CWE/P-53/2019-20 SPECIAL REPAIR TO BLDG NO. ENP- 31 AT 6 BIHAR UNDER GE (WEST) PATHANKOT

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of floor hearth and wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M & L plain Cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate), 75mm thick as in sub base complete all as specified and directed.

M & L vitrified ceramic tiles light/dark shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L vitrified ceramic tiles light/dark shade 10mm thick (square/rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as in skirting/dado over and including 10mm thick rendering in cement mortar 1:4 to recieve wall tiles complete all as specified and directed.

M & L coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with cement mortar 1:6 complete all as specified and directed.

M & L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to recieve wall tilescomplete all as specified and directed.

Dismantling stone slabs and tiles laid dry or laid dry and pointed any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 25mm thick Granite black colour (of any type) work (table rubbed and polished) as in , cooking platforms and like in cement mortar 1:4 over cement rendering 20mm thick in cement mortar 1:4 including pointing in white cement (1:2) unsing marble dust with admisture of pigment to match with shade of granite, cutting hole/ opening for wash hand basin including moulding edges complete all as specified & directed.

M & L forchequred cement concrete tiles rubber moulded glossy finish 30 cm x 30 cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directedcomplete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and directed.

M & L machine kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including rendering 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete complete all as specified and directed.

M & L grinding and polishing to old kota stone flooring to obtain mirror finish complete all as directed by Engr-in-Charge.

Demolition of stone/brick masonry in cement mortar or cement/ lime mortar complete all as specified and directed.

M & L Brickwork with sub-class `B’ burnt bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with sub class ‘B’ burnt old size brick, straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surfaces finished even and smooth(without using extra cement) complete all as specified and directed.

M & L for rendering 15mm thick other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth(without using extra cement) complete all as specified and directed.

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, in cover slabs( for manholes etc.)chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) complete all as specified and directed. (Reinforcement shall be measured and paid separately).

M & L Mild steel TMT bar 10mm dia and over including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area exc 1.5 Sqm but n. exc 4.0 sqm each complete all as specified and directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area nexc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each and refixing in same opening incuding easing and adjusting complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening incuding easing and adjusting complete all as specified and directed.

Taking down chowkat or frames not exc 1.5 Sqm each and refixing in other/same opening incuding easing and adjusting complete all as specified and directed.

Taking down chowkat or frames exc 1.5 Sqm but n. exc 4.0 sqm each and refixing in other/same opening incuding easing and adjustingcomplete all as specified and directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area exc 1.5 Sqm but n. exc 4.0 sqm each and refixing in other/same opening incuding easing and adjusting complete all as specified and directed.

S & F 35 mm thick factory made second class hardwood rail and style plain framed panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as directed and specified.

S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton door shutters, open rebated & prepared to recive glass/ gauged etc as in mosquito proof door shutter etc with out sash bars, edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clasue 8.20(a) and fixed to chowkats complete all as specified and directed.

S & F Steel window/Ventilator factory made out of box type for double shutter i.e glazed & gauged shutter with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including grills 10 mm square bar, peg stay etc. , glazing (glass pane, plain 3mm thick) , guaging (GI wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.40mm) and two coats synthetic enamel paint over a coat of red oxide primer, tarred hold fast fixed in wall in PCC 1:2:4 type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and directed by Engr-in-Charge.

S & F MS butt hinges 100 mm size heavy weight cold rolled complete all as specified and directed.

S & F MS barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed.

S&F MS pressed handle oval type, stove enamelled black 150mm size complete all as specified and directed.

S & F door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S & F in repairs MS butt hinges 100 mm size medium weight cold rolled complete all as specified and directed.

S & F in repairs MS barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and directed.

S & F in repairs extruded aluminium alloy handles 150mm long, fabricated type anodised complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S & F second class HW small fittings such as brackets of any type, latch and hinge blocks, brackets of any type, latch & hinge blocks, shaped door and window stops ad the like including al necessary labours articles n.exc 200 cucm each complete all as specified and directed.

S & F MS butt hinges 65 mm size medium weight cold rolled complete all as specified and directed.

M & L 2nd class hard wood fillets square, rectangular or triangular in section, clean swan, secured with nails or brads of size n. exc 3 sqcm fixed in repairs complete all as specified and directed..

S & F 2nd class hardwood, plain fillets, square, rectangular or triangular in sectional area exc 13 sqcm and n.exc 25 sqcm, fixed with screws.

M&L Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators and cabinets/ partitions with one or more rebates including joining cleat for fixing etc. complete all as specified (mimimum thickness of powder coating 50 micron).

S & F powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

Supply and fix 12mm thick pre-laminated BISON board with decorative lamination on both sides complete all as specified

S & F aluminium powder coated grills for windows and ventilators; design and pattern as directed by Engr-in-Charge.

S & F sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed.

M & L door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coucred with heat moulded wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail bottom rail panelling of wood grain printed PVC sheet to be fited in the MS frame welded/seald to the stiles & rails with suitable PVC sheet beading and jointed together with saluent cement suppling & fixed in the framed site as per specification & drawing complete all as specified and directed.

S & F PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reiforced with MS squre tube as per specification and drawing complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section 125mm long complete all as specified and directed.

S & F Aluminium handles cast type anodised of 125mm complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 100mm size complete all as specified and directed.

S & F in repairs mild steel powder coated curtain rod 20 mm dia, 1mm thick complete as approver by GE complete all as specified and directed.

S & F in repairs mild steel powder coated curtain rod brackets fancy type suitable for 20mm dia rod with funnel complete as approver by GE complete all as specified and directed.

Taking down eves gutter and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks atc., incl cleaning or refixing or removal to store (mesured overall as fixed along the centre line over fittings the accessories) complete all as specified and directed.

S & F UPVC pipe 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F UPVC pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and directed.

S & F UPVC 110mm bore 'T' equal or unequal with access door complete all as specified and directed.

S & F UPVC 75mm bore 'T' equal or unequal complete all as specified and directed.

S & F UPVC bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S & F UPVC bends any radius, 75 mm bore complete all as specified and directed.

S & F UPVC 110mm bore vent cowl complete all as specified and directed.

S & F in repairs 75mm PVC floor trap with gratings incl jointing to waste pipe fixed in solvent cement complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

M & L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

S & F in repairs single Piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings Size: 360x725 x735 mm, S Trap-300 mm white with combined flush tank (Cascade type) incl seat covers complete.Make : SLS-WHT-6855SUF of Jaquar /equvalent make of Parry ware or Hindware complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints , complete all as specified.

S&F in repair Vitreous china under counter wash basin, white, rectangular shape of size 595 x 420 x 200 mm, including brackets, 32 mm brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S & F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs washers and wastes, including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mm x 160mm complete all as specified and directed.

S & F in repairs brass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap make: ALD -563 Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

S & F in repairs Brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directad Make: FLR-5041N of Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

S & F in repairs 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, screwed for iron pipe of brass ferrule and fixed in repair complete all as specified and directed.

S & F in repairs Brass chromium plated angular stop cock with wall flange screwed for 15mm dia bore iron pipe complete all as specified and directad Make: FLR-5053N of Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

S & F in repairs Viterous China urinal, half stall type, white (excluding flushing cistern, flush pipe) complete all as specified and directed.

S & F urinal spreader cast copper alloy chromium plated complete all as specified and directed.

S & F in repairs vitreous China urinal partition wall complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs CP Grating with hole /with out hole of dia 125 mm complete all as directed in repairs complete all as specified and directed.

S & F in repairs looking mirror of size 900mm x 600mm, 4.0 mm thick mounted 6mm thick plywood/asbestos sheet building board complete all as specified and as directed.

S & F in repair corner glass shelf with bracket. Make : ACN-1173 of JAQUAR/equivalent make of Hindware or Parryware complete all as specified and directed.

S & F in repairs brass chromium plated toilet roll holder with flap. Make : AKP - 35753P of Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

S & F in repairs brass chromium plated single towel rail 600mm long. Make : ACN - 1111 SM of Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

S & F in repairs brass chromium plated fancy type pillar cock with 140mm extension body screwed down, high pressure, with crutch handle, screwed both ends for 15 mm dia bore iron pipe or for unions. Make : ARI-39021 of Jaquar/equivalent make of Hindware/Parryware complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

M & L for complete removal of existing treatment of ceiling and apply three coat of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coat of distemper oil emulsion over two coats of wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment of wall and apply two coat of distemper oil emulsion over over two coats of wall care putty complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and apply two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for complete removal of existing treatment of wall and apply two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L applying two coats of synthetic enamelled paint over a coat of pink primer over wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10 centimetre width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap) complete all as specified and directed.

S & F rotational moulded polythene water storage tank, tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete complete all as specified and directed.

S & F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms complete all as specified and directed.

S & F in repair gun metal or gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

Dismantling of wall and ceiling boards (fibre, plup, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

S & F for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39 mm x 24mm x 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mmx24mmx0.8mm thick and thick wall angle 22.2mmx22.2mmx 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as directed.

S & F solid PVC wall lining consisting of 5mm thick plain/ colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer's specifications and drawing.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturer's specifications and drawing.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping ( weather full thickness removed or only a part thereof) complete all as specified and directed.

Removal of excavated soil to a distance exe 250 m but nexc 500m and depositing where directed at a level nexc 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any thickness on roofs complete all as specified and directed.

M & L PCC (1:2:4) Type B1 (using 20 mm graded stone aggregates as in roofs kerbs, bands etc. complete all as specified and directed.

M & L 40mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded agg as in padding course on roof to maintain proper slope complete all as specified and directed.

M&L rendering 10mm thick on concrete surface(parapet/facia/chajjas and the like) in CM 1:4 and finishing even and smooth without using extra cement with using WPC complete all as specified and as directed (Note:- WPC will be measured and paid separately) complete all as specified and directed.

Supply only liquid water proofing compound

M & L for providing water proofing treatment with APP based polymeric membrane minimum weight 3.5 Kg/sqm and minimum thickness 3mm, reinforced with polyester non woven fabric (weight not less than 150gm/sqm) applied over one coat of oil based bitumen emulsion primer @ 0.5 liter/sqm(or as per the manufacturer instructions) including cleaning of surface throughly from dust, dirt and dismantling of old membrane any type and providing 15mm thick rendering in CM 1:4 with WPC (as per manufacturer instructions) followed by new membrane with torch application with 10 cm overlaps on sides and end joints. A coat of blown bitumen 85/25 @ 1.2 kg/sqm to be applied on top of memberane, finally painting the surface with bituminous aluminium paint @ 100gm/sqm.(Note:- WPC will be measured and paid separately) complete all as directed by Engr-in-Charge.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete of 150mm dia complete all as specified and directed.

M &L Salt-glazed stoneware drain pipes 150 mm dia fixed to roof with cement concrete 1:2:4, type B-0 (12.5mm graded crushed stone aggregate) grade 'A' laid in trenches and jointed complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M & L Block board 12 mm thick, grade 2 quality, interior grade, commercial type complete all as specified and directed.

M & L Block board 18/19 mm thick, grade 2 quality, interior grade, commercial type complete all as specified and directed.

M & L decorative laminates 0.9mm thick type I, or surface finish, colour and pattern as approved complete all as specified and directed.

S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electroglavanised complete all as specified and directed.

S & F 150 mm extruded brass handles, fabricated type, polished bright complete all as specified and directed.

S & F 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (c) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per srl item No 141.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per srl item No 141.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)

M&L Point wiring for light/fan/bell point controlled by one switch with 4 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and including 4sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F in replacement existing UNSV sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose usning PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as directed by Engr-in-chagre

S & F in repl of Slim Recess mounted square LED panel 20 watt 2 x 2 deep drawn CRCA sheet steel housing duly powder coated with high efficient LEDs & glare full opal diffuser, IP 20 to ensure glare free & even distribution of light complete all as specified and directed.

S & F in replacement Decorative Gate Light Moon Opal made up of high Grade unbreakable polycarbonate material suitable for 14/20 watt Led Lamp complete all as specified and directed.

Taking down ceiling fan by disconnecting the electric connection and dismantling the blades and removing from ceiling/roof of bldg by descrewing the nut, bolt etc complete all as specified and directed.(Note-Old u/s balance ceiling fans will be deposited in Store yard) complete all as specified and directed.

Rehanging only of ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector to fan including minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of required color all as pewr required and directed by Engr-in-charge.

S & F in replacement of CFLs with LED smart Lamp, B22 type ,14 watt,complete all as specified and directed.

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing, charging time 10-12 hours and back up time 04 hours, IP-20 ,rated voltage 230 V, 50 hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed. Notes: (i) LM79 report from third party (instead of company in house lab) NABL/UL accredited lab (ii) LM 80 report from LED manufacturer (iii) Test certificates to be submitted before commencement of work/ claiming for payment . (iv) Warranty certificate for minimum 2 years to be submitted from OEM.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 240V, 20Amp complete all as specified and directed

M & L sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 08 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

M & L MCB Single Pole 240 volts any rating from 20 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

M & L MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame, necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm 4 core and taking down of old unservicable /brunt electric cable complete all as specified and directed. Note:- Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces complete all as spd and supply and fixing propeller type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as specified.

Supply and laying in replacement of existing unserviceable/ burnt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: (i) Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit. (ii) Proper colour coding is to be followed as per IS Specification. (iii) Test certificates of cables to be submitted before commencement of work/ claiming for payment. (iv) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement. (v) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and including 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN series of Schenieder Cat Part No:- A9HVD04L or equivalent in any of the make mentioned in list of product . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

Excavation in trenches n. exc. 1.5 metre wide and n. exc. 1.5 metre in depth for laying of UG cable and getting out in soft/loose soil complete all as specified and directed.

Returning filling in and including spreading, watering and well ramming in layers not exceeding 25 cm thick in soft /loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Sand cushioning for under ground cable upto 8 cm before laying the cable and 15 cm after laying and stretching the cable and punned down to form a bed.The punning shall be done by hand complete all as specified and directed.

Material and labour for sub class 'B' bricks well burnt old size laid dry flat perpendicular to the length of cablefor protection of cable complete all as specified and directed.

Supply and fixing in replacement of GI tubing medium grade of 40 mm nominal bore of pipe in trenches/under roads/ under culverts/under paths/under floor/on walls /with pole in new position with screwed sockets joints, together with all tube fittings complete all as specified and directed .

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Notes :- (i) Contractor shall produce LM79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee/ warranty of complete fitting/ fixture for minimum 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of the material at no extra cost. (iv) Contractor shall arrange complete material at site for approval of GE before incorporation in the work. (v) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

GANDOTRA CONSTRUCTION CO

Abrol construction co

M/S PRAJAPATI ENGINEERS

kay gee construction co