Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.0 Cr
EMD Value
₹10.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of CHC Building at Loisingha under National Health Mission in the Bolangir district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/007
NBCC/ODISHA/ZO/NHM/NIT/22-23/007
Open Tender-Domestic
Civil Works General
Balangir, Odisha
₹11,800
₹10.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
10 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
2 1 Diluting and injecting chemical emulsion (to be 0 0.00 0.00 0.00
supplied free of cost at site of work) for PRE
CONSTRUCTIONAL Anti-termite treatment and creating
a continuous chemical barrier under and all-round the
column pits, wall trenches, basement excavation, top
perimeter of building, expansion joints, over the top
surface of consolidated earth on which apron is to be
laid, surroundings of pipes and conduits etc. complete
as per specifications (plinth area of the building at
ground floor only shall be measured for payment).
4 2 Earth work in excavation of foundation trenches in 0 0.00 0.00 0.00
hard soil including dressing of sides and levelling the
bed up to the required depth and depositing the
excavated materials away from the work site within
50m initial lead & 1.5m initial lift. complete as directed
6 3 Supplying & filling of foundation with course sand well 0 0.00 0.00 0.00
watered and rammed including cost, cost of all labour,
carriage, royalty complete in all respect.
9 4 Cement Concrete (1:3:6) using 40mm size hard 0 0.00 0.00 0.00
granite C.B. metal approved quality from approved
quarry including cost, carriage, royalty, cost of all
labour. etc complete and as directed by E.I.C.
11 5 Cement Concrete (1:2:4) using 12mm size hard 0 0.00 0.00 0.00
granite C.B. chips approved quality from approved
quarry including cost, carriage, royalty, cost of all
labour. etc complete and as directed by E.I.C.
13 6 R.C.C. M-25 grade with 20mm and down grade C.B. 0 0.00 0.00 0.00
chips of approved quality from approved quarry
including hoisting, laying hire charges of concrete
mixture, vibrator, watering, curing and cost of all
materials and labour, centering shuttering etc
complete but excluding cost of reinforcement.
14 0 COLUMN BASE FOOTING 0 0.00 0.00 0.00
16 0 COLUMN SUPER STRUCTURE 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
41 7 Straightening, cutting, bending bent up or coiled rods, 0 0.00 0.00 0.00
including cranking, hooking, welding or jointing the
M.S. rods or tor confirming to I.S. 432 (Plain) and
1785 (Tor) steel and binding, tying the grills, hoisting,
lowering and placing in proper position required for
R.C.C. works including cost, conveyance and taxes of
M.S. rods or tor steel and binding wires of 18 to 20
gauge and cost of all labour etc.complete in all respect.
45 8 Brick work with Flyash Bricks 23cm x 11cm x 8cm size 0 0.00 0.00 0.00
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±2 percent in cement mortar
(1:6) in Foundation and Plinth including watering
curing, cost of carriage, royalty and taxes of all
materials, cost of all labour, etc complete as per the
direction of E.I.C.
47 9 Brick work with Flyash Bricks 23cm x 11cm x 8cm size 0 0.00 0.00 0.00
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±2 percent in cement mortar
(1:6) in Super Structure including watering curing,
cost of carriage, royalty and taxes of all materials, cost
of all labour, etc complete as per the direction of E.I.C.
51 10 Brick work with Fly Ash. Bricks in cement mortar (1:4) 0 0.00 0.00 0.00
in Super Structure having crushing strength not less
than 75.00 kg/cm2 immerging the bricks in water not
less than six hours before use in masonary.
54 11 12mm thick C.P.(1:6) on brick masonary to the 0 0.00 0.00 0.00
smooth surface including watering, curing, cost,
carriage, royalty of all materials, cost of all labour, etc
complete as per the direction of E.I.C.
58 12 16mm thick C.P. (1:6) over brick masonary to the 0 0.00 0.00 0.00
smooth surface including watering, curing cost,
carriage, royalty, and taxes of all materials, cost of all
labour, etc complete as per the direction of E.I.C.
62 13 6 mm thick cement plaster (1:4) to RCC surfaces 0 0.00 0.00 0.00
finished smooth including closed deep chiping and slury
66 14 Supplying, fitting and fixing Vitrified tile in floors of 0 0.00 0.00 0.00
approved make conformaing to IS:13755 laid on 20
mm thick cement mortar (1:4) and filling joints with
white cement of approved quality including cost of all
materials, etc. required for the work all complete as
per direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
69 15 Supplying, fitting & fixing of Vitrified Industrial floor 0 0.00 0.00 0.00
tiles of premium grade having thickness 8mm to 10mm
confirming to IS 4457 of size 30cm x 30cm in floors of
approved make laid on 20 mm thick cement mortar
(1:4) (1 cement : 4 course sand) and filling joints with
slurry including cost of all materials, labour T&P etc
required for the work all complete as per direction of
the Engineer-in-charge
71 16 Fixing Vitrified tiles in dados skirting and risers of 0 0.00 0.00 0.00
steps on 12mm thick CP (1:3) jointed with neat
cement slurry mixed with pigments to match the shade
of the tiles including cost, carriage, cost of all labour
74 17 Supplying, fitting & fixing of 30cm x 20cm/20cm x 0 0.00 0.00 0.00
20cm special plain/printed series Ceramic wall tiles of
premium grade having thickness 6.5mm to 6.7mm
confirming to IS 13753 in dadoes, skirting and risers
of steps laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry mixed with
pigment to match the shades of the tiles etc. complete
including cost of all materials, labour T&P etc. required
for the work all complete as per direction of the
Engineer-in-charge
77 18 Providing and fixing 20mm thick Granite stone flooring 0 0.00 0.00 0.00
(sample of Granite stone should be approved by EIC)
for stair case trade, riser and similar locations where
ever required in horizontal/vertical surfaces of required
size of approved shade, colour and texture, with
moulding edge & Grooving etc. laid over 20mm thick
bed of cement mortar 1:4 (1 cement: 4 coarse sand)
with joints treated with white cement mixed with
matching pigment, epoxy touch ups including rubbing,
curing, moulding and polishing to give high gloss finish
etc. complete as per direction of Engineer-in-charge.
In all floors and all heights.
80 19 Finishing surface of walls with cement based wall putty 0 0.00 0.00 0.00
(water based) of approved make and finished smooth
and even surface to receive painting including cost of
scaffolding staging charges with cost of all materials
labour T & P etc. as per direction of Engineer -In -
84 20 Priming 1 coat with wall primer water bond cement 0 0.00 0.00 0.00
primer including all labour, materials etc. complete.
90 21 Wall painting 2 coats with plastic emulsion paint of 0 0.00 0.00 0.00
approved shade on new work to give an even shade
including cost of paint etc complete.
94 22 Wall painting two coat with any approved weather coat 0 0.00 0.00 0.00
paint including cost of all materials, labour and T&P
require for the work etc. complete as directed by the
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
98 23 Supplying of M.S. Door, Window with grills, Grills made 0 0.00 0.00 0.00
out of M.S. Angle frame, M.S. Flat, Sheet etc of
approved section & design, electrically welded properly
with all necessary locking arrengement, and 1 coat red
oxide primer including cost of all materials, labour
charges, carriage of materials to site etc. complete.
102 24 Supplying, fitting and fixing of stainless steel of 304 0 0.00 0.00 0.00
grade in hand railing using 50 mm dia of 2 mm thick
circular pipe with Balustrade of size 32 mm x 32mm x
2mm @ 0.90 mtr C/C and stainless aquare pipe
bracing of size case as per approved design and
specification, buffing, polishing etc. with the cost,
conveyance taxses of all material, cost of all labour etc.
complete in all respect.
105 25 Supplying and fitting-fixing of Un-plasticised Poly Vinyl 0 0.00 0.00 0.00
Chloride (UPVC) Casement Door – 60- Series duly
manufactured using UPVC reinforced profiles of 60 mm
x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm
x 2.25 mm for casement Door Sash Profile and 74 mm
x 60 mm x 2.5mm mullion profile capable of mounting
single glazing system, structurally reinforced with hot
dip galvanised up to 50 microns of minimum thickness
of 2.0 mm prefabricated & welded through fusion
welding the door sash shall be fitted with 12mm thick
WPC Board of Greenply make duly fixed with EPDM
weathering seal resistant accessories like clipping
locking system made of aluminium 1 No., per set of
sashes and the system is to be installed at the site
using anchor fasteners, silicon rubber sealant, easy
glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour
charges, materials and product conforming to ASTM D
638-14,EN-477-95 and other applicable codes and
108 26 Supplying and fitting-fixing of Un-plasticised Poly Vinyl 0 0.00 0.00 0.00
Chloride(UPVC) Three Track - Three Panel sliding
window– 60- Series duly manufactured using UPVC
reinforced profiles of 108mm x 45 mm x 2.5 mm for
outer frames and Window Sash of 39 mm x 58 mm x
2.5 mm capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to 50
microns of minimum thickness of 1.5 mm prefabricated
& welded through fusion welding the window frame
shall be fitted with 6 mm thick clear toughened glass of
SAINT-GOBAIN make duly fixed with EPDM weathering
seal resistant and the system is to be installed using
Reinforced Large Coupler at the site using anchor
fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance of
all materials, accessories, labour charges, materials
and product conforming to ASTM D 638-14,EN-477-95
and other applicable codes and standards.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
112 27 Supplying and fitting-fixing of Un-plasticised Poly Vinyl 0 0.00 0.00 0.00
Chloride(UPVC)Casement window with top fixed – 60-
Series duly manufactured using UPVC reinforced
profiles of 60mm x 55 mm x 2.5 mm for outer
frames.75 mm x 60 mm x 2.25 mm for casement
window sash profile and 74 mm x 60 mm x 2.5 mm
mulion profile capable of mounting single glazing
system, structurally reinforced with hot dip galvanised
up to 50 microns of minimum thickness of 1.5 mm
prefabricated & welded through fusion welding the
window frame shall be fitted with 6 mm thick clear
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant accessories like
clipping locking system made of aluminium 1 no per
set of sashes and the system is to be installed at the
site using anchor fasteners, silicon rubber sealant,
easy glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour
charges, materials and product conforming to ASTM D
638-14,EN-477-95 and other applicable codes and
113 0 standards. GROUND FLOOR Sqm 12.60 8951.48 1,12,788.65
115 28 Supplying and fitting-fixing of Un-plasticised Poly Vinyl 0 0.00 0.00 0.00
Chloride (UPVC) Ventilator/ Top Hung – 60- Series duly
manufactured using UPVC reinforced profiles of 60 mm
x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x
2.25 mm for casement Window Sash Profile capable of
mounting single glazing system, structurally reinforced
with hot dip galvanised up to 50 microns of minimum
thickness of 1.5 mm prefabricated & welded through
fusion welding the window sash shall be fitted with 6
mm thick clear toughened glass of SAINT-GOBAIN
make duly fixed with EPDM weathering seal resistant
accessories like clipping locking system made of
aluminium 1 No., per set of sashes and the system is
to be installed at the site using anchor fasteners,
silicon rubber sealant, easy glazing/ deglazing at site
etc., including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
applicable codes and standards.-
118 29 Priming one coat with any approved primmer (To 0 0.00 0.00 0.00
Receive Enamel paint) including cost of primmer &
labour to give an even shade excluding cost of primer.
122 30 Painting two coats with approved enamel paints of 0 0.00 0.00 0.00
approved colour, shade over a coat of primer including
sand papering, polishing the surface, cost,
conveyances of all materials and cost of all labour etc,
complete as per specification & direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
126 31 Providing & fixing chemical & sweepers, making dry the 0 0.00 0.00 0.00
surface with electric hot bower, grinding the surface
and clearing the dust particles mechanically, applying
micro cement concrete at brick work side up to 75mm
thick x 75mm height & other side Horizontal expansion
joint with 75mm x 75mm size micro concrete strips,
repairing other surface using cement concrete of Prop
(1:3) as required inserting & placing 60mm dia backer
rod in position, applying Sika primer 80 to the
prepared surface by brush & fixing combined (200mm
x 2mm) with recommended adhesive Sikadue 31C
manually, after completion of the process testing by
flooring water on it. After confirmation covering the
length by aluminium sheet (300mm x 1.3mm) by
means PVC plug & SS Screw and washer the horizontal
expansion joint treatment with Sikadur Combiflex
system including cost of labour T&P wire and remaining
charge of all necessary machines etc complete as per
the direction of Engineer-in-charge.Sikadur Combiflex
x (200mmx2mm)+ Aluminium Sheet (300mm
129 32 Providing and fixing 300mm wide AL Strip 1.3mm thick 0 0.00 0.00 0.00
by stainless steel screw over a layer of Hypolene
flexible strip(Sikadur combiflex) of 200mm width &
2mm thick fixed by rasin based adeshive sikadur 31c
the Vertical Expansion Joint including cost of all
materials, labours, all taxes ect. complete as directed
by Engineer-in-charge.Sikadue
Combiflex(200mmx2mm)_Aluminium Sheet
(300mmX1.3mm)/ Rmt.
132 33 Supplying fitting & fixing of 35mm thick flush door 0 0.00 0.00 0.00
shutters with flush door block board 'A' premium
35mm thick both side teak (Green ply / Allwin) both
side laminated with 4 mm thick veener board (Teak
Heritage) (Archid ply/ Green ply ) by using adhesives,
with all labour, iron fitting & wooden hinged cleats etc.
fitted & fixed complete in all respect, including cost of
iron fitting , alluminum fittings, all labours, T&P etc. as
per specification approved by the Department & as per
direction of the E.I.C. SE no 284 dt 27.02.12 for Chief
134 34 25mm thick CC 1:2:2 with 6mm size CB chips for 0 0.00 0.00 0.00
grading concret over roof slab etc. complete.
136 35 Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
Pidifin 2K including conveyance of all materials to
worksite, payment of royalty, taxes etc all complete as
per specification and direction of the Engineer in
138 36 Construction of embankment with approved material 0 0.00 0.00 0.00
obtained from borrow pits with all lifts and leads,
transporting to site, spreading, grading to required
slope and compacting to meet requirement of table
140 37 Construction of cement concrete kerb with top and 0 0.00 0.00 0.00
bottom width 115 and 165 mm respectively, 250 mm
high in M 20 grade PCC on M-10 grade foundation 150
mm thick, foundation having 50 mm projection beyond
kerb stone, kerb stone laid with kerb laying machine.
142 38 Construction of Granular Sub-base by providing 0 0.00 0.00 0.00
coarsed graded materials,spreading in uniform layer by
mortar grader on prepared surface mixing by mix in
place method with rotavator at OMC and compacting
with vibratory roller to achieve the density, complete
as per Clause - 401.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
144 39 Supplying , fitting, fixing Paver Block 80mm thickness 0 0.00 0.00 0.00
rubber mould tiles in floors of approved make
conforming ti IS : 13755 laid on 20mm thick sand of
approved quality including cost of all labour T&P etc.
required for the work all complete as per direction of
E.I.C (For New work only)
147 0 Sub-Total of Civil Works 0 0.00 0.00 7,97,06,527.04
148 0 Plumbing Works 0 0.00 0.00 0.00
149 40 GPH Works: Supplying all materials, labour, T&P and 0 0.00 0.00 0.00
providing and fixing to wall or ceiling and floor pvc
pipes confirming to ASTM-D- 1785/89 (Sch-80) and
pipe fittings of the following nominal borewith clamps
including making good the wall, ceiling and floor,
testing all complete as per specification and direction
of the Engineer-in-charge.
162 41 supplying all materials, labour, T&P and cutting holes 0 0.00 0.00 0.00
through existing brick work including making good the
damages in cement mortar (1:4) for taking G.I. Pipes
and fittings/ P.V.C. pipes and fittings etc. all complete
as per P.H. specification and direction of Engineer-in-
163 0 Ground Floor :- 250 mm thick wall Each 35.00 62.54 2,188.90
164 0 First Floor :- 250 mm thick wall Each 23.00 62.54 1,438.42
165 42 Supplying all materials, labour, T&P and cutting hole in 0 0.00 0.00 0.00
R.C.C floors, roofs, etc upto 19 cm thick for passing
G.I. Pipes / P.V.C pipes and fittings etc and repairing
the holes after insertion of pipes etc with cement
concrete (1:2:4 ) including finishing complete so as to
make it leak proof as per direction of the Engineer-in-
166 0 Ground Floor :- 250 mm thick wall Each 35.00 189.15 6,620.39
167 0 First Floor :- 250 mm thick wall Each 23.00 189.15 4,350.54
168 43 Supplying all materials, labour, T&P and cutting 0 0.00 0.00 0.00
grooves in pucca floors and walls for taking G.I./P.V.C.
pipes and making good the damages as per direction
171 0 Supplying all materials, labour T&P and fitting and 0 0.00 0.00 0.00
fixing brass/CP fittings of the following nominal bore
with supply of all joiniting materials complete as per
specification and direction of the Engineer-in-charge.
172 44 Supplying all materials, labour, T&P and fixing Each 58.00 1209.97 70,178.38
standard sized two way Bib cock of of approved
make etc complete including cutting the wall and
making good the damages, including cost of all
materials complete as per PH specification complete as
per direction of Er-in-charge. 15mm dia CP Two way
bib cock with Flange FLR-5053N.
173 45 Supplying all materials, labour, T&P and fixing Each 14.00 4142.74 57,998.42
standard sized Bib cock of of approved make etc
complete including cutting the wall and making good
the damages, including cost of all materials complete
as per PH specification complete as per direction of Er-
in-charge.15mm dia. nominal bore Long body Bib Cock
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
175 46 Supplying all materials, labour, T&P and fixing Each 136.00 1209.97 1,64,556.19
standard sized 15mm dia angular Stop cock of of
approved make etc complete including cutting the wall
and making good the damages, including cost of all
materials complete as per PH specification complete as
per direction of Er-in-charge. 15mm dia CP angle stop
cock with wall flange FLR-5053N
176 47 Supplying all materials, labour, T&P and fixing Each 72.00 1471.22 1,05,928.13
standard sized pillar cock of of approved make etc
complete including cutting the wall and making good
the damages, including cost of all materials complete
as per PH specification and direction of Engineering-in-
charge. 15mm dia brass pillar cock Continental Cat.
No.- -Jaquar FLR - 5011N
177 48 Fixing of 25mm dia Brass / Gun meta ball Valve Each 16.00 960.52 15,368.32
confirming to IS : 781-1995 of approved make as per
specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
178 49 Fixing of 32mm dia Brass / Gun meta ball Valve Each 16.00 1207.38 19,318.02
confirming to IS : 781-1995 of approved make as per
specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
179 50 Fixing of 40mm dia Brass / Gun meta ball Valve Each 14.00 1563.62 21,890.65
confirming to IS : 781-1995 of of approved make as
per specification complete as per direction of Er-in-
charge.40mm dia brass or gun metal full way valve
180 0 15mm dia PVC connection pipe 450 mm long Each 136.00 118.00 16,048.00
181 0 15mm dia CP Extention Nipple Each 136.00 47.67 6,483.39
182 51 Providing and fixing circular type stainless steel jalli Each 70.00 92.16 6,451.06
(grating) with hole for floor /nahani trap etc complete
as per specification and direction of the Engineer in
183 52 Supplying all materials, labour, T&P and fixing Health 0 0.00 0.00 0.00
Faucet of complete with Chromium plated brass
brackets fixed to wooden plugs with Chromium plated
brass screws as per specification and direction of the
Engineer-In-Charge.
184 0 15mm dia CP Health Faucet of Jaquar 1.2mtr long, Each 58.00 2239.40 1,29,885.43
8MM dia ALD-577.
185 53 Supplying all materials, labour, T&P and fitting and 0 0.00 0.00 0.00
fixing U-PVC SWR soil waste ventilating pipes and
fittings of the following outside diameter conforming to
ISI No 13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including jointing
with supply of approved rubber lubricant by non-heat
application method/as per manufacturer's specification,
testing, earthwork in excavation in all kinds of soil and
refilling of trenches as per specification and direction of
the Engineer-In-Charge.
187 0 110mm diameter U-PVC SWR pipes Mtr 450.00 670.36 3,01,661.10
190 0 110mm U-PVC door bend Each 58.00 155.41 9,013.55
191 0 110mm U-PVC plain shoe bend Each 58.00 220.07 12,764.06
192 0 110mm U-PVC vent cowl Each 58.00 45.31 2,628.10
194 0 110mm U-PVC plain bend Each 58.00 85.31 4,948.21
195 0 100mm S/S coupling with EPMD Each 50.00 431.05 21,552.70
196 54 Supplying all materials,labour T&P and cutting holels 0 0.00 0.00 0.00
through existing brick or laterite masonry wall for
taking H.C.I pipes and fittings including making good
the damages etc. all complete as per P.H.Specification
and direction of the Engineer-In-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
198 55 Supplying all materials, labour T&P and and fixing 0 0.00 0.00 0.00
12.50 liters/10 liters capacity low level flushing cistern
of with a pair of cast iron or M.S. brackets complete
with fittings such as siphonic arrangements 15mm
nominal size brass/pvc ball valve with polythene float
CP brass handle,unions and couplings for connection
with inlet, outlet and overflow pipes, 32mm dia CP long
flush bend, 15mm dia pvc inlet connection pipe
including cutting holes and making good the same and
connecting the flush bend with cistern and closet and
connceting the inlet pipe with suupply main etc all
complete as per the specification and direction of the
Engineer-in-charge.
199 0 10 Liters capacity PVC cistern with 32mm dia flush Each 58.00 1894.49 1,09,880.42
bend. sleek fresh single flush Starwhite, Size 47.6 X
0 0 Supplying all materials, labour, T&P and fixing vitreous 0 0.00 0.00 0.00
china water closet, squatting pan (Indian type W.C
pan/Orissa pattern squatting pan) of
Hindware/Jaquar/Parryware duly embedded in cement
concrete (1:4:8) using 4cm size hard granite metal
including fixing a pair of vitreous china 250mm x
130mm x30mm footrest, fixing 100mm dia HCI 'p' or
's' trap (with/without 50mm dia horn) for water colset
squatting pan including jointing the trap with pan in
cement mortar (1:1) cutting the floor and mending
good the damages etc all complete as per specification
and direction of the Engineer-In-Charge.
0 0 Pan cat no 20004 Starwhite. Size- 53x41 cm Each 12.00 3021.04 36,252.43
200 56 Supplying all materials, labour, T&P and fixing the 0 0.00 0.00 0.00
following vitreous china Wash Down Water Closet (Wall
hung European type W.C. pan) of with integral 'p' or
's' trap to the floor with wooden plug and chromium
plated pedestal screws including jointing the trap with
soil pipe in cement mortar (1:1) fixing plastic seat and
cover for wash down water closet with chromium
plated brass hinges and rubber buffers including
polishing etc all complete as per specification and
direction of the Engineer-In-Charge.
201 0 Wall hung EWC with 'p' / S trap plain FLS-WHT- Each 30.00 12796.04 3,83,881.14
5351/5201 (S-10) Starwhite type, size-370x650x765
202 57 Supplying all materials, labour, T&P and fixing the 0 0.00 0.00 0.00
following vitreous china Wash Down Water Closet
(European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's' trap
to the floor with wooden plug and chromium plated
pedestal screws including jointing the trap with soil
pipe in cement mortar (1:1) fixing plastic seat and
cover for wash down water closet with chromium
plated brass hinges and rubber buffers including
polishing etc all complete as per specification and
direction of the Engineer-In-Charge.
203 0 Hindware slick cat no-20011 (S-28.5/P-18) Starwhite Each 16.00 5573.38 89,174.02
EWC SLICK size-52x36x39 cm
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
204 58 Supplying all materials, labour T&P and fixing wash 0 0.00 0.00 0.00
basins of Hindware/Jaquar/Parryware with hole for
pillar taps with cast iron or M.S.brackets painted white
including cutting holes in walls and making good the
damages with supply of wooden plugs, screws and
cement etc, fixing pedestal for wash basin recessed at
the back for the reception of pipes and fittings, fixing
PVC waste pipe of 32mm nominal diameter for wash
basin including brass check nut complete, fixing pillar
taps capstan head screw down high pressure lettered
'Hot' and 'Cold' with long screws, shanks and back nuts
of 15mm dia nominal bore, fixing 15mm dia PVC inlet
connection pipe and making connection with pillar
cocks and supply mains for wash basin, fixing 32mm
dia CP brass waste, etc all complete as per
specification and direction of the Engineer-In-Charge.
205 0 wall hung Wash Basin Size - 565mmx440x210mm, Each 58.00 6810.61 3,95,015.15
Cat -no- FLS-WHT-5801/5301Starwhite.
206 59 Countersunk Wash Basin 0 0.00 0.00 0.00
207 0 Supplying all materials, labour T&P and fixing counter Each 14.00 8071.55 1,13,001.76
sunk Wash Basin Size - 545mmx545x180mm, Cat.No.
FLS-WHT-29601 with all fittings as per direction of the
engineer-in -charge.
208 60 Supplying all materials, labour, T&P and fixing Flat Each 18.00 7444.15 1,33,994.66
back large pattern urinal of the following sizes
including connecting the urinal with 32mm dia pvc
waste pipe 910mm long by means of white lead mixed
with chopped hemp, fixing 32mm dia CP dome waste,
15mm dia CP spreader including cutting holes in walls
land making good the damages with supply of wooden
plugs, screws and cement etc all complete as per
specification and direction of the Engineer in charge.
Flat back large urinal cat no-60002 starwhite, Size-
209 61 Supply and fixing all materials, labour, T & P and Each 18.00 1586.04 28,548.68
providing urinal partition with italian collection
(pastel)- size- 75x16.5x36.5 cm Cat no-61005 etc all
complete as per direction of the Engineer-In-Charge.
210 62 Supplying all materials, labour, T&P and fixing mirror of 0 0.00 0.00 0.00
superior glass mounted on 6mm thick A.C.sheet or
plywood sheet and fixed to wooden plugs with CP
screws and washers complete as per specification and
direction of the Engineer-in-charge.
211 0 750mmx600mm size B.E.mirror (Alpina/Golden Sqm 32.40 2069.96 67,066.57
212 63 Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
standard size glass-shelf of
Hindware/Jaquar/Parryware with CP brass brackets
and guard rails complete fixed to wooden plugs with CP
screws as per specification and direction of the
Engineer-in-charge.
213 0 Jaquar glass shelf ACN-1171 N 600mm long Each 72.00 1808.70 1,30,226.69
214 64 Supplying all materials,labour, T&P and fixing standard 0 0.00 0.00 0.00
sized CP towel rail 24" of complete with CP brass
brackets fixed to wooden plugs with CP screws as per
specification and direction of the Engineer-In-Charge
215 0 25mmx600mm long CP towel rail ACN-1111NM. Each 58.00 1749.23 1,01,455.46
216 65 Supplying all materials, labour, T&P and fixing Each 14.00 1453.72 20,352.02
standard sized Chromium Plated brass towel ring
complete with Chromium Plated brass brackets fixed
to wooden plugs with Chromium Plated brass screws
as per specification and direction of the Engineer in
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
217 66 Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
standard sized Chromium Plated soap case of
complete with Chromium Plated brass brackets fixed
to wooden plugs with Chromium Plated brass screws
as per specification and direction of the Engineer in
218 0 CP soap holder ACN-1131N. Each 58.00 903.17 52,383.98
219 67 Supplying all materials, labour, T&P and fixing Nos 58.00 978.57 56,757.29
standard sized Robe Hook of complete with all as
per specification and direction of the Engineer in
charge. Robe hook AGA-BIV-31791
220 68 Supplying all materials, labour, T&P and fixing Nos 58.00 2054.38 1,19,154.04
standard sized Soap Dispensor of complete with all
as per specification and direction of the Engineer in
charge. Soap dispense with Glass Bottle. CAN-1135N.
221 69 Providing and fixing Salem Stainless steel A ISI (18/8) Nos 4.00 4467.48 17,869.92
kitchen sink as per IS : 13983 with C.I. Brackets and
stainless steel plug 40 mm including painting of fittings
and brackets, cutting and making good the walls
wherever required. a) Kitchen Sink with drain board
Nirali make size 510 X 1040 mm bowl depth 178 mm.
222 70 Supplying & fixing of Matrix Set-1 Mat code- Nos 2.00 83647.37 1,67,294.74
70002,EWC : (P-18) (WB 46X36 with one pair
mounting brackets, EWC & cistern complete with
fittings & seat cover, one no hinged rail 76 cm and 4
nos of grab rail 60cm complete with all as per
specification & direction of the Engineer in charge.
223 71 Supply all materials, labour, T&P and providing fitting & Nos 2.00 102660.00 2,05,320.00
fixing (Aqua guard) pure Chill 80 PSS UV of size
750x570x1350 mm height with water storage capacity
120 liters along with 2 nos of fancets 1 for cold water
and 1 for normal water including a flow of 1.5 ltr per
minute etc. all complete as per approved drawing,
specification and direction of the EIC.
224 72 Supplying all materials, labour, T&P and fixing 100 Nos 14.00 2936.19 41,106.72
mm dia wall mounted over head shower & Shower
arm including cutting the wall and making good the
damages, including cost of all materials complete as
per PH specification and direction of Engineer-in-
charge. 100 mm dia CP overhead shower with Arm
225 73 Supplying all materials, labour, T&P and fixing Each 14.00 3039.33 42,550.56
standard sized 15mm dia Single lever Concealed
Deusch mixer with provision for connection to
overhead shower only of of approved make etc
complete including cutting the wall and making good
the damages, including cost of all materials complete
as per PH specification complete as per direction of Er-
in-charge. Concealed stop cock FLR-5227.
226 74 Fixing Rotational moulded Poly Propelene double layer 0 0.00 0.00 0.00
cylindrical vertical water storage tanks confirming to IS
12701-1996 including cutting holes through the tank
and fixing mild steel tubes and fitting and providing
extra sockets and jam nuts, fixing ball valve
etc,including hosting upto a height of 5 mtr above
ground level and placing the tank to the required
postion etc all complete as per specification and
direction of the Er-in-charge.
227 0 2000 ltr capacity Double layer cylindrical vertical Each 15.00 26276.07 3,94,141.08
water storage tanks
228 75 Supplying all materials, labour, T&P and providing anti- 0 0.00 0.00 0.00
skid ceramic tiles in floors, treads and landing on
20mm thick bed of cement mortar 1:4 (1 cement:4
sand) joined with neat cement slurry mixed with
pigment to match the shades of the tiles including
rubbing and non-polishing complete as per direction of
the Engineer in charge. ( pre-approved by the
Engineer in charge)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
231 76 Supplying all materials, labour, T&P and fixing provide 0 0.00 0.00 0.00
glazed tiles in dados skirting on 12mm thick cement
plaster (1:3) jointed with neat cement slurry mixed
with pigments to match the shades of the tiles
including rubbing and polishing complete as per
direction of the Engineer in charge. tile 600x300cm
size to be pre-approved by the Engineer in charge)
234 77 Supplying of filling sand in foundation and over areas 0 0.00 0.00 0.00
including watering, ramming, consolidating and
dressing, labours, tools, taxes etc. all complete as per
the specification and direction of E.I.C.
236 78 Providing and laying plain cement concrete 1:3:6 (1 0 0.00 0.00 0.00
cement:3 sand: 6 stone agregate 40mm nominal size)
as levelling course in foundation and plinth etc.
including tempering, curring, shuttering etc. complete
all depth and height.
238 79 Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
cement concrete (1:2:4) with 12mm size hard granite
chips including watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes etc all
complete as per specification and direction of the
Engineer in charge
240 80 Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
Pidifin 2K including conveyance of all materials to
worksite, payment of royalty, taxes etc all complete as
per specification and direction of the Engineer in
243 81 Supplying fitting & fixing of 35mm thick flush door 0 0.00 0.00 0.00
shutters with flush door block board 'A' premium
35mm thick both side teak (Green ply / Allwin) both
side laminated with 4 mm thick veener board (Teak
Heritage) (Archid ply/ Green ply ) by using adhesives,
with all labour, iron fitting & wooden hinged cleats etc.
fitted & fixed complete in all respect, including cost of
iron fitting , alluminum fittings, all labours, T&P etc. as
per specification approved by the Department & as per
direction of the E.I.C. SE no 284 dt 27.02.12 for Chief
246 82 Supplying all materials, labour, T & P and constructing 0 0.00 0.00 0.00
Gully trap chamber of the following inside size with 8
cm thick R.C.C. precast cover slab in CC (1:2:4) mix
using 12mm size h.g. chips, foundation concrete
(1:4:8) using 40mm size h.g. metal on bed aound trap
, Fly Ash brickwork in CM (1:6) in P&F and inside
12mm thick cement plastering (1:3) finished with a
floating coat of neat cement including fixing 100mm
x100mm size gully trap, 150mm x150mm C.I gratig
etc. all complete as per aproved drawing, specification
and direction of Engineer-in-charge.
247 0 250mmx250mm with RCC cover Each 13.00 1427.21 18,553.73
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
248 83 Supplying all materials, labour, T & P and constructing 0 0.00 0.00 0.00
Inspection chamber of the following inside size with CC
(1:3:6) mix using 40mm size h.g. metal on bed, Ist
class Fly Ash brickwork in CM (1:6) , moulding and
shaping the channel inside and benching with CC
(1:2:4) using 12mm size h.g. chips, 12mm thick
cement plastering (1:3) finished with punning to inside
, cement flush pointing (1:3) to outside , R.C.C. cover
slab in (1:2:4) using 12mm size h.g. chips with RCC
man hole cover , earth work in excavation in all kinds
of soil and refilling the cavity around the chamber
including watering ,curing, conveyance of all materials
to worksite , payment of royality , taxes etc. all
complete as per aproved drawing , specification and
direction of Engineer-in-charge.
250 84 Supplying all materials, labour, T&P and laying in 0 0.00 0.00 0.00
trenches (to level or slope) unplasticized PVC pipes
conforming to IS: 4985/2000 of the following outside
dia for class-3(0.60mpa) including jointing with supply
of approved solvent cement by non-heat application
method/as per manufacturer’s specification, providing
and laying in trench cement concrete (1:4:8) with
40mm size hard granite metal in the Type C-1
standard bedding surrounding or encasing including
concrete for bedding and curing etc all complete as per
PH specification and direction of the Engineer-in-
251 0 110mm dia u-pvc pipe alround concrete mtr 180.00 1301.66 2,34,298.44
252 0 160mm dia u-pvc pipe alround concrete mtr 180.00 2157.63 3,88,373.40
253 85 Supplying all materials, labour, T&P and constructing 0 0.00 0.00 0.00
Man hole chamber of the following size with cement
concrete (1:3:6) using 40 mm size HG metal on bed ,
!st class Fly Ash Brick work in CM (1:6) moulding and
shaping the channel inside and benching with CC
(1:2:4) mix using 12 mm size H.G chips, 12 mm thick
cement plaster (1:3) with punning to inside, cement
flush pointing (1:3) to outside ,RCC cover slab in
(1:2:4) mix using 12 mm size H.G chips with RCC man
hole cover , earth work in all kinds of soil and refilling
the cavity around the camber including watering,
curing, conveyance of all materials to worksite
payment of royalty, taxes etc. all completed as per
approved drawing, specification and direction of
Engineer-in-charge.
254 0 Inside size 900mmx900mmx900mm each 10.00 18826.19 1,88,261.92
255 0 addl depth of 0.30m upto 4.50m depth each 5.00 2051.08 10,255.38
256 86 Supplying all materials, labour, T&P and constructing 0 0.00 0.00 0.00
soakway pit of the following size with precast RCC
rings joined loose, gravel backing in the rear of well
steining, precast RCC cover slab in cement concrete
(1:2:4) using 12mm size hg chips fitted with iron lifting
handles including cutting hole in the rings for inlet
pipe,earthwork in open well excavation in all kinds of
soil and refilling of cavity around the pit & painting the
iron works, watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes etc all
complete as per approved specification and direction of
the Engineer-In-Charge
257 0 RCC rings soakway pit 1.8m dia x 2.6m deep each 2.00 22804.68 45,609.36
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
258 87 Labour for drilling a perfectly vertical bore hole of 0 0.00 0.00 0.00
specified dia for a specified depth below ground level
through consolidated and unconsolidated rock with
down the hole hammer drilling rig or combination rig
as required to suit the site condition as per the
direction of the Engineer in charge including use of
own rig with its accessories, tools and plant and
consumables etc for lowering of 200mm/150mm dia
G.I/P.V.C/M.S casing pipes for housing fitted with
socket and with or without well screen as per the
necessity for soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to prevent
collapse of overburden is to be provided by the
contractor including lowering and withdrawing after
completion of the tube well), 200mm dia to 400mm dia
in overburden portion including packing of gravel
supplied by the contractor for 400mm dia bore only
259 0 Drilling of 200mm dia bore 0 0.00 0.00 0.00
262 0 Drilling of 150mm dia bore 0 0.00 0.00 0.00
264 88 Lowering the following size of G.I/P.V.C/M.S housing 0 0.00 0.00 0.00
pipes with or without slotted pipes as per the necessity
from ground level up to 45.00m depth and fitted and
fixed up in perfectly vertical position including cutting
and threading of pipes and slotted pipes and supplying
and fixing all jointing materials, tools and plant etc all
complete and keeping the top of casing pipe threaded
including plugging tube wells to prevent entry of
foreign materials.
265 0 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
268 89 Supplying polyvinyl chloride pipes as per ASTM-D-1785- 0 0.00 0.00 0.00
89 having threads in accordance with DIN 2999 part-
1/DIN-42225 part-II specification length of pipe (laying
length) will be 3 mtrs. The pipes shall be supplied with
both external and threaded with free socket. The pipe
having external thread at one end i.e female and or
belled end. The female end having internal thread is to
be belled in order to accept the male end while jointing
pipes with a bore threading shall be provided with a
greave at the roof of the male thread accomodate
flexible PVC/Rubber 'O' ring to make the joint water
tight colour of the pipe shall be blue. The name of the
manufacture along with batch No class of pipe shall be
stranded legibly of each pipe length.
270 90 Supplying all materials, labour, T&P and providing and Each 1.00 931.96 931.96
providing sanitary sealing by cement concrete grouting
of annular space around GI/PVC/MS housing pipe upto
5m below ground level (as per drawing) to plug the
bore hole excluding cost of cement all complete as per
direction of the Engineer in charge. Minimum one
metre of casing pipe to be inserted in the bore into the
rock at the bottom to ensure sanitary sealing
(excluding cost of cement which will be supplied
directly by the department)
271 91 Cleaning and developing the tube well with supply of 0 0.00 0.00 0.00
compressor worked till clear and adequate discharge is
obtained from the tube well including supply and use of
all necessary equipment and labour as per direction of
the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
273 92 Supplying all materials, labour, T&P and providing, 0 0.00 0.00 0.00
fitting and fixing submersible pump with squirrel cage
induction type submersible type submersible electric
motor to run on 3 phase/1 phase line voltage ranging
from 320 volt to 450 volt conforming to IS: 8034/89
with following specifications with suitable control panel,
jointing with GI/PVC/HDPE pipes, electrification,
testing, commissioning, trial running, conveyance of all
materials to worksite, payment of taxes etc all
complete as per specification and direction of the
Engineer in charge
274 0 1 H.P. Single phase/ three phase 3 stage head Each 2.00 19749.90 39,499.79
renge of 20 to 35 mtr with discharge capasity 145 to
110 L.P.M With outlet dia 25 mm (keeping 100%
275 0 DOL Control panel Each 1.00 4490.49 4,490.49
276 0 40mm dia steel short piece Each 1.00 179.71 179.71
278 0 50mm size CI bracket Pair 1.00 107.73 107.73
280 0 20mm dia rigid UPVC pipes Mtr 35.00 8.14 284.97
281 0 Steel rope with cover Mtr 35.00 31.51 1,102.71
282 0 Labour charges for lowering including transportation Each 1.00 2360.00 2,360.00
283 93 Supplying all materials, labour, T&P and providing and 0 0.00 0.00 0.00
fixing to wall or ceiling and floor HDPE pipes and pipe
fittings conforming to IS: 4984/2000 (10kgf/sqcm) of
the following nominal bore with clamps and jointing by
Fusion welding method including testing, making good
the wall, ceiling and floor all complete as per
specification and direction of the Engineer in charge
285 94 Earthwork in excavation in all types of soil for site 0 0.00 0.00 0.00
leveling, foundation, pits, trenches and other civil
works up to and including 1.5 metre lift and stacking
the soil upto a lead of 100 metre and including
dewatering, removing slush, shoring and strutting (as
required), complete as per specification and as
directed by the Engineer-In-Charge.
287 95 Filling at all depth with available excavated earth 0 0.00 0.00 0.00
(excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 15 cm in
depth : consolidating each deposited layer by ramming
and watering complete (lead upto 100m) as directed
by the Engineer-In-charge.
289 96 Supplying of filling sand in foundation and over areas 0 0.00 0.00 0.00
including watering, ramming, consolidating and
dressing, labours, tools, taxes etc. all complete as per
the specification and direction of E.I.C.
291 97 Providing and laying plain cement concrete 1:3:6 (1 0 0.00 0.00 0.00
cement:3 sand: 6 stone agregate 40mm nominal size)
as levelling course in foundation and plinth etc.
including tempering, curring, shuttering etc. complete
all depth and height.
293 98 Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
cement concrete (1:2:4) with 12m size hard broken
granite chips including watering, curing, conveyance of
all materials to worksite, payment of royalty, taxes etc
all complete as per specification and direction of the
Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
295 99 Providing, lifting, hoisting and laying Reinforced 0 0.00 0.00 0.00
cement concrete of M-250 grade as per approved
designs and drawings having a minimum compressive
strength (in work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20 mm. size
black hard crushed broken granite stone chips and
screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25 % ) to
be mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering, laying and
compaction concrete by using vibrators, watering and
curing for 28 days, centering and shuttering then after
dismantling and removing debris from the work site
and finishing the exposed surface smooth providing
grooves or beads wherever necessary including cost,
conveyance, loading, unloading, royalties and taxes of
all materials and cost of all labours, sundries, T & P
required of the work etc. complete in all respect as
directed by the Engineer-in-Charge. But excluding cost
and conveyance of M.S. rods or Tor steel and binding
wires and labour charges for straightening, cutting,
bending etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
300 100 Supplying, straightening, cutting, bending, placing in 0 0.00 0.00 0.00
position and binding reinforcement steel work in
RCC/reinforced brick works as per drawing and
specification including preparation of respective bar
bending schedule and binding (Binding wire to be used
as per the IS code) etc. all complete as per direction of
Engineer-In-Charge.Cold Twisted bars, Thermo-
Mechanically-treated bars.
302 101 First class Fly Ash Brick masonry using F.A. bricks of 0 0.00 0.00 0.00
size 25 cm. x 12 cm. x 8 cm. having crushing strength
not less than 75 kg. Per. Sqr. Cm. in cement mortar of
mix( 1:6) with ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after immersing
the bricks for 6 (Six) hours in water before use in
Foundation & Plinth including splays cutting, circular
moulding, corbelling, chamfering and similar such type
of works, watering and curing etc. including cost,
conveyance, loading, unloading, royalties and taxes of
all materials, cost of all labour, scaffolding, sundries,
T&P required for the works etc. complete in all respect
as directed by the Engineer-in-Charge.
304 102 12mm cement plaster on internal smooth side of 0 0.00 0.00 0.00
RCC/brick surfaces with cement mortar of mix 1:4 (1
cement : 4 fine sand) including neat cement punning &
necessary scaffolding, curing etc. all complete at all
floors and all heights.
306 103 Providing 16mm. thick cement plaster in all floors at all 0 0.00 0.00 0.00
height with cement mortar of mix (1:6) with OPC 53
grade cement finished smooth to inside smooth surface
of brick masonry walls after racking out the joints
including watering and curing, rounding of corners etc.
complete with cost, coveyance, loading and unloading,
royalties and taxes of all materials and cost of all
labours, sundries, T&P and scaffolding required for the
work etc. complete in all respect as desired by the
Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
308 104 Supplying all materials, labour, T&P and providing , 0 0.00 0.00 0.00
fitting & fixing 100mm x100mm x100 mm SW Tee in
wall including filling the recess with cement concrete
(1:3:6) with 12mm size h.g chips all complete
including watering, curing, conveyance of all materials
to worksite, payment of royalty all complete as per
specification and direction of the Engineer in charge
310 105 Supplying all materials ,labour, T&P and making MS 0 0.00 0.00 0.00
STEP IRON IN 20MM diameter MS steel bars & fixing
into walls of man hole/septic tank duly embedded in
cement concrete (1:3:6) complete as per specification
and direction of the Engineer in charge.
313 0 Sub-Total of Plumbing Works 0 0.00 0.00 78,26,448.77
314 0 Electrical Works 0 0.00 0.00 0.00
315 106 Recessed wiring to light point / first light of group 0 0.00 0.00 0.00
control/ call bell point/ exhaust fan point /wall fan point
with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor of ISI marked in 20 mm
dia non-metalic PVC conduit with 6 Amp, 250 V clip in
type switch ISI marked and ceiling rose ISI marked
mounted on G.I modular box with face plate & cover of
suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire
including all accesories and connection as per direction
of Engineer in Charge.
317 107 Recessed wiring to secondary light point looped from Nos. 150.00 467.28 70,092.00
primary light point with 1.5sqmm FR PVC insulated
single core multistrand copper conductor of ISI marked
with 20mm dia non-metallic PVC conduit with
1.5sqmm FR PVC insulated single core multistrand
copper conductor for running earth including 3 plate
ISI marked Ceiling rose with all accessories &
connection as per direction of Engineer-in-charge.
Average Length: 3 mtr
318 108 Recessed wiring to ceiling fan point with 1.5sqmm FR Nos. 129.00 1672.06 2,15,695.74
PVC insulated single core multistrand copper conductor
of ISI marked with 20mm dia non-metallic PVC
conduit with 6Amp 250V Modular Switch,Stepped type
Moudular Regulator, Base & Cover with 1.5sqmm FR
PVC insulated single core multistrand copper conductor
for running earth including all accessories & connection
as per direction of Engineer in charge. Group B
319 109 Recessed wiring to Twin control light point with 1.5 Nos. 10.00 1725.16 17,251.60
sq.mm FR PVC insulated single core multistrand copper
conductor of ISI marked in 20 mm dia non-metalic PVC
conduit with 6Amp, 250 V clip in type 2way switch ISI
marked and ceiling rose ISI marked mounted on G.I
modular box with face plate & cover of suitable size ,
with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire including
all accesories and connection as per direction of
Engineer-in-charge. Group C
320 110 Recessed wiring for 5 / 6 amp socket outlet with Nos. 145.00 591.18 85,721.10
6Amp, 250 V clip in type modular switch ISI marked
mounted on G.I moular box with face plate & cover of
suitable size including all accesories and connection on
same switch board as per direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
321 111 Recessed wiring for 5 / 6 amp socket outlet with 2 x Nos. 10.00 1384.14 13,841.40
1.5 sq.mm FR PVC insulated single core multistrand
copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6Amp, 250 V clip in type
switch ISI marked mounted on G.I moular box with
face plate & cover of suitable size , with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor
as earth wire including all accesories and connection on
separate board as per direction of Engineer-in-charge.
322 112 Recessed wiring for 2 x 6 amp socket outlet Nos. 100.00 1096.22 1,09,622.00
controlled by 2 nos 6Amp, 250 V clip in type switch
ISI marked mounted on single G.I moular box with
face plate & cover of suitable size including all
accesories and connection on separate board as per
direction of Engineer-in-charge.
323 113 Recessed wiring for 6 pin 16 amp socket outlet with Nos. 45.00 929.84 41,842.80
16Amp, 250 V clip in type switch ISI marked mounted
on G.I moular box with face plate & cover of suitable
size including all accesories and connection as per
direction of Engineer-in-charge. 25Nos for Stage
Light,3Nos For Aquaguard.
324 114 Recessed wiring for A.C/ Power socket outlet with Nos. 30.00 1137.52 34,125.60
industrial type socket outlet, plug top and metal
chained cover in sheet steel enclosure ,20A/32A SP
MCB including all accesories and connection as per
direction of Engineer-in-charge.
325 115 Recessed wiring to exhaust fan/Wall Fan point with Nos. 55.00 1209.50 66,522.50
1.5sqmm FR PVC insulated single core multistrand
copper conductor of ISI marked with 20mm dia non-
metallic PVC conduit with 6Amp 250V Modular Switch,
Base & Cover with 1.5sqmm FR PVC insulated single
core multistrand copper conductor for running earth
including all accessories & connection as per direction
of Engineer in charge. Group B
327 117 Recessed wiring for 3 x 6 amp socket outlet Nos. 2.00 1248.44 2,496.88
controlled by 2 nos 6Amp, 250 V clip in type switch
ISI marked mounted on single G.I moular box with
face plate & cover of suitable size including all
accesories and connection on separate board as per
direction of Engineer-in-charge.
328 118 Recessed wiring to submain in 4 x 16 sq.mm FR PVC Mtrs 150.00 808.30 1,21,245.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 50 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 2 x 10 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
329 119 Recessed wiring to submain in 4 x 10 sq.mm FR PVC Mtrs 150.00 534.54 80,181.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 40 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 2 x 6 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
330 120 Recessed wiring to submain in 4 x 6 sq.mm FR PVC Mtrs 0.00 0.00 0.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 32 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 2 x 4 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
331 121 Recessed wiring to submain in 2 x 6 sq.mm FR PVC Mtrs 500.00 238.36 1,19,180.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 25 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 1 x 4 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
332 122 Recessed wiring to submain in 2 x 4 sq.mm FR PVC Mtrs 650.00 198.24 1,28,856.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 20 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 1 x 2.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
333 123 Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC Mtrs 2500.00 178.18 4,45,450.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 20 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 1 x 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
334 124 Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC Mtrs 300.00 161.66 48,498.00
insulated single core multistrand copper conductor of
ISI marked confirming to IS-694/1990 in 20 mm dia
non-metalic heavy duty PVC conduit 1.6 mm thick
along with 1 x 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire as equired.
335 125 Supply and fixing of following way three pole and 0 0.00 0.00 0.00
neutral, sheet steel, MCB distribution, 415 V on
surface / recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, hinged front acrylic
cover for the MCB knobs detachable gland plate,
interconnections, phosphatized and powder painted
including earthing etc. as required wih necessary MCB
, RCCB / ISOLATORS as required.Note for MCB- There
should be colour indication for tripping On ,Off &
Trip/There should be mid trip position for toggles for
electrical fault conditions.
336 0 Supply, fixing, erecting, connecting and commissioning Nos. 8.00 16950.70 1,35,605.60
of indoor type dust and vermin proof, sheet steel clad
ready made, double door horizontal type powder
coated wall mounted 6 way TPN Distribution Boards
For PDB suitable for 440 V, three phase, 4 wire 50 Hz
AC Supply complete with bottom detachable plate for
interconnections etc as below.Incommer 1 No-63A FP
MCB (10KA) Outgoings-16/20A SP MCB 10KA-18Nos.
337 0 Supply, fixing, erecting, connecting and commissioning Nos. 8.00 13935.80 1,11,486.40
of indoor type dust and vermin proof, sheet steel clad
ready made, double door horizontal type powder
coated wall mounted 4 way TPN Distribution Boards
For LDB suitable for 440 V, three phase, 4 wire 50 Hz
AC Supply complete with bottom detachable plate for
interconnections etc as below.Incommer 1 No-40A 4P
MCB (10KA) Outgoings-6 A SP MCB 10KA- 12 Nos,
338 0 Supply, fixing, erecting, connecting and commissioning Nos. 2.00 27725.28 55,450.56
of indoor type dust and vermin proof, sheet steel clad
ready made, double door Vretical type powder coated
wall mounted 4 way VTPN Distribution Boards For
FLDB suitable for 440 V, three phase, 4 wire 50 Hz AC
Supply complete with bottom detachable plate for
interconnections etc as below.Incommer 1 No-63A 4P
MCB (10KA) Outgoings-40 A TP MCB 10KA- 4 Nos,
339 0 Supply, fixing, erecting, connecting and commissioning Nos. 2.00 35201.76 70,403.52
of indoor type dust and vermin proof, sheet steel clad
ready made, double door Vretical type powder coated
wall mounted 4 way VTPN Distribution Boards For
FPDB suitable for 440 V, three phase, 4 wire 50 Hz AC
Supply complete with bottom detachable plate for
interconnections etc as below.Incommer 1 No-100A
4P MCCB (25KA) Outgoings-63 A TP MCB 10KA- 4
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
340 126 Supply, installation,testing & commissioning of floor 0 0.00 0.00 0.00
mounting front operated front access extensible type
cubicle panel totally enclosed, dust and vermin proof
with IP-42 /55 protection with hinged and lockabale
doors.CRCA sheets including interconnections,tinned
copper crimping lugs, bonding to earth and painting
suitable for use at 415 V, 3phase 4 wire 50 Hz system,
and to withstand a fault level of 35 KA symmetrical for
1 sec at 415 V complete as per specifications, as
required and as below : All switchboards shall have
provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded and
all equipment shall be finger touch proof. The bus bars
shall be insulated with heat shrinkable
sleeves.SMC/DMC shrouds and busbar supports shall
be used with Indication lamp, C.T , Digital Voltmeter,
Digital Ammeter and control fuse etc. complete.
341 0 MAIN PANEL with 400A 4P Change over Switch ,400A set 1.00 442802.08 4,42,802.08
4P MCCB 50KA -1 No as incomer, 100A 4P MCCB 16KA-
4Nos,200A 4P MCCB 36KA-2Nos & 200 A 4P Change
over switch-1Nos,80A 4P MCB 10KA- 4Nos, 63 A 4P
MCB 10KA -5Nos, with E.C Busbars with 4nos 65KA
VSD along with 4nos 32A SP MCB.
342 0 PUMP DB with 63A 4P MCB (10KA) -1 No as incomer set 1.00 24335.14 24,335.14
,32A 4P MCB 10KA-2Nos, 20A DP MCB 10KA-3 Nos as
Outgoing with E.C Busbars .
343 0 EXT Light DB with 63A 4P MCB (10KA) -1 No as set 1.00 32243.50 32,243.50
incomer, 1Nos Timer Switch ,20A SP MCB 10KA-18
Nos as Outgoing with E.C Busbars .
344 0 LIFT DB with 63A 4P MCB (10KA) -1 No as incomer set 1.00 23384.06 23,384.06
,40A 4P RCCB 100MA -1Nos, 10A SP MCB 10KA-6 Nos
as Outgoing with E.C Busbars .
346 127 Supply & Laying of one number of PVC insulated and Rmt 75.00 1698.02 1,27,351.50
PVC seathed / XLPE power cable of 1.1 KV grade of
3.5core 240 sq.mm direct in ground including
excavation , sand cushining protective covering and
refilling the trench etc. as required.
347 128 Supply &Laying of one number of PVC insulated and Rmt 75.00 1142.24 85,668.00
PVC seathed / XLPE power cable of 1.1 KV grade of
150 3.5core sq.mm direct in ground including
excavation , sand cushining protective covering and
refilling the trench etc. as required.
348 129 Supply & Laying of one number of PVC insulated and Rmt 50.00 791.78 39,589.00
PVC seathed / XLPE power cable of 1.1 KV grade of 95
3.5core sq.mm direct in ground including excavation ,
sand cushining protective covering and refilling the
trench etc. as required.
349 130 Supply &Laying of one number of PVC insulated and Rmt 120.00 355.18 42,621.60
PVC seathed / XLPE power cable of 1.1 KV grade of 4
core 16 sq.mm Aluminium on surface as required.
350 131 Supplying and making end termination with brass 0 0.00 0.00 0.00
compression gland and aluminum lugs for following
size of PVC insulated and PVC sheathed / XLPE
aluminum cable of 1.1 KV as required.
355 132 Earthing with copper earth plate 600 mm x 600mm x Set 8.00 5784.36 46,274.88
3.15 mm thick ISI marked including accessories and
providing masonary with cover plate having loccking
arrangement and watering pipe etc with charcoal and
salt as required.
356 133 Supplying and laying 25 mm x 6 mm CU earth strip ISI Rmt 80.00 565.22 45,217.60
marked at 0.5 meter below ground level as strip earth
electrode including soldering etc. as required.
357 134 Supplying and laying 25 mm x 6 mm CU earth strip ISI Rmt 80.00 605.34 48,427.20
marked on surface or in recess for connection etc as
358 135 Providing and fixing 8 SWG CU wire on surface or in Rmt 200.00 69.62 13,924.00
recess for loop earthing as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
359 136 Lightning Arrester. 0 0.00 0.00 0.00
360 0 Supply & fixing of lightning arrester of size 2.6' length Nos 6.00 356.36 2,138.16
made of 0.5"diameter copper rod, over which 5nos 5"
length pointed copper rods of 0.3" diameter with
suitable size of nuts and bolts.
361 0 Supplying and laying 25 mm x 6 mm CU earth strip ISI Rmt 400.00 605.34 2,42,136.00
marked on surface or in recess for connection etc as
362 0 Earthing with copper earth plate 600 mm x 600mm x Set 6.00 5784.36 34,706.16
3.15 mm thick ISI marked including accessories and
providing masonary with cover plate having loccking
arrangement and watering pipe etc with charcoal and
salt as required.
363 0 Supply, Installation, Testing and Commissioning of pre- 0 0.00 0.00 0.00
wired fluorescent fiiting / compact fluorescent fitting
/LED fitting of all sizes complete with all accessories
and lamp etc. directly on ceiling /wall or recessed in
false ceiling , including connection with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor
and earthing as required.
364 137 Ceiling mounted LED 18W Round Surface light. Nos 160.00 1211.86 1,93,897.60
365 138 Ceiling/ Wall mounted type 9W BULK HEAD Nos 10.00 1182.36 11,823.60
Luminaire Fittings.
366 139 Ceiling mounted indoor type batten type LED 22W Nos 270.00 572.30 1,54,521.00
Luminaire with LED Lamp.
367 140 Supply, Installation, testing and commissioning of 10W Nos 30.00 488.52 14,655.60
Mirror Light Fittings.
368 141 Supply & fixing of LED 36w 2'x2' Surface Mounted Nos 65.00 4273.96 2,77,807.40
Light Fittings .
369 142 Supply, Installation, Testing and Commissioning of Nos 129.00 2592.46 3,34,427.34
ceiling fan 1200mm sweep, including wiring the down
rods of standard length (upto 30 cm) with 1.5 sq.mm
FR PVC insulated single core multiatrand copper
conductor etc. as required.
370 143 Supply, Installation, testing and commissioning of Nos 55.00 1867.94 1,02,736.70
exhaust fan of 300 mm sweep 900 rpm in the existing
opening, including making the hole to suit the size of
the above fan, making good the damage complete,
connection, etc as required.
371 144 Supply, Installation, testing and commissioning of 70W Nos 16.00 7891.84 1,26,269.44
High Bay light Fittings.
372 145 Supply & fixing of 8W LED Bollards light Fittings. Nos 20.00 7711.30 1,54,226.00
373 146 Supply and installation of Pregalvanised Perforated 0 0.00 0.00 0.00
type cable trays without cover. The rate shall include
bends, Tees, all supporting brackets, anchor fasteners,
screws, bolts, nuts etc., including painting of cable
trays. Thickness of sheet steel shall be 2 mm. Support
sizes similar to ladder type trays
374 0 Size of Cable Tray :300 mm x 50 mm Rmtr 70.00 916.86 64,180.20
375 0 Size of Cable Tray :150 mm x 50 mm Rmtr 50.00 712.72 35,636.00
376 147 Supplying and fixing of clip in type modular Telephone Nos 30.00 450.76 13,522.80
socket ISI marked mounted on G.I modular box with
face plate & cover of suitable size ,including all
accesories and connection as per direction of Engineer
377 148 Supplying and fixing of clip in type modular T.V. Nos 10.00 462.56 4,625.60
antenna socket ISI marked on mounted on G.I
modular box with face plate & cover of suitable size ,
including all accesories and connection as per direction
of Engineer in Charge.
378 149 Supplying and drawing 4 pair, 0.5 sq.mm FR PVC Rmt 500.00 53.10 26,550.00
insulated coper conductor, unarmoured telephone
cable in existing surface / recessed PVC conduit as
379 150 Recessed wiring to television point with cable RG-6 Rmt 150.00 47.20 7,080.00
grade, 0.7 mm solid copper conductor PE insulated
shielded with fine tined copper braid and protected
with FR PVC sheath in in existing surface / recessed
PVC conduit as required as per direction of Engineer in
380 151 Supplying and fixing of following sizes PVC conduit 0 0.00 0.00 0.00
along with accessories in recessed wiring including
cutting the wall and making good the same in case of
recessed conduit as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
382 152 Supplying and fixing of 16 / 18 SWG metal box of 200 Nos 2.00 212.40 424.80
mm x 150 mm x 60 mm deep on surface / recess with
suitable size of phenolic laminated sheet cover in front
including cutting the wall and making good the same in
case of recessed conduit as required.
( Tel junction Box)
383 153 Supplying & Commissioning of Telephone Hand Set. Nos 30.00 866.12 25,983.60
384 154 Supplying & installation of 10 pair KRONE make set 2.00 1098.58 2,197.16
moudles with locking & key arrangements fabricated
with MS sheet & powder coated to be fixed on
concealed manner incl. good the damages.
385 155 Supply and installation of Rubber Mats 12mm thick of Nos 4.00 4130.00 16,520.00
size 2000mm x 1000mm x 12 mm thick Electrical
tested with test certificate.
386 156 Supply and fixing of fire buckets with angular set 4.00 1770.00 7,080.00
fabricated stand to fix 4 buckets in each stand for
Electrical fire protection as per standards of Electrical
387 157 Supply and fixing of Co2 fire extinguisher with Nos 4.00 8850.00 35,400.00
mounting clamps with pressure test certificate .
388 158 Supply and fixing of shock treatement charts duly set 3.00 767.00 2,301.00
laminated along with separate colour single line
diagram laminated, to be fixed in Electrical control
389 159 Supply and fixing of first aid box with medicines set 1.00 1770.00 1,770.00
complete with medicine with three years expiry date to
be fixed in Electrical control panel room.
390 160 Supply & delivery of 200-KVA silent DG sets along with set 1.00 2188900.00 21,88,900.00
engine-alternator, Control panel containing 1 No 350-
A, 4P MCCB & required protections and metering
arrangement (in tamper proof compartment with
locking arrangement) with 5-A digital KWH meter &
CTs for DG set, etc as required , acoustic enclosure,
diesel tank, residential silencer and complete as
required as per the technical specification and as per
direction of Engineer-in-charge.
391 161 Installation, testing and commissioning of 200-KVA set 1.00 59000.00 59,000.00
silent DG sets along with engine-alternator, Control
panel containing 1 No 350-A, 4P MCCB & required
protections and metering arrangement (in tamper
proof compartment with locking arrangement) with 5-A
digital KWH meter & CTs for DG set, etc as required ,
acoustic enclosure, diesel tank, residential silencer and
complete as required as per the technical specification
and as per direction of Engineer-in-charge.
392 162 1 No 3 phase 4 wire 5amp CT operated digital KWH set 1.00 20650.00 20,650.00
meter in tamper proof enclosure with locking and
sealing arrangement along with suitable bus bar
arrangement,for mounting of C.T's & 350/5-A CTs,
cable termination arrangement complete as required
393 0 Sub-Total of Electrical Works 0 0.00 0.00 76,26,352.98
394 0 Firefighting Works 0 0.00 0.00 0.00
395 163 Supplying, installing testing and commissioning of No. 1.00 325261.10 3,25,261.10
electrical motor driven Main Pump of horizontal
centrifugal end suction backpull out type with gland
packing and capable to deliver 1620LPM (96 m³/ Hr)
at 70 MWC with all necessary accessories like bronze
impeller, stainless steel shaft along with anti-vibration
mounting, coupling, coupling guard and base plate for
pump, fabricated mild steel channel,foundation bolts,
and pump should have the dry run sensor provision,
etc., as per local fire brigade requirement . The pump
shall capable to have 3.5 kg/cm² residual pressure at
top most hydrant point. The pump shall be coupled to
electrical motor with speed of 2900 RPM, Electric
supply 415V, 50 Hz and complete set shall be
mounted on a common base frame. The quoted rate
shall includes providing & fixing of coupling, coupling
gaurd and Foundation bolts etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
396 164 Supplying, installing and commissioning of Diesel No. 1.00 517866.60 5,17,866.60
Engine driven common stand by pump, horizontal
centrifugal end suction backpull out radiator cooling
type with gland packing and capable to deliver 1620
LPM (96 m³/ Hr) at 70 MWC with all necessary
accessories like bronze impeller, stainless steel shaft
along with anti-vibration mounting, coupling, gear box,
base plate for pump, fabricated mild steel channel with
foundation bolts etc., It includes providing and fixing
fuel oil tank (capacity as perTAC requirements) with
supports and necessary pipe works for diesel engine,
battery and battery charger to be connected to control
panel of diesel engine and exhaust silencer including
necessary pipe work and lagging, pump should have
the dry run sensor provision, etc., and shall be
automatic in operation with diesel engine control
diesel engine control panel with 24V DC storage
battery & its battery charger with required Ampere -
hour rating, terminal box (2 nos. of 12volts), as per
TAC including all associated electrical works.
397 165 Supplying, installing and commissioning of electrical No. 1.00 141423.00 1,41,423.00
motor driven Jockey pump of horizontal centrifugal end
suction backpull out type with gland packing and
capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC
with all necessary accessories like bronze impeller,
stainless steel shaft along with anti-vibration mounting
pad and flexible connections at discharge end of the
pipes, pump should have the dry run sensor provision
etc. and shall be automatic in operation.The pump
shall be coupled to motor of with speed of 2900RPM
and complete set shall be mounted on common base
frame. The quoted rate shall includes providing & fixing
of coupling, coupling gaurd and Foundation bolts etc.
398 166 Supply, installation, testing and commissioning of fire No. 1.00 266074.66 2,66,074.66
control panel metal clad type suitable for 415 V AC
three phase 4 wire 50Hz supply system. The panel
shall be suitable for automatic operation of the fire
pumps as per the specified parameters. The panel
shall be completely compartmentalised and complete
with relays, contactors, starters, Aluminium Bus Bars,
designation labels as per requirement, continuous
earth bar, panel separators, protective screens, cable
clamping support system, top/bottom cable gland
plates for incoming and out going cable entries.
399 167 Supplying, laying, testing & commissioning of FRLS, 0 0.00 0.00 0.00
XLPE insulated, PVC outer sheateh, steel armoured,
aluminium / copper conductor, 1100v grade power
cables with glands etc. The cables shall be laid in tray /
Hume pipe / in trenches/on walls/ floor etc. as
required. For cables laid out door the rate shall include
earth excavation providing brick and sand protection,
refilling and compacting the earth.The rate shall
excludes tray & Hume pipes. The quoted rate shall
includes the end termination for 1.1KV cables with
double compression type cable gland and heavy
duty tinned copper cable sockets as per the relevant
IS standards. Rate shall be inclusive of all sundry
materials like adhesive tape , PVC sleeves , bolts and
nuts, washers etc. including plugging unused holes.
Above 10 mm² shall be aluminium conductor type. The
minimum size of the cables shall as mentioned below,
400 0 a)3 core x 35 sqmm Aluminium conductor cable Rmt 50.00 501.50 25,075.00
401 0 b) 3 core x 10 sqmm Aluminium conductor cable Rmt 25.00 246.62 6,165.50
404 0 e) 3 core x 6 sqmm Aluminium conductor cable Rmt 60.00 224.20 13,452.00
405 168 Supplying and fixing of perforated G.I.sheet cable tray Rmt 80.00 587.64 47,011.20
with neccessory angle iron suspension supports,
anchor fasteners etc. complete. Maximum height of
suspension shall not exceed 500 mm.Size of the tray
shall be suitable for laying the above mentioned
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
406 169 G.I. Earthing strips of 50mm x 6mm thick, strip shall Rmt 80.00 221.84 17,747.20
be run on floor / ceiling / walls, from the equipment to
the nearest Earth pit with necessory accessories as
required. ( Erath pit shall be executed by other
407 170 Supplying, installing, testing and commissioning of MS 0 0.00 0.00 0.00
Pipes, ERW confirming to IS 1239 Pt - I HEAVY grade
up to 150mm dia and pipes 200mm dia and above
shall be M.S as per IS: 3589 with painting, suitable
type of supports, anchor fasteners, bolts nuts, clamps,
"U" bolts, malleable specials such as Reducers,Tees,
elbows, flanges. Including cutting, Welding, fixing in /
on walls, ceiling by using suitable supports etc,
415 171 Supplying, installing, testing and commissioning of C.I. 0 0.00 0.00 0.00
waffer type Non-return valves ( PN 16 ) swing check
type with required flanges, nuts, bolts and gaskets etc.
420 172 Supplying, installing testing and commissioning of Cast 0 0.00 0.00 0.00
Iron Body flanged Y-type Strainer with SS screen
complete with suitable flanges, nuts, bolts, gaskets
424 173 Supplying, Installing, testing and commissioning C.I. 0 0.00 0.00 0.00
butterfly valves as per BS 5155 slim seal standared
lever operated type with required flanges, nuts, bolts
430 174 Supplying, installing, testing and commissioning of Gun 0 0.00 0.00 0.00
metal chrome finished Ball valves with fittings of
screwed end type.
432 175 Supply and installation testing and commissioning of Set 2.00 3245.00 6,490.00
differential Pressure switches of suitable range (0 to 12
bar) for pumpsets complete with necessay Ball valves,
Fittings like unions / colors / reducers etc.
433 176 Supply and installation testing and commissioning of Set 3.00 1357.00 4,071.00
Pressure gauges of suitable range (0-16 bar), 100 mm
diameter dial for pumpsets completes with necessary
Ball valves, siphon, Fittings like unions / colors /
434 177 Supply, fixing, testing and commissioning of air vessel No. 1.00 28190.20 28,190.20
tank shall be fabricated out of of 200 mm dia MS pipe
to 2000 mm long complete with 25mm inlet, 25mm
drain, 25mm dia connection for air release valve
including legs, painting with red oxide primer and
finished with fire red enamel paint. It shall be inclusive
of all relevant pipes, valves, specials upto pump
header and other accessories etc.
435 178 Exhuast pipe for Diesel engine of 80 mm dia M.S. Rmt 12.00 2100.40 25,204.80
Medium grade with mineral wool insulation with
aluminum sheet. The quoted rate shall include 100 mm
diameter MS pipe medium grade conforming to IS
1239 Part-1 and mineral wool insulation with aluminum
sheeting and Pipe supports also.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
436 179 Supplying, installing, testing and commissioning of Nos. 1.00 92936.80 92,936.80
electrical motor driven Booster pump of Monoblock
type capable to deliver 900LPM at 35MWC.The pump
shall be coupled to TEFC motor of suitable HP with
speed of 2900RPM and complete set shall mounted on
common base frame.
437 180 Providing and fixing dust and vermin proof motor No. 1.00 28910.00 28,910.00
control panel fabricated from 14 SWG MS sheet with
stove enamelled paint and comprising of: (for Fire
Booster pump automatic operation ).
438 181 Supplying, installing, testing and commissioning of MS 0 0.00 0.00 0.00
Pipes, ERW confirming to IS 1239 Pt - I Medium grade
up to 150mm dia and pipes 200mm dia and above
shall be M.S as per IS: 3589 with painting, suitable
type of supports, anchor fasteners, bolts nuts, clamps,
"U" bolts, malleable specials such as Reducers,Tees,
elbows, flanges. Including cutting, Welding, fixing in /
on walls, ceiling by using suitable supports etc,
442 0 25mm nominal dia Rmt 0.00 377.60 0.00
443 182 Excavation of trenches up to 1.5 mts. in depth, for 0 0.00 0.00 0.00
laying pipes up to 150mm dia. Including forming
bottom surface to required level, refilling the trenches
with selected excavated earth around the pipe in
layers of 150mm thick, watering, consolidating.
444 0 Excavation in all kinds of soil Cum 250.00 470.82 1,17,705.00
445 183 Supplying and wrapping of anti corrosive bituminous Sqm 250.00 413.00 1,03,250.00
tape on bituminous paint.
446 184 Supplying, installing, testing and commissioning of C.I. 0 0.00 0.00 0.00
waffer type Non-return valves ( PN 16 ) swing check
type with required flanges, nuts, bolts and gaskets etc.
449 185 Supplying, Installing, testing and commissioning C.I. 0 0.00 0.00 0.00
butterfly valves as per BS 5155 slim seal standared
lever operated type with required flanges, nuts, bolts
452 186 Single headed hydrant valve as per IS 5290, made of No. 13.00 5664.00 73,632.00
SS with 63 mm dia instantaneous outlet of 80 mm dia
fanged inelt ,Blank caps , chain and hand wheels etc
453 187 SS short branch pipe with nozzle conforming to IS 903. No. 13.00 2183.00 28,379.00
454 188 M.S. Hose Box wall mounted type fabricated out of No. 13.00 3835.00 49,855.00
M.S. sheet of 16 swg. with glass fronted ( 4mm thick
glass with rubber beeding) door and size of the cabinet
shall be 750mm x 600 mm x 250 mm Quoted rate
shall be includes suitable stand for mounting, all
fasteners etc, and cabinet shall be powder coated of
approved colour both inside and outside.
455 189 15 M long, 63mm dia RRL hose conforming to IS 636 No. 26.00 4908.80 1,27,628.80
Type A with SS instantaneous couplings and Hoses
shall be stored inside fire Hose Box.
456 190 First aid Hose reel drum of 180° swinging type with No. 6.00 7280.60 43,683.60
19mm dia Rubber braided hose of 30M. length with
Ball Valve and 6mm diameter Shut off nozzle,
complete. The hose reel shall conforming to IS 884
457 191 Supplying, installing and commissioning of fire brigade No. 1.00 10384.00 10,384.00
inlet connection of 4 way with each of 63 mm dia.
built - in Gun metal instantaneous coupling type
arranged on 150 mm dia.
458 192 Supplying and fixing approved make of 25mm dia No. 2.00 3469.20 6,938.40
automatic air release valve spring loaded type
complete with unions etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
459 193 Supply, Installation,Testing & Commisioning of 0 0.00 0.00 0.00
Microprocessor based Addresable fire alarm control
panel , fully networkable with each loop capable of
taking 99 devices, 8 line x 40 character alpha- numeric
liquid crystal display .The panel shall be soft
addressable type . The panel shall be able to give pin
point location of all fire/fault conditions. Further, the
panel must be able to automatically switch off
respective control switches when ever any alarm is
triggered. The panel shall have integral SMF lead acid
batteries with sealed cells of 24 V capable of running
for a minimum of 8 hours with integral battery charger
complete as required and as per specification. The fire
alarm panel shall be suitable for software integration
with BMS & PA system.
461 194 Supplying, installing, testing and commissioning of No. 10.00 4423.82 44,238.20
Addressable Manual Call Point with back box.
462 195 Supplying, installing, testing and commissioning of No. 10.00 7847.00 78,470.00
Analogue Addressable Loop powered Sounder with
463 196 Supplying, installing, testing and commissioning of No. 150.00 3599.00 5,39,850.00
photo electric (optical) smoke detector with base,
junction box and other accessories.
464 197 Supplying, installing, testing and commissioning of rate No. 1.00 3717.00 3,717.00
of rise heat detector with base, junction box and other
465 198 Supplying, installing, testing and commissioning of 2C Rmt 750.00 161.66 1,21,245.00
x 1.5 mm², armoured, single stand, outer sheathed,
FRLS, PVC insulated copper conductor cable confirming
to specified IS standards .
466 199 Providing and Fixing ISI marked ABC stored pressure No 10.00 3410.20 34,102.00
type Fire extinguisher of 6 Kgs. Capacity confirming to
IS: 15683 with discharge hose, nozzle, Mono Amonium
Phosphate base & ABC powder pressurised with
nitrogen gas carrying handle and wall mounting
bracket etc as required.
467 200 Providing and Fixing of 4.5 Kgs. Capacity CO2 gas type No 10.00 6572.60 65,726.00
ISI marked fire extinguisher (IS: 15683) fitted with
high pressure 1 mtr. Long discharge hose & horn
complete with refill gas, carrying handle and wall
mounting bracket etc as required.
468 201 Providing and Fixing of of 2 kG capacity Eco Friendly, No 10.00 8932.60 89,326.00
Stored pressure type filled with HFC 134 A ( clean
agent fire extinguishant having Zero Ozone depletion
potential ) Clean Agent Fire Extinguishers with safety
seal, pressure guage, controllable discharge
mechanism, helium leak detection tested and
conforming to IS 15683 complete with initial charge as
469 202 Providing and Fixing of Mechanical Foam type fire No. 2.00 2827.28 5,654.56
extinguisher 9Lts. Capacity, with initial filling in brand
new cylinder with powder coated finish, fitted with Gun
metal union, high pressure CO2 gas cartridge, hose
and ABS type branch pipe and wall mounting bracket
etc. complete, confirming to IS: 15683.
470 203 Fire buckets round bottom type enamel painted, white No 4.00 501.50 2,006.00
inside & Red out side and Letter "FIRE" in black out
side and handle with mounting bracket.
471 204 Fire bucket stand fabricated by MS angles to install 2 No 2.00 2997.20 5,994.40
Nos. of buckets.
472 205 Floor identification signage (i.e, GROUND FLOOR… No 4.00 767.00 3,068.00
ETC.,) at each stair enclosure on every floor, indicating
the floor number in words, lettering size shall be 7.5cm
with contrasting colour from back ground. Size shall be
473 206 Fire Exit signage at each stair on every floor, No 10.00 531.00 5,310.00
indicating the direction of fire exit, lettering size shall
be 7.5 cm with contrasting color from back ground.
Size shall be 15cm x 60cm.
474 207 Providing and fixing in position the signage of " Fire No 10.00 531.00 5,310.00
Extinguisher " to be fixed above the every
extinguisher. Size 6" x 8"
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
475 208 Providing and fixing in position the signage of " Fire No 6.00 531.00 3,186.00
Hydrant & Hose Reel " to be fixed near the every fire
shaft at all floors. . Size 6" x 8"
476 209 Supplying, installing, testing and commissioning of 6 Nos 10.00 1711.00 17,110.00
Watt wall mounted speakers with built in line matching
transformer, grill flush mounting type in side the utility
477 210 Supplying, installing, testing and commissioning of 12 Nos 12.00 8243.48 98,921.76
Watt 85 dB LMT wall mounted speakers with built in
line matching transformer, grill flush mounting type in
side the utility rooms.
478 211 Supplying, installing, testing and commissioning solid Nos 1.00 101173.20 1,01,173.20
state Amplifier of 500 W RMS out put in rack, including
necessary control wires, jocks etc. complete.
479 212 Supplying, installing, testing and commissioning of P.A. Nos 1.00 77874.10 77,874.10
Console 8 zone with priority module micro processor
based, mixing amplifier, with 6 zone for suitable
selection module, power supply unit & goose neck
micro phone etc.
480 213 Supplying, installing, testing and commissioning of 19" No 1.00 36568.20 36,568.20
Rack 650mm depth, 16U high amplifier rack assembly
made of aluminum channel equivalent to euro rack
system, with side and rear panels made of 14 swg
powder coated sheet steel front transparent
persplexdoor and with rails, rollers & bearings. Fans
shall provided at the top for ventilation side panels will
be ventilated type. The rack shall be powder coated of
approved color and spare 'U' shall be covered with
481 214 Supplying, installing, testing and commissioning of 2 Rmt 700.00 76.70 53,690.00
Core x 1 Sq.mm PVC insulated FRLS unarmored Cable
with Accessories confirming to IS standards and
specifications. The quoted rate shall includes of Acrylic
Fire stop Sealant in the opening for cables passing
through fire compartment walls of RCC floors,
masonry walls to provide up to 2 hours fire rating.
482 215 Supplying, installing, testing and commissioning 0 0.00 0.00 0.00
approved make PVC FRLS conduits on ceiling / wall /
floor etc. complete with accessories like, Junction
boxes, Collars, Bends etc.
484 0 Sub-Total of Firefighting Works 0 0.00 0.00 53,21,454.26
0 Grand Total 10,04,80,783.05
0 Grand Total 10,04,80,783.05
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ BOL 008 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Bolangir CHC at Loisingha.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .