17/AR .REG/23-24/EERENO

Amount

Supplying and fixing double door Horizontal TPN MCB Distribution board of 6 way with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incommer 63 Amps TPN MCB and outgoing feeder 6-30 Amps SP MCB 18 Nose

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average Run 9 Mtr.

On Board Plug.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.

Supply and fixing of 1200 mm sweep A.C ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(Orient PSPO Summer King or equivalent)

Supply only heavy duty 1400 rpm 300 mm sweep Exhaust Fan. (Orient Make).

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc , as practicable as possible and providing necessary lenght of PVC insulated wire and making connection of exhaust fan of 30 cm (12")

Fixing only louver shuter/cowl on wall with ncey. Bolts and nuts( 6 mm dia x 62 mm long) for 30 cm (12") Exhaust Fan.

Supplying and fixing 415 V,63 A, TPN MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply only 1.1 KV grade ,XLPE, 4 core 16 sq mm Al, Ar cable. (Make -Gloster,Ploycab,Crystal)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable from 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl removing the rubbish

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials for 4 core 16 sqmm cable.

Supply and fixing of compression type cable gland complete with finishing the end for 4 core 16 sq mm al/A cable.

Supply and fixing 2 x 22 W LED tube light fittings with Lamp. (Philips Cat No- TMC 501 P 2XT-LED 22W P3242)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply only Street light of Philips Make Cat No- BR042PLED25 CW SLES1PSU GR P4210.

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works for 150 mm x 100 mm x 65 mm

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles .25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Laying of 2 x2.5 sq mm + 1x1.5 sq mm cu wire through 19 mm bore polythene pipe conclead in wall asto GS (Comp).

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5sqmm cu wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works .25 mm dia 3 mm thick polythene pipe without earth continuity wire.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes for 10sqmm cu wire.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes for 6 sqmm cu wire.

M. J. ENTERPRISE

SURAJIT ENTERPRISE

MILLENNIUM ENTERPRISE

J.S. ENTERPRISE