Repairing / Renovation of MZU Guest House Inside MZU Campus , Tanhril, Aizawl.

Amount

WASH AREA : Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead: (a) In cement mortar

Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. b) Hard Soil ( pick work ).

Providing and laying cement concrete of specified grade excluding cost of centering and shuttering in - All work upto foundation & plinth level. a) 1:4:8 (1 cement : 4 coarse sand : 8 stone agrregate 20mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a) All work upto foundation & plinth level.

b) All work above plinth level upto floor V level.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Centering and shuttering including strutting, propping, etc. and removal of form works in- a) Foundations, footings, bases of columns etc. for mass concrete.

c) Columns, pillars, piers, abutments, posts and struts.

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

Filling available excavated earth (excluding rock) in trenches, plinth, etc. in layers not exceeding 20 cms in depth, consolidating each layer by ramming and watering and dressing lead upto 50 meters and lift upto 1.50 meters.

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. (b) in cement mortar 1 : 4 ( 1 cement : 4coarse sand )

Coursed masonry with rectangular sized hard stone in foundation upto one storey above and below ground level including curing, etc. complete.

20 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Providing Ist class teak wood dressed in frames of chaukhat for doors, windows, clerestory windows fixed in position.

Providing and fixing 1st class local wood panelled shutters for doors etc. including M.S. butt hinges with necessary screws, etc. complete. a) 40 mm thick.

Providing and fixing brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete. a) 300 x 16 mm

Providing and fixing brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. a) 300 mm

Providing and fixing brass handles with necessary screws, etc. complete. a) 150 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately ). For fixed portion. (a) Natural colour

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Glazing to be paid for separately) (a) Natural colour

Supplying of glass panes at site. c) 4mm thick plate sheet glass.

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, laid on bed of 20mm thick cement mortar 1 : 4 (1cement:4course sand), including the joints with white cement and matching pigments etc.complete.as per design collours. ( c) Double charge

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Coloured polished granite slab of size not less than 1200mm x 600mm x 20mm thick in flooring, treads of steps and landings laid over 20mm (average) thick base of cement mortar 1:4 and jointed with white cement slurry including rubbing and polishing complete. (a) General black

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. (a) Ready mix white primer.

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like Rangoli deluxe emulsion etc.

Finishing walls with exterior emulsion of required shade on new work (three or more coats) to give an even shade. a) Regular exterior emulsion like supercote, walmasta etc.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.

Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats). a) General quality

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. b) Vitreous China Wash basin Compact 450 x 300 mm with single 15 mm C.P. brass pillar taps.

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. b) 75 mm diameter

Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete. (b)20mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc. b) 20mm

Making connection of CPVC pipes distribution branch by providing and fixing equal Tee with jointing, testing complete including cutting and making good etc. (b) 20mm dia nominal bore.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing, testing complete including cutting and making good etc. (b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc. (b) 20mm dia.

Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 . c) Class-I

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. c) Class-I

CONSTRUCTION OF LAUNDRY ROOM : Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colour of 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses. (ii) For 0.50 mm thick :

Providing and laying cement concrete of specified grade excluding cost of centering and shuttering in - All work upto foundation & plinth level. a) 1:4:8 (1 cement : 4 coarse sand : 8 stone agrregate 20mm nominal size)

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. b) 75 mm diameter

Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete. (b)20mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc. b) 20mm

Making connection of CPVC pipes distribution branch by providing and fixing equal Tee with jointing, testing complete including cutting and making good etc. (b) 20mm dia nominal bore.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing, testing complete including cutting and making good etc. (b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc. (b) 20mm dia.

Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 . b) Class-II

Providing and fixing brass bib cock of approved quality. (a) 15mm nominal bore

VIP ROOM I & II : Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete. a) 35mm Readymade White primer Door

20 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Providing and fixing MDF board walling with necessary screws etc. complete. (b) With 17mm thick MDF Board

Providing and fixing M.S. pressed butt hinges bright finished with necessary screws, etc. complete. (b) 150 x 65 x 2.12 mm (Medium type)

Providing and fixing CP Brass Sliding Door Bolts (aldrops) bright finished with nuts and screws etc. complete. (a) 300 x 16 mm

Providing and fixing CP brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. (c ) 150mm

Providing and fixing CP brass handles with necessary screws, etc. complete (c)150 mm

Providing and fixing bright finished CP brass two lever mortise door lock with necessary screws, etc. complete. (a) Union type.

Providing and fixing 150 mm bright finished brass floor door stopper with rubber cushion, screws, etc. to suite shutter thickness complete.

Providing and fixing special quality bright finished brass cupboard or wardrobe lock with four levers including necessary screw etc. complete (best make of approved quality) (a) 40 mm

Providing and fixing M.S. double acting Spring hinges bright finished with necessary screws, etc. complete. (iii) 100mm

Applying priming coat with Top Seal 109hi for waterproofing on roofs etc. , crack bridging etc. on concrete structures .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like Rangoli deluxe emulsion etc.

Providing and fixing vitreous china pedestal type water closet (EWC Studio S-trap Set) with seat and lid, C.P. brass hinges and rubber buffers, 10 litres low level flushing cistern Studio with fittings (Dual Flush), C.I / R.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. i) White

Providing and fixing brass bib cock of approved quality. (a) 15mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 . b) Class-II

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. b) Class-II

Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings. (i) White

SINGLE BED ROOM : Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately ). For fixed portion. (a) Natural colour

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Glazing to be paid for separately) (a) Natural colour

Supplying of glass panes at site. c) 4mm thick plate sheet glass.

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete. a) 35mm Readymade White primer Door

20 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Providing and fixing MDF board walling with necessary screws etc. complete. (b) With 17mm thick MDF Board

Providing and fixing M.S. pressed butt hinges bright finished with necessary screws, etc. complete. (b) 150 x 65 x 2.12 mm (Medium type)

Providing and fixing CP Brass Sliding Door Bolts (aldrops) bright finished with nuts and screws etc. complete. (a) 300 x 16 mm

Providing and fixing CP brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. (c ) 150mm

Providing and fixing CP brass handles with necessary screws, etc. complete (c)150 mm

Providing and fixing 150 mm bright finished brass floor door stopper with rubber cushion, screws, etc. to suite shutter thickness complete.

Providing and fixing special quality bright finished brass cupboard or wardrobe lock with four levers including necessary screw etc. complete (best make of approved quality) (a) 40 mm

Providing and fixing M.S. double acting Spring hinges bright finished with necessary screws, etc. complete. (iii) 100mm

Applying priming coat with Top Seal 109hi for waterproofing on roofs etc. , crack bridging etc. on concrete structures .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like Rangoli deluxe emulsion etc.

Providing and fixing vitreous china pedestal type water closet (EWC Studio S-trap Set) with seat and lid, C.P. brass hinges and rubber buffers, 10 litres low level flushing cistern Studio with fittings (Dual Flush), C.I / R.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. i) White

Providing and fixing brass bib cock of approved quality. (a) 15mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 . b) Class-II

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. b) Class-II

Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings. (i) White

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (b) Matt/Antiscratch

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

DOUBLE BED ROOM : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete. a) 35mm Readymade White primer Door

20 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Providing and fixing MDF board walling with necessary screws etc. complete. (b) With 17mm thick MDF Board

Providing and fixing M.S. pressed butt hinges bright finished with necessary screws, etc. complete. (b) 150 x 65 x 2.12 mm (Medium type)

Providing and fixing CP Brass Sliding Door Bolts (aldrops) bright finished with nuts and screws etc. complete. (a) 300 x 16 mm

Providing and fixing CP brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. (c ) 150mm

Providing and fixing CP brass handles with necessary screws, etc. complete (c)150 mm

Providing and fixing 150 mm bright finished brass floor door stopper with rubber cushion, screws, etc. to suite shutter thickness complete.

Providing and fixing special quality bright finished brass cupboard or wardrobe lock with four levers including necessary screw etc. complete (best make of approved quality) (a) 40 mm

Providing and fixing M.S. double acting Spring hinges bright finished with necessary screws, etc. complete. (iii) 100mm

Applying priming coat with Top Seal 109hi for waterproofing on roofs etc. , crack bridging etc. on concrete structures .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like Rangoli deluxe emulsion etc.

Providing and fixing vitreous china pedestal type water closet (EWC Studio S-trap Set) with seat and lid, C.P. brass hinges and rubber buffers, 10 litres low level flushing cistern Studio with fittings (Dual Flush), C.I / R.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. i) White

Providing and fixing brass bib cock of approved quality. (a) 15mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 . b) Class-II

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. b) Class-II

Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings. (i) White

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (b) Matt/Antiscratch

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

EXISTING TOILET BLOCK : Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm

Providing Ist class teak wood dressed in frames of chaukhat for doors, windows, clerestory windows fixed in position.

Providing and fixing 1st class local wood panelled shutters for doors etc. including M.S. butt hinges with necessary screws, etc. complete. a) 40 mm thick.

20 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand)

Applying priming coat with Top Seal 109hi for waterproofing on roofs etc. , crack bridging etc. on concrete structures .

Providing and fixing brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete. a) 300 x 16 mm

Providing and fixing brass tower bolts (socket bolts) bright finished with necessary screws etc. complete. a) 300 mm

Providing and fixing brass handles with necessary screws, etc. complete. a) 150 mm

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (a) Gloss finish

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.

Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats). a) General quality

Providing and fixing uPVC multi floor trap with floor trap grating including jointing with rubber lubricant/ solvent cement complete.

Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge..

Providing and fixing solid plastic Seat Cover and lid for pedestal type W.C. pan with C.P. brass hinges, rubber buffers, etc. complete.

CONFERENCE HALL : Providing & fixing External wall cladding with decorative high pressure laminated sheet of approved quality and make (Greenlam or equivalent) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). (b) 8 mm thick

Providing and fixing perforated acoustical panel (Ceiling & Wall) of approved quality including fixing to frames with screws etc. complete. (Installation in wood batten system or steel keel system Frame work to be paid separately).

Vanlalsanga

MIZOTECH

Lalramsanga

Malsawmtluanga