Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹29.5 L+₹60,650 (2.10%)Rejected-Finance 763 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UTTAR PRADESH | 284401 | L2 | Rejected-Finance Not being a
lowest
tenderer | |
| 3 | L3₹29.6 L+₹71,351 (2.47%)Rejected-Finance 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L3 | Rejected-Finance Not being a
lowest
tenderer | |
| 4 | L4₹31.7 L+₹2.7 L (9.40%)Rejected-Finance | L4 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA
MAINT/ REPAIR CERTAIN B/R WORKS IN OLD CAMP AREA AT BABINA CANTT UNDER GE BABINA
2022_MES_531678_1
GE/BAB/TOKEN/13 OF 2022-2023
Open Tender
Civil Works
Item Rate
184 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹68,000
Yes
27 Jul 2022
17 Jun 2022
21 Jul 2022
17 Jun 2022
19 Jul 2022
1 Jul 2022
60 days
Amount
Demolition of Brickwork or stone/ boulder masonry, laid dry, stacking the serviceable stone and disposal of debris and rubbish complete all as directed.
M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.
Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) laid in alternate panel , panel formed of glass strip ( Size of each panel shall not exceed 12 Sqm ) as in floor , surfaces finished even and smooth using extra cement complete all as specified and as directed. Note : Glass strips shall be paid as supply only.
Supply only Glass dividing strips , 3 mm thick and 38 mm wide and as directed
M&L for hard core of gauge n exc 63 mm graded ,spread ,watered and compacted etc complete and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) but exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed.
S&F 35 mm thick, flush shutter , FACTORY MADE solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F, FACTORY MADE 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
S&F, Pressed steel frames for doors(125x60) mm using 1.25 mm thick mild sttel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:3:6 Type C-1 using 20 mm graded stone aggregates and 1 No 10 mm dia deformed bar etc complete all as specified and directed . Note : The cost of PCC ,bottem bar 10 mm dia , hinges ( 6 Nos ) deemed to be included in unit rate quoted by the tenderer.
S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed by EIC .
S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed.
S&F aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed.
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.
S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm for PVC doors etc complete all as specified and as directed.
S & F Butt hinges 100 mm size, medium weight, cold rolled mild steeletc complete all as specified and as directed.
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F in repair floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140 mm long complete all as specified and as directed.
S&F in repair steel window with side hung shutters including box type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed.
S&F in repair steel window with side hung shutters including box type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed.
S&F in repair steel ventilator with side hung shutter FACTORY fabricated including hinges steel peg stay, complete including taking down old existing steel ventilator and as directed.
M&L for Anodised aluminium frame for doors / windows using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.
M&L for Anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5.5 mm thick ordinary sheet glass duly covered with tinted solar control film 25 micron sticked to glass panels , including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as aluminium butt hinges (B-21) 100 mm size - 3Nos , Aluminium disc type handles - 2 Nos , Aluminium tower bolts size 200 mm long- 2 Nos , Mortice Lock 4 livers Brass size 100 mm - 1No with duplicate keys ( Make; Link/Godrej/Horrison ) shall be provided in each door etc complete all as specified and directed. Note (i) The cost of all fittings ,Glass with sun control film , PVC sheet , aluminium glazing clips , rubber packings , jointing cleats and glazing clips etc shall deemed to be included in the unit rate quoted by the tenderer . (ii) Dividing line for the purpose of providing and measuring the PVC sheet and glass shall be exact centre of shutter
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including providing 5.5 mm thick ordinary sheet tinted glass etc complete all as specified and directed Note: (i) The cost of glass , aluminium glazing clips , rubber packings , jointing cleats and glazing clips etc shall deemed to be included in the unit rate quoted by the tenderer .
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as aluminium peg stays 150mm long -1 no. , Aluminium butt hinges type B-21 100mm long-2 Nos , Aluminium D type handle-1 No and 5.5 mm thick sheet tinted glass as directed etc complete all as specified. Note (i) The cost of all fittings ,tinted sheet Glass , aluminium glazing clips , rubber packings , jointing cleats and glazing clips etc shall deemed to be included in the unit rate quoted by the tenderer
S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and as directed.
Supply fabrication and fixing mild steel work Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete and as directed Make : As specified in tender documents
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane including hacking out broken glass in any type of shutter etc complete all as specified and directed..
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing arragement in wooden/ steel shutter complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing arragement in wooden/ steel shutter complete all as specified and directed.
Supply and Fixing in Repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
M&L for double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of aluminium, other parts made of mild steel, heavy duty and fixed in floor including cutting of floor for fixing of machine and make good in affected area complete all specified and directed
S&F in repair stainless steel curtain rod grading H-304, 25mm dia as in curtain rod etc complete and as directed.
Supply and Fixing Stainless steel round knob at both end of curtain rod of 25mm dia etc complete and all as specified and directed.
S&F stainless steel bracket suitable for curtain rod of 25 mm dia and fixed in position on walls with wooden cleat/ rawal plug as directed.
Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed.
M&L for glazed ceramic coloured tiles 300x200x 6 to7mm thick for work on vertical surface such as skirting over 10 mm thick rendering in CM 1:4 , set & jointed in cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L, coloured glazed ( Dark) ceramic tile 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor 15 mm thick screed bed or bedding layer in CM 1:6 , set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L, coloured glazed ceramic ( Dark) tile 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting /dado over 10 mm thick rendering in CM 1:4 etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed
M&L for Vitrified ceramic coloured tiles of size 600x600 mm x 8-9 mm thick DARK ( Premium Quality ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 etc complete all as specied and directed.
M&L for Vitrified ceramic coloured tiles of size 600x600 mm x 8-9 mm thick DARK ( Premium Quality ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:3 etc complete all as specied and directed.
M&L for 20mm thick Granite stone slab, Z Black ( SOUTH BLACK ) , machine cut , well polished in single piece laid/ bedded in 15 mm thick screed bed in CM 1:6 as in cooking plaforms , vertical surfaces & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over and including 15mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M &L for chequered tiles (Cement) 20cm X 20cm x 25mm set and jointed and pointed in neat cement slurry in floor with GREY CEMENT AND NO PIGMENT over & including 15mm thick screed bed in CM (1:6) Complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of shape as approved and size confirming to IS-15658-2006 , M-35 grdae , of 60 mm thickness with GREY CEMENT & NO PIGMENT laid on 50 mm thick sand coushioning . Note : Cost of sand deemed to be included in the unit rate quoted by the tenderer.
M&L for 75 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panels made of 10 mm thick plywood ( Size of each panel shall not exceed 12 Sqm ) and finish the surface even and smooth without using extra cement including filling of joint with bitumen mastic ( 1 part bitumen mixed with 3 part dry sand) etc complete all as specified and as directed. Note : Cost of form work for forming joints and jointing materials deemed to be included in unit rate quoted by the tenderer.
Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and directed.
M& L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished smooth and even without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick on other than fair faces of wall /conc surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M & L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer etc complete all as specified and directed.
S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm etc complete
S&F stainless steel kitchen rack plate rack over all size 1200 mmx120mm made out of 1.00 mm thick stainless steel sheet etc complete all as specified and as directed.
Taking down steel tubing and connection incl cleaning for refixing or removal to store 15mm bore complete all as specified and directed.
Taking down steel tubing and connection incl cleaning for refixing or removal to store 20mm bore complete all as specified and directed.
Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fittings such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fittings such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.
S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.
S&F in repair 20mm Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair Stop valve CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs 15mm bore angle cock cast copper alloy copper alloy , CP , concealed with wall flange , one way , screwed down high pressure with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
S&F in repairs 15mm bore FANCY type chromium plated bib cock with AERATOR , long body,Fancy type with wall flange etc complete all as specified and as directed
S&F in repairs 15mm bore FANCY type chromium plated bib cock with AERATOR , long body,Fancy type with wall flange etc complete all as specified and as directed
S&F in repair Bib taps standard of PTMT 15mm Bore screwed down for high pressure, screwed for Iron Pipe and fixed, complete all as specified and as directed.
S&F in repair Bib taps standard of PTMT 20mm Bore screwed down for high pressure, screwed for Iron Pipe and fixed, complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe with 32 mm bore suitable for wash hand basin and kitchen sink complete all as specified and directed.
S&F in repair swivel shower of CP any colour for fixing with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of any colour complete all as specified and directed.
S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed
S&F in repairs Vitreous chine wash down water closet pan(padestal pattern), white(EWC) including plastic seat of same colour of WC, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and direcetd.
S&F in repair Vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed.
S&F vitreous china wash hand basin, white flat back, size 550mmx400mm incl CI bracket and 32mm dia brass CP waste coupling and including fixing of tap ,waste fitting and union complete all as specified and as directed . Note: Mixer shall be measured seperately under respective items
S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F in repair 15mm bore cast copper alloy chromium plated fancy type wall mixer with telephonic shower arrangement with pipe bend (three in one) etc complete all as specified and as directed .
S&F wash hand basin Mixer ( Mixing of Hot & Cold water ) , cast copper alloy, CP , Fancy type Swan neck with long shank suitable for WHB etc complete and as directed
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair 15 mm bore Pillar tap, Fancy Type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair PVC bathroom cabinet with mirror of size 432mm x 311mm complete all as specified and as directed .
Supply and fixing in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed.
S/F brass chromium plated health faucet ( ABC chromium plated ) with 8 mm dia ,1 Mtr long flexible tube with wall hook for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed.
S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets.
S & F in repair false ceiling with 9-9.5 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed .
Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and as directed
Dismentling timber scantling of size 40sqcm and above in any position fixed by any means as directed.
M&L 2nd class hard wood in scantlings , clean sawn timber fixed in position and as directed.
Dismantling CGI/AC (corugated or semi corrugated) and Galvalume sheet in roofing with ridge as directed .
S&F 6mm thick NON asbestos cement (corrugated or semi corrugated ) sheet as directed in roofs fixed with L type or J type hook bolts etc complete all as specified and directed .
S&F asbestos cement one piece plain angular ridge 6mm thick and as directed .
S&F, pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws /J hook complete all as specified and as directed.
S & F 0.8 mm thick Galvanized, corrugated mid steel sheeting, Class 3, having 275gm/sqm zinc caoting with two corrugation side lap, fixed with L or J type hook bolts with washers in roofs, wall etc .
S&F in repair 2 mm thick fibre glass reinforced translucent corrugated sheeting fixed with two corrugation side lap and end lap Min 200 mm fixed with J type hook complete and as directed .
S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.
M&L for applying two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
M & L for applying two coat of synthetic enamel paint over one coat of red oxide on steel surfaces, surfaces of any description over 10cm width or girth not other wise described complete all as specified and as directed.
S&F 18 mm thick Celuka ply of grade 1 quality both side plain white colour fixed with screws ,solvent cement /adhesive to make cabinet sides , top and bottom and including forming shelves inside the cabinet incl taking out old unserviceable boards etc complete as directed. Make : M/s Rajshri Celuka Or equivalent make approved by the GE
S&F 18 mm thick Celuka ply of grade 1 quality one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adhesive to make cabinet sides , top and bottom and including forming shelves inside the cabinet incl taking out old unserviceable boards etc complete as directed. Make : M/s Rajshri Celuka Or equivalent make approved by the GE
S&F 12 mm thick Celuka ply of grade 1 quality both side plain white colour fixed with screws ,solvent cement /adhesive to make cabinet back sides , pull put shelves inside the cabinet incl taking out old unserviceable boards etc complete as directed. Make : M/s Rajshri Celuka Or equivalent make approved by the GE
S&F auto closing hinges 35 mm of O crank ( KH-001) openable at 110 degree for kitchen shutters etc complete all as specified and as directed. Make : KAFF or equivalent approved by the GE
S&F stainless steel handle 100 mm size suitable for kitchen cabnet shutter etc complete all as specified and as directed
Ms Vinay constructions
M/S M S Constructions
M/S DEVANSH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .