Repair/maint to wooden and steel furniture including re-canning, weaving, painting etc at AF Stn Bihta.

Amount

BED PLYWOOD TOP (FD-246,247) (a) M&Lfor taking out old damaged/unserviceable head rest of bed plywood top and supply & fixing new head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including preparation of surface & applying high gloss french polish on newly fixed head rest to match with existing surface complete all as shown in drawings and as directed.

(b) All as per item no.1 (a) above but broken foot rest complete all as shown in drawings and as directed..

(c) M&L for taking out old damaged/unserviceable long rails of bed plywood top and supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1800x100x35 mm and applying high gloss french polish on newly fixed long rails to match the with existing surface complete all as shown in drawings and as directed

(d) M&L for taking out old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick commercial type, grade BWP (minimum size 6’ x 3’) complete all as shown in drawings and as directed

CHAIR DINING(FD-16, 279,228, 203, FD/MAP-II/04 (a) M&L for taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as shown in drawings and as directed

(b) All as per item No.2 (a) above but rear leg complete all as shown in drawings and as directed.

(c) All as per item No.2 (a) above but side railscomplete all as shown in drawings and as directed.

(d) All as per item No.2 (a) above but rear rails complete all as shown in drawings and as directed.

(e) All as per item No.2 (a) above but front rails complete all as shown in drawings and as directed.

(f) All as per item No.2 (a) above but side stiffeners complete all as shown in drawings and as directed.

(g) All as per item No.2 (a) above but center stiffeners complete all as shown in drawings and as directed.

(h) All as per item No.2 (a) above but back rest complete all as shown in drawings and as directed

(j) All as per items No.2 (a) for taking out old broken PVC Seat 4 mm thick with hole scewed with rail of Chair dining MAP and supply & fixing new PVC Seat 4 mm thick with hole scewed with rail all as per drg and as directed.

CHAIR EASY(FD- 17,201,229) (a) M&L for taking out old broken unserviceable front/rear leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match with existing surface of chair complete all as shown in drawings and as directed

(b) All as per item No.3(a) above but front rail complete all as shown in drawings and as directed.

(c) All as per item No.3(a) above but front/rear rail of seat complete all as shown in drawings and as directed

(d) All as per item No.3 (a) above but top rail of back complete all as shown in drawings and as directed

(e) All as per item No.3 (a) above but bottom rail of back complete all as shown in drawings and as directed.

(f) All as per item No.3(a) above but arm complete all as shown in drawings and as directed.

Table Peg (FD-25,236,277) (a) M&L for taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surfacecomplete all as shown in drawings and as directed

(b) All as per item No.4 (a) above but side rail complete all as shown in drawings and as directed.

(c) All as per item No.4(a) above but front/rear rail complete all as shown in drawings and as directed.

(d) All as per item No.4 (a) above but side stiffener complete all as shown in drawings and as directed

(e) M&L for taking out broken/un-serviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board ,bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as shown in drawings and as directed

TABLE CENTRE(FD-29, 274 & 235) (a) M&L for taking out old broken unserviceable leg of table centre and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as shown in drawings and as directed.

(b) All as per item No.5 (a) above but broken side rail complete all as shown in drawings and as directed.

(c) All as per item No.5(a) above but front/rear rail complete all as shown in drawings and as directed.

(d) All as per item No.5(a) above but broken side stiffener complete all as shown in drawings and as directed.

(e) M&L for taking out broken/un-serviceable table top of table centre and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE 3’X2’ WITH/WITHOUT DRAWER(FD -283 , 284,55 ,209, 231) (a) Taking out old broken unserviceable leg of table 3’X2’ with/without drawer and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed leg to matchr with existing polished surface complete all as shown in drawings and as directed.

(b) All as per item No.6 (a) above but broken side raicomplete all as shown in drawings and as directed.

(c) All as per item No.6(a) above but broken front/rear railcomplete all as shown in drawings and as directed.

(d) All as per item No.6 (a) above but broken side stiffenercomplete all as shown in drawings and as directed.

(e) All as per item No.6(a) above but broken center stiffenercomplete all as shown in drawings and as directed.

(f) M&L for taking out old broken/un-serviceable table top of table 3’X2’ with/without drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as shown in drawings and as directed.

TABLE DRESSING LADIES(FD-251,378) (a) M&L for taking out old broken looking mirror of table dressing ladies and supply & fixing new looking mirror 5 mm thick of suitable size complete all as shown in drawings and as directed. Make:-Modi Guard/Saint Gobain)

(b) M&L for taking out old broken sliding glass shutter of table dressing ladies and supply & fixing new sliding glass 4 mm thick of suitable size complete all as shown in drawings and as directed

(c) Taking out old unserviceable top of table dressing ladies with mirror and supply & fixing new top made out 19/20 mm thick pre-laminated particle board bonded with phenol formaldehyde of teak venerred finish of approved quaility complete all as specified and as directed and shown on drawing.

(d) Removing of brocken damaged back plywood of mirror of table dressing ladies and S&F new plywood BWR Grade 6 mm thick (No of ply 5 ISI marked) complete all as specified and as directed and shown on drawing.

TABLE BED SIDE(FD-28,248, 276, 210) (a) M&L for taking out old broken/un-serviceable side of table bed side and supply & fixing new side of suitable size made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side and bottom shall be covered with 3mmX 18mm size teak wood beading fixed with panel pins complete all as shown in drawings and as directed

(b) All as per item No.8 (a) above but broken top of suitable size complete all as shown in drawings and as directed.

(c) M&L for taking out old unserviceable/broken center/bottom shelf of table bed side and supply and fixing new center /bottom shelf of suitable size, made out of 12 mm thick pre- laminated particle board bonded with formaldehyde synthetic resin, exterior grade, one side with approved shade & balancing white lamination on other side complete all as shown in drawings and as directed

(d) M&L for taking out old unserviceable/broken back of table bed side and supply & fixing new back made out of 6 mm thick commercial grade plywood of suitable size complete all as shown in drawings and as directed.

TABLE WRITING(FD-249, 33. 275 ) (a) M&L for taking out old broken unserviceable leg of table writing and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surfacecomplete all as shown in drawings and as directed

(b) Taking out old unserviceable shutter from table writing and supply and fixing new shutters made out of 19/20 mm thick prelaminated particle board bonded with phenol formaldehyde exterior grade one side teak venerred finish and other side having balancing wihite lamination and to be fixed with new 50 mm long cold rolled mild steel hinges medium grade, 40 mm round steel knob and lock of steel body 4 levers (make Godraj) with duplicate Key of approved quality complete all as specified and as directed.

(c) Taking out old unserviceable drawers from table writing and supply and fixing new drawers made out of 19/20 mm thick prelaminated particle board bonded with one side teak face and balancing other side with white laminatyion, borded with phenal formal dehyde for front side and 1 st class well seasoned teak wood for side back and 6 mm thick commercial ply wood (No of ply 5) for bottom of drawers including supply and fixing of new one No 40 mm round steel knob of approved quality and Steel lock with duplicate keys 4 lever (Godrej pattern) complete all as directed.

(d) M&L for taking out broken/un-serviceable table top of table writing and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

SOFA SET 4 /5 SEATER(FD- 281& 373) (a) M&L for taking out old broken/unserviceable arm of sofa set 5 seater and supply & fixing new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete all as shown in drawings and as directed.

(b) All as per item No. 10 (a) above but broken front leg complete all as shown in drawings and as directed.

(c) All as per item No. 10 (a) above but broken rear leg complete all as shown in drawings and as directed.

(d) All as per item No.10 (a) above but broken rail of single seater complete all as shown in drawings and as directed.

(e) All as per item No. 10 (a) above but broken long rail of long pieces 3 seater complete all as shown in drawings and as directed.

(f) M & L for removing old unserviceable foam cushion along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick foam cushion, 32 density, size 520 x 560 mm duly covered with long cloth and leatherised rexin cloth /tapestry cloth of approved quality complete all as shown in drawings and as directed. MAKE : Sleepwell/Donlop

SIDE BOARD FD-241 (a) M&L for taking out old broken unserviceable leg of side board and supply & fixing new suitable leg made of Ist class wood (MP teak) of suitable size including preparation on new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as shown in drawings and as directed

(b) All as per item No 11 (a) above but front and rear long stiffener complete all as shown in drawings and as directed

(c) All asper item No 11 (a) above but side stiffener complete all as shown in drawings and as directed

(d) M&L for taking out old unserviceable/broken back ply of side board and supply & fixing new back made out of 6 mm thick commercial grade plywood of suitable size complete all as shown in drawings and as directed

(e) M&L for taking out broken/unserviceable top of side board and in lieu of supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated particle board and including all round teak wood beading 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete all as shown in drawings and as directed

(f) All as per item No 11.04 (e) above but sides complete all as shown in drawings and as directed.

(g) All as per item No 11.04(e) above but shutter complete all as shown in drawings and as directed.

CANNING OF MISCELLANEOUS WOODEN FURNITURE (FD-15,16,17,20(M),120(M),203,201,228,229,261,262,279,280) Taking out existing worn out cane plasitc from seat & back of misc type of chairs and re- canning the same in existing design in goodrej pattern with new white half round plastic cane 2 mm wide weaving and for bordering 3 mm wide complete as shown on drg and as specified and as directed

CHAIR WRITING(FD-250,280) (a) M&L for taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size ,made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

(b) All as per item No.12 (a) above but rear leg complete all as shown in drawings and as directed.

(c) All as per item No.12 (a) above but side rails complete all as shown in drawings and as directed.

(d) All as per item No.12 (a) above but rear rails complete all as shown in drawings and as directed.

(e) All as per item No.12 (a) above but front rails complete all as shown in drawings and as directed.

(f) All as per item No.12 (a) above but arm complete all as shown in drawings and as directed.

(g) All as per item No.12 (a) above but side stiffeners complete all as shown in drawings and as directed.

(h) All as per item No.12 (a) above but center stiffeners complete all as shown in drawings and as directed.

(j) All as per item No.12 (a) above but back rest complete all as shown in drawings and as directed.

TABLE DINING 6/8 PERSONS(FD-30, 239, 273, 376) (a) M&L for taking out out old broken unserviceable leg of table dining and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as per drg and as directed.

(b) All as per item No.13 (a) above but broken side rail complete all as shown in drawings and as directed.

(c) All as per item No.13 (a) above but broken front/rear rail complete all as shown in drawings and as directed.

(d) M&L for taking out out broken/un-serviceable table top of table dining(6 persons) and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as per drg and as directed.

TABLE COMPUTER (TP) (a) Taking out broken/un-serviceable Table top of Tabole computer and supply & fixing new Table top of suitable size, made of 18 mm thick pre-laminated particle board ,bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss french polish complete all as specified and directed.

(b) Taking out broken/un-serviceable Key board tray, Mouse Tray and drawer of Tabole computer and supply & fixing new Key board tray, Mouse Tray and drawer of suitable size, made of 18 mm thick pre-laminated particle board ,bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss french polish complete all as specified and directed.

(c) M&L for prepration of MS Square pipe frame of computer table and applying one coat of black synthetic enamel paint complete all as specified and directed.

POLISHING TO WOODEN FURNITURE. M & L for preparation of old polished surfaces of wood and wood based material by rubbing down the old polish from the wooden surfaces with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish as per manufacturers instructions till glossy finish is achieved for the following furniture itemscomplete all as shown in drawings and as directed :- (a) Bed plywood top.

(b) Chair dining

(c) Chair Writing

(d) Chair wooden bottom without arm

(e) Chair Easy.

(f) Stool dressing CB.

(g) Sofa Set four Seater

(h) Sofa Set five Seater

(j) Table peg.

(k) Table Centre.

(l) Teapoy.

(m) Table Dining 6 persons.

(n) Table Dining 8 persons.

(o) Table 3’x2’ with drawer/without drawer.

(p) Table dressing ladies.

(r) Table bed side.

(s) Table writing.

STEEL FURNITURE ALMIRAH STEEL LARGE FD-67 (M)/351/1031 (a) Taking out unserviceable broken leg from almirah steel large and supply & fixing new leg made out of plain back iron sheet 1mm thick of suitable size and welded including applyining two coats olive green synthetic enamel paint over a coat of red oxide primer with spray to match the adjoinig surface complete all as shown in drawing and directed .

(b)Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej pattern (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown in drawing and directed.

(c) Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown in drawing and directed.

(d) Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as shown in drawing suitable for three way locking device and fixed with suitable size of MS screws including applying two coats of synthetic enamel paint over a coat of red oxide primer by spray complete all as shown in drawing and directed.

(e) Dismantling carefully and taking out old unserviciable/damaged shelf of almirah large steel and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applying two coats of olive green synthetic enamel paint over a coat of redoxide primers with spray and complete all as shown in drawing and directed.

(f) Dismantling carefully and taking out unserviciable/damaged door single leaf of Almirah large steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of olive green synthetic enamel paint internally and externally over a coat of red oxide primer with spray complete all as shown in drawing and directed.

ALMIRAH STEEL MEDIUM FD-67(M)/243/350/1032 (a) Taking out unserviceable broken leg from almirah steel medium and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded and applying two coats olive green synthetic enamel paint over a coat of redoxide primer with spray complete all as shown in drawing and directed.

(b) Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej pattern (Including duplicate keys of stainless steel of size 65mm to almirah steel medium complete all as shown in drawing and directed.

(c)Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown in drawing and directed.

(d)Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of olive green synthetic enamel paint over a coat of redoxide primer with spray complete all as shown in drawing and directed.

(e) Dismantling carefully and taking out old unserviciable/damaged shelf of almirah steel medium and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applying two coats of olive green synthetic enamel paint over a coat of red oxide primer with spray complete all as shown in drawing and directed.

(f) Dismantling carefully and taking out unserviciable/damaged door single leaf of almirah steel medium and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applying two coats of olive green synthetic enamel paint internally and externally with over a coat of red oxide primer with spray complete all as shown in drawing and directed.

CHAIR TUBULAR STEEL WITH ARM ( FD-75(M) (a) Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned as per Godrej patten and applying two coats of high glossy french Polish and fixed with new screws complete all as shown in drawing and directed.

(b) All as per serial item No.17 (a) above but old unserviceable back complete all as shown in drawing and directed.

(c) Removing of existing broken unserviceable arm and supply & fixing new arm of 2nd class hard wood of suitable size and applying two coats of high glossy French Police fixed with new screwscomplete all as shown in drawing and directed.

(d) S&F MS cleats of size 25 mmx 50mmx3mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete all as shown in drawing and directed.

CHAIR VERANDAH STEEL (FD-19/256) (a) Removing of unserviciable/torn nylon newar/ plastic cane/PVC Shoes from existing chair and supply & recanning with new plastic cane 4mm wide 1/2 round of approved quality all as directed irrespective of what is shown on drawing including painting the frame with one coat of white synthetic enamel paint before recanning including S & F PVC shoes to the legs complete all as shown in drawing and directed.

(b) Removing the existing unserviceable MS rod and supplying and fixing new 10mm MS rod through welding between back side and seat complete all as shown in drawing and directed.

TABLE (3'X2') WITHOUT DRAWER (FD-1007/1008) (a) Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete all as shown in drawing and directed.

(b) Removing of old broken drawer from existing table 3’x2’ and providing new steel drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer complete all as shown in drawing and directed.

(c) Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock, with duplicate keys complete all as shown in drawing and directed.

TABLE OFFICE CLERK STEEL (FD-84 (M)/1004 (a) Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete all as shown in drawing and directed.

(b) Removing of old broken drawer from existing table office clerk steel and providing new steel drawer made out of 1mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer complete all as shown in drawing and directed.

(c ) Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete all as shown in drawing and directed.

LOCKER STEEL(FD-257/1029) (a) Taking out unserviceable broken leg from Locker steel and supply & fixing new leg made out of plain black iron sheet 1mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface complete all as shown in drawing and directed.

(b) Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker and supply & fixing new mild steel chromium plated hasp and staple 100mm size complete all as shown in drawing and directed.

(c) Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new mild steel chromium plated handles 100 mm long of approved quality complete all as shown in drawing and directed.

(d)Taking out old unserviceable broken hinges of shutters without damaging the adjacent parts of locker and supply & fixing new MS hinges of 75 mm long of approved quality complete all as shown in drawing and directed.

TEAPOY VERANDAH (a) Removing the existing u/s top & supply & fix 18mm thick pre-laminated particle board with 4mm thick second class hard wood edging all-round & treated with french polish complete all as shown in drawing and directed.

(b) Preparing old painted steel surfaces of frame & apply one coat of white synthetic enamel paint complete all as shown in drawing and directed. .

TABLE OFFICE OFFRS STEEL (FD-1003) (a) Removing the existing unserviceable/ broken top of steel table office offrs S/F new table top of 1370 X 760mm of 18mm thick particle board bonded phenol formal dehyde with one side lamination other side commercial face (Nova pan) with standard PVC edging around complete all as shown in drawing and directed.

(b) Removing the existing unserviceable lock & S/F new 6 levers brass lock with brass lever & stainless steel keys in duplicate suitable for drawers of table table office officer all as specified and shown on drg.

(c) S& F new brass locks 6 levers with brass levers & stainless steel keys in dupl. For cupboards of table office offrs steel incl removing existing serviceable lock all as specified & shown on drg.

(d) Removing the existing drawers of tables & S/F 20mm gauge thick mild steel sheet drawer complete all as shown in drawing and directed. Note:-(Each drawer shall bemeasured ).

(e) Preparing steel surface of table office officer / clerk/ typist & applying two coats of synthetic enamel paint complete all as shown in drawing and directed.

CHARPOY FOLDING IP WITH PLY TOP (FD-388®) (a M&L for taking out old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick commercial type, grade BWP (minimum size 7’ x 3’)complete all as shown in drawing and directed..

(b) Prepration of MS pipe frame and applying two coat of black synthetic enamel paint over a coat of red oxide primer complete all as shown in drawing and directed.

Dismantling GI Charpoy removing unserviceable parts/accessories i.e long rail, short rail, legs, elbow and checknuts etc and reassembling the same in proper dimension all as directed by Engr-in-charge FD-220 Note:- parts/accessories shall be meassured and paid separately.

Taking out old unserviceable broken ply of charpoy GI supply & fixing with 12mm thick commercial ISI Marked ply wood with 10 Nos of nut and bolt with washer over GI Charpoy all as specified and directed by Engineer-in-Charge.

Taking out old broken existing leg by unscrewing from GI charpoy without damaging the adjacent parts and Fixing leg made out from long rail & short rail (reterived from Item No 2 & 3 here-in-before) duly cut and threaded one top end up to the required length and other one provided with 2mm thick MS round Sheet of size be welded inside the bottom end including S & F 02 Nos FI clamps of size 25 x 3mm to leg and treated with two coats of black paint over a coat of red oxide primer complete all as specified and shown on drawing.

Taking out existing unserviceable/ broken GI check nut from existing charpoy GI pipe and supply and fixing 32mm bore check nut medium grade complete all as specified and shown on drawing .

Taking out existing unserviceable GI elbow from the charpoy GI pipe and supply & fixing new ISI marked 32mm dia , 3 way, GI elbow , medium grade compete all as specified and shown on drawing.

M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a coat of olive green synthetic enamel paint to the following furniture items complete all as per drg:- (a) Almirah steel. large

(b) Almirah Steel Medium

(c) Chair steel tubular with arms.

(d) Chair tubular steel without arms.

(e) Rack Steel 6 tier

(f) Chair in set of three easy

(g) Table office officers steel.

(h) Table clerk steel.

(j) Locker steel.

(k) Rack adj steel shelving size 2275x900x500mm

(l) Rack pigeon hole

(m)Chair steel with hand board

(n) Rack shoes steel

(o) Chair Writing Map

(p) Bed Hard Officer Map

(q) Book case steel large

M/S SHEO KUMAR SINGH AND SONS