 mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) spread, rolled and consolidated to gradient materials and camber required with 8 to12 tonne power roller complete all as specified and directed.

M & L for premix bituminous (paving bitumen) macadam laid/rolled with 8 to12 tonne power roller compacted to required camber and gradient and rolled to a uniform smooth surface complete all as specified and directed.

M&L for preparing of water bound macadam surfaced by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt/dust etc and applying evenly a priming/tack coat with bituminous primer of paving bitumen VG-30 grade 80/100 at @ 10 Kg per 10sqm of road surface & providing bituminous premixed carpet 40 mm consolidated thickness with bituminous semidense asphaltic concrete with 5.50% (VG-30 grade) binder content by weight of total mix mixed by hot mixed plant & spreading with mechanical paver & rolled with 8 to 10 tonnes power roller complete to required camber and gradient,complete all as speicified and directed.

Preparing existing black top surface by brushes for removing caked mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and dust etc. and applying evenly a priming/tack coat with bituminous primer (paving bitumen) VG-30 grade@ 5 kg per 10 Sqm of road surface & providing bituminous premixed carpet 30 mm consolidated thickness with bituminous (VG-30 grade) semidense asphaltic concrete with 5.50%(VG-30 grade) binder content by weight of total mix mixed by hot mixed plant & spreading with mechanical paver & rolled with 8 to 10 tonnes power roller complete to required camber and gradient,complete all as speicified and directed.

M & L for painting lines (adequate Nos of coats), dashes, arrows, letters, etc. or roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow complete all as specified and directed

Demolition of cement concrete (unreinforced) in gd floor and paving exc 15 cm thickness below or above the gd level, removing rubbish off the premises complete all as specified and directed.

Removing excavated soils exc 250 M but n exc 500 M and depositing where directed complete all as specified and directed.

M & L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC 75 mm thick (1:4:8) type D-2 using 40 mm graded aggregate sub base of chequered tiles etc complete all as specified and directed.

M & L for chequered cement concrete colour tiles 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying in floors complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness complete all as specified and directed.

M&l for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick surfaces finished even and smooth W/O using extra ement in cm 1:4 complete all as specified and directed

M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in surface channels and drain beds complete all as specified and directed.

m & L for TMT bars of 10mm dia and over, dia cut to length bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia(annealed) complete all as specified and directed . (Note - The payment shall be made only after placing of cover on manholes )

M&L providing precast cover slab RCC 1:2:4 (20 mm graded aggregate) type B-1 for manhole/ drain/ chamber cover window or door cills, lintels, bressumers, steps, chajjas, water troughs, mangers, shelves and similar articles with plain faces ,set in cement mortar 1:6 complete all as specified and directed. Note : Shape of slab directed by Engr-in-Charge.

M & L for 450 mm dia reinforced concrete pipes, class NP3, laid and jointed laid in trenches complete with collars complete all as specified and directed

M & L for 450 mm dia with cement concrete bed 1:4:8 type D-2, to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone as in bed block and copping, post hole and benching embedding of hold fast & back filling of pressed steel door frames etc complete all as specified and directed

Taking down for broken glass copng on top of walls removing rubbish off the premises complete all as specified and directed.

M & L for broken glass coping @ 10 Kg glass/Sqm in CM 1:3, on top of walls complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM 1:4 finished even and smooth without using extra cement. with liquid water proofing compound complete all as specified and directed

All as per above item but on other than fair face of brick work finished even and smooth surface complete all as specified and directed.

M & L for preparation, washing, rubbing down of old decorated plastered or un-plastered surface of wall and applying one coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions complete all as specified and directed.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and Including rigid PVC conduit medium grade, concealed on wall portion and with stove enameled steel conduit medium grade on steel structural truse/ RCC roof ceiling portion surface type fixed with sadlles, screwes as per Engr practices of suitable size but not less than 20 mm bore with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-167 here in before but One socket outlet 5/6 Amps on independent bd controlled by one switch complete all as specified & directed.

All as per item No-167 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No-167 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by 1 one way switch on independent board independent board but below the switch board of light points in same vertical plane complete all as specified and directed

All as per item No-167 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 167 to171 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.

M&L for point wiring concealed type with 1.50 sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, to be terminated in and excluding modular metal GI flush box and its cover plates for fixing modular type switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-176 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the same board with other switches complete all as specified & directed.

All as per item No-176 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

All as per item No-176 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the Ind board with other switches complete all as specified & directed.

All as per item No-176 here in before but point wiring for one six pin socket outlet 15 & 5 amps (independent) controlled by one modular switch using PVC FRLS cable of size 2.5 sqmm complete all as specified & directed. NOTE-For item no 176 to 180 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fixing modular metal GI flush box 1/2 module as per site requirement suitable for 20mm dia conduit with and fixed on walls in CM 1:4 and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

All as above item No -181 but modular metal flush box of 3 module complete all as specified and directed.

All as above item No -181 but modular metal flush box of 4 module complete all as specified and directed.

All as above item No -181 but modular metal flush box of 6 module complete all as specified and directed.

All as above item No -181 but modular metal flush box of 12 module complete all as specified and directed.

Supply and fix modular white cover plate with frame 1 module for mounting modular switches,sockets and regulators etc complete all as specified and directed.

All as per above item No-186 but modular white cover plate with frame 2 module complete all as specified and directed.

All as per above item No-186 but modular white cover plate with frame 3 module complete all as specified and directed.

All as per above item No-186 But modular white cover plate with frame 4/5 module complete all as specified and directed.

All as per above item No-186 But modular white cover plate with frame 6 module complete all as specified and directed.

All as per above item No-186 But modular white cover plate with frame 2x 6 module complete all as specified and directed.

Supply and fix switch modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.

Supply and fix bell push modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.

Supply and fix socket outlet, 6 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply and fix switch modular type, single pole, 16 Amps one module,one way 230 volts complete all as specified and directed.

Supply and fix socket outlet, 6/16 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply & fix rotory stepped type electronic fan regulator modular type,Single module 120 watt 230 Volts complete all as specified & directed.

Supply & fix commiosnig and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed.

S&F for ceiling rose surface bakelite 50 mm x 25 mm size 3 terminals complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified & directed.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed.

S&F LED Batten light fitting of capacity 22 watt surface/wall mounted with specially designed powder coated aluminium housing,high optically efficient polycarbonate diffuser,in built electronic driver duly wired up to terminal block,power consumption<22W,luminaire lumen >2000 lm,system efficiency of >120 lumens/W,LED with LED binning as per ANSI Bin C78.377A,photo biological safety report as per IEC 624718& electrical insulation class 1 Ingress protection IP 20,clor rendering index CRI> 80 ,temp range 0 to 450 C ,driver efficiency >85% Power factor >0.9 THD <20% as per IEC 61000-3-2 ,color temp -6500K,Surge protection 2.5 KV,50000 burning hrs (min) as per L7O criteria,two stages isolated constant current operated driver with range 150-270 V AC and safety extra low voltage safe level< 60 V DC as per IEC standard with LM70 & LM 80 certification complete all as specified and directed.

S&F for 2 ft x 2 ft LED light fitting of capacity 34 watt recess mounted full panel LED luminaire with white powder coted housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired upto terminal block, power consumption< 35 W, luminaire lumen > 3500lm and system efficiency > 120lm/w, CRI> 80, LED with LED binning as per ANSI Bin C78.377A, Photo biological safety report as per IEC624718 & electrical insulation class 1 , colour temp- 5700k, Ingress protection IP20, Driver efficiency > 85% , 50000 burning hours (min) as per L70 criteria, ambient temp 0 to 500C, power factor > 0.95 THD <10%, surge protectionin CM-3KV, two stage isolated constant current operated driver with range 150-270V AC and safety extraa low voltage safe level < 60V DC as per IEC standard, with LM79 & LM80 certification complete all as specified and directed.

S&F LED security light fitting of capacity 40/45 watt with aluminium pressure die cast housing, high purity PC fresneldiffuser with silicon gaskets for IP-65 protection, power consumption < 35 W and system efficiency > 100lm /W, in built electronic driver prewired upto terminal block with driver efficiency > 85% power factor > 0.95, suitable for external pole upto 35mm LED ,CRI > 70, ambient temprature range 0-450c, THD<10%, colour tempreature 5700K, surge protectionin cm 3.5KV 50000burning hour as per L70 criteria, multistage constant current constant voltage operated driver with range 150 -270 V AC and safety extra low volatge safe level < 60V DC as per IEC standard including GI pipe medium grade ISI mark of size 32 mm dia length not less than 1.5 metre bending to shape for fixing light and nuts, bolts, clamp as required to fix to wall all as specified and directed.

S&F Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 15 Watt LED warm white in colour with a nominal system output of 120 lum/watt(min) with PF not less than 0.9 complete all as specified and directed.

S & F in replacement LED light fitting 1x9 W/1X10 W bulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable, power consumption < 10 W and system efficiency > 100lm /W, of suitable size complete all as specified & directed.

Supply & fix NEW GENERATION POST TOP energy saving envirmental friendly long life 35 watt LED luminaire light fitting, IP 65 protection with reflector cover electronic driver, connector block etc with internally prewired fixed to bracket on gate with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified and directed .

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length . Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed.

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 200 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .

S&F MCCB of rating 100 Amp, 4 pole, 415 V, AC fixed type with breaking capacity 25 KA DPX³ 160 type, as per ICE- 60947-2 Ics 100% of Icu, Adjustable tripping: 0 - 0.3 - 1 - 3s with adjustable 70% to 100% and thermal magnetic release to be fixed in existing LT panel for taking In coming electric connection for VTPN DB complete all as specified and directed .

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed.

Supply and fixing in replacement MCB SPN two pole 240 volts, 50 Hz, 10 kA ISI marked as per IS/IEC 60898-1 2002240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Supply & fix in replacement MCB SP, 2 to 4 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. (for light circuit)

Supply & fix in replacement MCB SP, 40 Amps, 'B' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply & fix in replacement MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. (for equipment & power circuit)

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 complete all as specified and directed.

Supply and fix ceiling fan, 1200mm sweep, minimum 220 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor ) type complete with standard accessories i.e (three blade, 02 Nos canopy, electronic socket type fan regulator 90 to 100 W, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed.

S&F iron metal body heavy duty exhaust fan 300mm sweep, double ball bearing, copper wound, with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed.

Supply and fix PVC body fresh air fan of size 200 mm sweep, with PVC louvers, operated at 230 Volts 50 Hz, AC supply, 1350 to 1400 RPM with 3 core flexible copper conductor cable cord of size 0.75 Sqmm from fan to ceiling rose complete all as specified and directed.

Supply and fix electric water heater, of capacity 25 Ltrs vertical storage type, outer body of the heater is made with tough ABS material with special inner tank coating that prevents corrosion and rusting and results in a long tank life energy-efficient and Heating Element upto 2 KW (copper tube)-Spiral Type Multiple safety systems for protection against dry heating, overheating and overpressure, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece (hot & cold of length uoto 450 mm long with to be fixed on wall with fastener mild steel 100 mm long x 10 mm dia with expension type split pin and bolts complete for hanging of geyser all as specified and directed

S & F Wall mounted fan heavy duty 400 mm sweep, 3 speed fan with oscillation and tilt mechanisam, AC single phase, 230 Volts 50 Hz, power consumption 50 W, Air delivery 72 m³/min, fan speed 1350 revolution per minute, 60 ˚ oscillation degree complete all as specified and directed.

M&L for electrically disconnecting and taking down existing ceiling/Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repare/ servicing & painting with one coat of synthetic enable paint and writing of MES/identification No. of fans and re hanging/ re-fixing in original position but including replacement of three cor flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as specified and directed.

Supply laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply & Laying,testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed.

Removal of excavated material n.exc 50 metre away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and directed.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and directed.

Supply and fixing GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washere in roof ,wall, etc complete all as specified and directed.

M & L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Supply and fixing FAPP based polymeric membrane minimum weighing 3 Kg /Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/ sqm) and on primed surface by forced application complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) including integral water proofing compound (3% by weight of cement ) as per manufacturer’s instructions finished even & fair in cutting grooves plinth course etc complete all as specified and directed.

Supply and fixing of two way solar blinking cat eyes (road stud) of size 125 mm x 125 mm x 25 mm ,6 LEDs with stem fixed with chemical as per manufacturer’s instructions complete all as specified and directed.

S & F short rectangular reflective cautionary of height 300 mm of cross section size 75 mm x 100 mm made out of 16 gauge CRCA steel sheet having both side 75 mm X 100 mm cavities for high intensity reflector. Delineator provided with four intensity encapsulated red/ yellow/ white reflector. Delineator provided with four 25 mm x 25 mm x 3 mm x 250 mm (exposed 200 mm) angle iron for fixing. All heat process coated and baked to 1500 degree centgrade to make all weather resistant. Cat part No 11-17 delineater {short) RECT complete all as specified and directed.

M/s Himgiri construction

m/s meetu enterprises

garg construction company

yash enterprises

YAUK ENGINEERS

M/s Singh Engineering Corporation

VEE SONS BUILDERS PVT LTD

SNG BUILDERS AND ENGINEERS

GUPTA ENGINEERING WORKS