REPAIR TO JOINERY AND OTHER MISC B/R WORKS AT AF STN NAJAFGARH AND REPAIR TO WOODEN/STEEL FURNITURE AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge.

S&F 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-Charge.

S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing as per specification complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for anodised aluminium Section (minimum 50 micron powder coating) for doors, windows, ventilators and aluminium grill with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two Nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-Charge.

S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) windows and ventilator shutters, with aluminium grill, side hung type, without sash bars aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engr-in-Charge.

S&F 5.50 mm thick sheet glass ordinary quality exc 0.50 sqm each pane complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made IInd Class Hard wood panelled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-Charge.

M&L for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-in-Charge.

M&L for flush shutter 25 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work or aluminium door, complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 complete all as specified and directed by Engr-in-Charge.

S&F 125 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-Charge.

S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm MS pressed handles, oval type, stove enameled black complete all as specified and directed by Engr-in-Charge.

S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed by Engr-in-Charge.

S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame complete all as specified and directed by Engr-in-Charge.

S&F for floor, door stopper of size (140mm length of cover plate) of aluminium alloy body and tongue, anodized, with hard drawn steel spring complete all as specified and directed by Engr-in-Charge.

S&F (piano) type hinges mild steel bright finish as electrogalvised 30mm width of flaps (with open) complete all as specified and directed by Engr-in-Charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

S&F hydraulic door closer hydraulically regulated aluminium (die cast) body designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc in repairs complete all as specified and directed by Engr-in-Charge.

S&F for steel windows conforming to IS-1038 with side hung shutters including projected type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. Note :- Wire cloth shall be measured and paid for separately.

S&F for steel windows conforming to IS-1038 with side hung shutters including projected type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. Note :- Glass shall be measured and paid for separately.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples in door and steel window complete all as specified and directed by Engr-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples in door and steel window complete all as specified and directed by Engr-in-Charge.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty/steel or rubber beading complete all as specified and directed by Engr-in-Charge.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/steel or rubber beading including Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

S&F 5.50 mm thick sheet glass ordinary quality exc 0.50 sqm each panes including Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-Charge.

Taking down and re-fixing of aluminium door shutter exc 1 sqm but n. exc 2sqm each for necessary repair such as change of 5mm thick glass pane, wire mesh, guard frame and including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc, complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, any thickness incl hooks and ridge as retrieved from site complete all as specified and directed by Engr-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F in repair micro perforated square edge and activate finish mineral fibre (sand micro) of nominal size 595x595x15mm thick, having building attribute, as in false ceiling, fixed on thick and including grid of size 600x600mm having main of aluminium -T of size 35x25x0.7mm thick cross aluminium -T- of size 25x35x0.7mm thick and wall angle of size 25x25x0.7mm thick, the grid shall be suitable for mineral fibre tiles and hanging from soffits of existing RCC roof slab with using connecting clips/levelling clips all as per manufacture instruction and as directed by Engr-in-charge

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Engr-in-Charge.

Sofa set to seat five (FD-281) Taking out the torn out unserviceable cushion set of one seat & one back from Sofa set (FD-281) and supply new foam cushion set made of superior quality cushion of 40 density 100mm thick of size 530x560mm including tapestry cloth cover stiched on all sides with tapestry cloth of approved shade/texture costing not less than Rs 450/- per Sqm complete all as shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable long rail from the sofa set of three seater (FD-281) and S&F of new long rail made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

Taking out the unserviceable short rail from the sofa set three seater (FD-281) S&F of new short rail made out of well seasoned first class hard wood without changing the shape and dimensions complete all as per drg

Taking out the unserviceable legs from sofa set of three seater(FD-281)S&F of new leg made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

Taking out the unserviceable strips from the back of sofa set three seated (FD-281)S&F of new strip made out of well seasoned first class hard wood as per existing shape and size complete all as per drg and directed by Engr-in-Charge.

Bed with plywood top (FD-246) Taking out the unserviceable footrest from the bed with plywood top and S&F new footrest made out of well seasoned teak wood duly covered with decorative type plywood of commercial type 4 mm thick with one side teak face ISI Marked complete all as shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable Headrest from bed with plywood top and S&F new Headrest made out of well seasoned teak wood duly covered with decorative type plywood commercial of 4 mm thick one side teak face complete all as shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable long rail from Bed with plywood top and S&F new long rail made of well seasoned hard wood as per existing shape and size complete all as shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable short rail from Bed with plywood top and S&F new short rail made out of seasoned hard wood as per existing shape and size complete all as shown in drg and directed by Engr-in-Charge.

Taking out the old unserviceable centre Stiffeners from bed plywood top and S&F of new centre stiffeners made out of well seasoned hard wood as per existing shape and size complete all as shown on drg and directed by Engr-in-Charge.

Taking out the unserviceable top plywood from Bed with plywood top and S&F new plywood of commercial type of 12mm thick ISI Marked superior quality as per existing shape and size all as shown on drg and directed by Engr-in-Charge.

Taking out the old unserviceable MS supporting Clamp from the bed with ply top S&F of new clamps made out of 25mmx6mm MS flat iron fitted supporting to long rails all as shown on drg and directed by Engr-in-charge.

Table 900x600x760mm with/without drawer (FD-223, 224 283 & 284) Taking out the unserviceable top from table 900x600mm and S&F new top made out of pre-laminated particle board of one side teak face, exterior grade of 18mm thick duly provided with 4mm thick teak wood beading all round the top complete all as shown on drg and directed by Engr-in-Charge.

Taking out the unserviceable leg from the table 900x600mm and S&F new leg made out of well seasoned teak wood as per existing shape & size including PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing to the repaired table complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from the table 900x600mm without drawers and S&F new long rail made of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable short rail from the table 900x600mm with drawers and S&F new short rail made of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable centre stiffener from the table 900x600mm and S&F new centre stiffener made out of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawers from the table 900x600mm and S&F new drawers made out of 12mm thick teak wood except bottom of drawers shall be of 6mm thick ply wood commercial ISI Marked complete all as shown in drg and directed by Engr-in-Charge.

Taking out old unserviceable knobs from the drawers of table 900x600mm with drawer S&F of new Knobs as per approved quality complete all as shown in drg and directed by Engr-in-Charge.

Teapoy wooden (FD-232,278 & 34) Taking out the unserviceable top from Teapoy wooden and S&F new top made out of pre-laminated particle board of one side teak face exterior grade BWR type of 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from Teapoy wooden and S&F new leg made out of well seasoned teak wood as per existing shape & size complete including PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from the Teapoy wooden and S&F new long rail made out of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out the the unserviceable side rail from Teapoy wooden and S&F new side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Table peg (FD-236 & 277) Taking out unserviceable top from table peg and S&F new top made out of pre-laminated particle board one side teak face exterior grade of BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from the table peg and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from the table peg and S&F new long rail made out of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side rail from the table peg and S&F new side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Table dining 6 persons (FD-239 & 273) Taking out the unserviceable top from table dining 6 persons and S&F new top made of pre-laminated particle board one side teak face exterior grade of BWR type 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from table dining 6 persons and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete including. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from table dining 6 persons and S&F new long rail made out of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side rail from table dining 6 persons and S&F new side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

S&F of new bracket 100mm triangular on two sides shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs set of (08 Nos to each table) all as directed by GE/Engr-in-charge.

Table dining 8 persons (FD-239, 273 & 376) Taking out unserviceable top from table dining 8 persons and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from table dining 8 persons and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete including. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail from table dining 8 persons and S&F new long rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable short rail from table dining 8 persons and S&F new short rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

S&F of new bracket 100mm triangular on two sides shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs set of 08 Nos to each table all as directed by GE/Engr-in-charge.

Table Centre (FD-274) Taking out unserviceable top from table centre and S&F new top made out of pre-laminated particle board one side teak face exterior grade of BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from the table and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable top rail from table and S&F new top rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

S&F of new bracket 50mm triangular on two sides shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs set of (08 Nos to each table) all as directed by GE/Engr-in-charge.

Table writing (FD-249,275 & 33) Taking out unserviceable top from table writing and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable leg from table writing and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete including. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable long rail the from table writing and S&F new long rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable short rail from the table writing and S&F new short rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable centre stiffener from the table writing and S&F new centre stiffener made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side stiffener from the table writing and S&F new side stiffener made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable shutter from the table writing and S&F new shutter made out of pre-laminated particle board of 18mm thick exterior grade BWR one side teak face duly provided with 4mm thick teak wood beading all around the shutter including piano type hinge continuous, knob & 6 lever brass lock with duplicate keys of best quality complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable back plywood from box of table writing and S&F new back plywood made out of 6mm thick plywood commercial exterior grade of BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawers from Table writing and S&F new drawers made out of 12mm thick well seasoned teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR including knob etc complete all as shown in drg and directed by Engr-in-Charge.

Table bed side (FD-276,248 & 28) Taking out unserviceable back plywood from table bed side and S&F new back plywood made out of 6mm thick plywood commercial exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable shelves from table bed side and S&F new shelves made out of 12mm thick prelaminated particle board exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side from table bed side and S&F new side made out of 18mm thick pre-laminated particle board one side teak face exterior grade duly provided with 4mm thick teak wood beading on front side matching with the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable top from table bed side and S&F new top made out of 18mm thick pre-laminated particle board one side teak face exterior grade on front side as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Side board (FD-26 & 241) Taking out unserviceable top from side board and S&F new top made out of 18mm thick block board commercial exterior grade BWR provided with 4mm thick teak wood beading on front side complete as shown on drg and directed by Engr-in-Charge.

Taking out unserviceable back plywood from side board and S&F new back plywood made out of 6mm thick plywood commercial exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable door shutter from side board and S&F new shutter made out of pre-laminated particle board 18mm thick exterior grade duly provided with 4mm thick teak wood beading all around the top as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawers from side board and S&F new drawers made out of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial grade BWR and front which shall be of 18mm thick prelaminated particle board exterior grade duly provided with 4mm thick teak wood beading all around for front part including knob etc. All as shown in drg.

Taking out unserviceable leg from side board and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Table dressing Gents with mirror FD-230 Taking out unserviceable drawers from table dressing gents and S&F new drawers made out of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR ply & front of drawers shall be made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR including knob etc as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable top from the table dressing gents and S&F new top made out of 12mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable bottom from table dressing gents and S&F new bottom made out of 12mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side from table dressing gents and S&F new side made out of 12mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable looking mirror from table dressing gents and S&F new looking mirror of 5.5mm thick, free from distortion and other defect duly framed with back 06 mm thick commercial plywood, teak wood beading & vertical support etc. as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Table dressing ladies with mirror (FD-251, 378 & 32) Taking out unserviceable drawers from table dressing ladies and S&F new drawers made out of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR & front of drawers shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable top from table dressing ladies and S&F new top made out of 18mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable bottom from table dressing ladies and S&F new bottom made out of 18mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side from table dressing ladies and S&F new side made out of 18mm thick pre-laminated particle board one side teak face exterior grade BWR as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable looking mirror from table dressing ladies and S&F new looking mirror of size 5.5mm thick, free from distortion and other defect duly framed with back plywood of 06 mm thick commercial, teak wood beading & vertical support etc. as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable plain glass and S&F new plain glass shutter of 4mm thick alongwith standard aluminum channels having two ‘U’ shaped channel for sliding as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Chair dining (FD-279 & 223) Taking out unserviceable rear leg from chair dining and S&F new rear leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front leg from chair dining and S & F new front leg made out of well seasoned teak wood as per the existing shape & size complete including. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable frontor back or side rail from the chair dining and S & F new front or back or side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable cane from the chair dinning Supply & re-canning with new cane of 2 mm wide half round as per Godrej pattern as per the existing complete all as shown in drg and directed by Engr-in-Charge.

CHAIR DINING MAP/SPL/LONG BACK (FD/MAP-II/04 & TP) Taking out unserviceable rear leg from chair and S&F new rear leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front leg from chair and S&F new front leg made out of well seasoned teak wood as per the existing shape & size and changing PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front or back or side rail from chair and S&F new front or back or side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable cushion seat from chair S&F with new seat made out of 75mm cushion 40 density on 12mm plywood covered with tapestry cloth of approved shade/texture costing not less than Rs 400/- per Sqm All as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable stiffener from chair and S&F new stiffener made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Chair Writing (FD-280 & 250) Taking out unserviceable rear leg from chair writing and S&F new rear leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front leg from chair writing and S&F new front leg made out of well seasoned teak wood as per the existing shape & size complete inculding. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front or back or side rail from chair writing and S&F new front or back or side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable cane from chair writing Supply & re-canning with new cane 2 mm wide half round superior quality as per Godrej pattern as per the existing complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable stiffener from chair writing and S&F new stiffener made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable hand rest from chair writing and S&F new hand rest made out of well seasoned teak wood matching with the existing shape & size.

Chair Easy (FD-229 & 281) Taking out unserviceable rear leg from chair easy and S&F new rear leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable front leg from chair easy and S & F new front leg made out of well seasoned teak wood as per the existing shape & size complete including. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable back rail upper side from chair easy and S&F new back rail upper side made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable back rail lower side from chair easy and S&F new back rail lower side made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable side rail from chair easy and S&F new side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable stiffener from chair easy and S&F new stiffener made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable hand rest from chair easy and S&F new hand rest made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.

Taking out unserviceable cane from chair easy Supply & re-canning with new cane 2 mm wide half round as per Godrej pattern as per the existing complete all as shown in drg and directed by Engr-in-Charge.

M&L for preparation of old polished wooden surfaces duly scrapping the old polish completely with chemical/emery paper & cleaning the old surface. Applying polish to get perfect glossy finish duly applying two or more coats of french polish to three seater Sofa set complete all as specified and directed by Engr-in-Charge.

Description all as per item No 147 above but for Sofa set to seat five (FD-281)

Description all as per item No 147 above but for Bed with plytop

Description all as per item No 147 above but for Table 900x600x760 with/ without drawers

Description all as per item No 147 above but for Teapoy wooden

Description all as per item No 147 above but for Table peg

Description all as per item No 147 above but for Table dining 6 persons

Description all as per item No 147 above but for Table dining 8 persons

Description all as per item No 147 above but for Table Centre

Description all as per item No 147 above but for Table Writing

Description all as per item No 147 above but for Table Bed Side

Description all as per item No 147 above but for Side Board

Description all as per item No 147 above but for Table dressing gents

Description all as per item No 147 above but for Table dressing ladies

Description all as per item No 147 above but for Chair dinning

Description all as per item No 147 above but for Chair writing

Description all as per item No 147 above but for Chair easy

Charpoy GI pipe (FD-220) Taking out unserviceable/ broken long rail from Charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken short rail from Charpoy GI pipe and fixing short rail made out of long rails retrieved out of Srl Item 1 above as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken leg from Charpoy GI pipe and fixing leg made out of short rails retrieved out of Srl Item No 2 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken 3 way elbow from Charpoy GI pipe and S&F new 3 way elbow of 32mm bore ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable/broken GI check nut from Charpoy GI pipe and S&F new check nut of 6mm thick 32mm bore as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable plastic/nylon newar from charpoy GI pipe and S&F Plywood of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with suitable flat headed bolt, nut and washers 08 Nos of suitable size as per requirement including provision of 02 Nos stiffeners made out of 35x6mm flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex. All as specified and directed by Engr-in-Charge.

Taking out unserviceable ply top from charpoy GI pipe and S&F of new Ply of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with flat headed bolt, nut and washers 08 Nos of suitable size as per ground requirement including provision of 02 Nos stiffeners shall be provided made out of 35x6mm Flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex all. All as specified and directed by Engr-in-Charge.

Teapoy Verandah (FD-383, 255 &FD/E6/MAP/17) Taking out unserviceable top from Teapoy verandah and S&F new top made out of MDF board exterior grade both side white shade exterior grade of 18mm thick including 4mm thick teak wood beading all around the top all as per existing shape size complete all as shown in drg and as directed by the Engr-in-Charge.

Taking out unserviceable rubber shoes from the leg Teapoy verandah and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Sofa 3 seater size 1950X760X750 mod Make Geekon Taking out the torn out unserviceable cushion set of one seat & one back from Sofa set and supply new foam cushion set made of superior quality cushion of 90 density 280mm thick of size 1590X1680mm including spring and leatherette cover stiched on all sides with tapestry cloth of approved shade/texture costing not less than Rs 500/- per Sqm complete all as shown in drg and directed by Engr-in-Charge

Table office clerk steel (FD-84 & 1004) Taking out of unserviceable top from Table office clerk steel and S&F new top made out of MDF board of one side teak face, exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawers from the Table office clerk steel and S&F new drawer made out of 1mm thick mild steel sheet throughout as per the existing drawers complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locks from the table office clerk steel and S&F new brass lock of 04 levers with duplicate key complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable rubber shoes from the legs of Table office clerk steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.

Table office Officer steel (FD-84 & 1003) Taking out unserviceable top from the Table office officer steel and S&F new top made out of pre-laminated particle board of one side teak face exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable drawer from Table office officer steel and S&F new drawer made out of 1mm thick MS sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locks from the table office officer steel and S&F new brass lock of of 04 levers with duplicate key complete. All as shown in drg.

Taking out unserviceable rubber shoes from the leg of Table office officer steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Almirah large /Medium steel with shelves (FD-67,1031 &1032) Taking out the unserviceable lock from the Almirah large/ medium steel and S&F new brass lock, six levers godrej pattern with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Almirah large/medium steel and S&F new handle of chromium plated of size 100mm long with 25mm long steel pin, to make 3 way locking system operational, of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable steel clamp from the almirah large/medium steel and S&F new steel clamp including fixing of loose shelves as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah large steel and S&F new 3 way locking device including MS rod 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable locking device from Almirah medium steel and S&F new 3 way locking device including MS rod of 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Chair revolving/computer with or without arm/off size/any type (TP) Taking out unserviceable wheel Base from any type of chair revolving and S&F new wheel base of different types as per trade pattern existing shape & size complete as specified and directed by Engr-in-Charge.

Taking out unserviceable hydraulic assembly from chair revolving and S& F new hydraulic assembly as per trade pattern to make the chair functional as per existing shape and size complete all as specified and directed by Engr-in-Charge..

Taking out unserviceable tapestry cloth foam cushion and plywood from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade of cost not less than 250 per Sqm including replacement of the foam cushion and 12 mm thick plywood etc. as required complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable hand rests from chair revolving and S&F new hand rests (set of 02 Nos for left and right each) as per trade pattern and the existing hand rest complete all specified and directed by Engr-in-Charge..

Book case steel (FD-90 & 1028) Taking out unserviceable lock from Book case steel and S&F new six lever brass lock with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Book case steel and S&F new chormium plated steel handle of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable glass from the Book case steel and S&F new plain glass of 4mm thick of approved quality matching with the existing glass complete all shown in drg and directed by Engr-in-Charge.

Locker bed side steel (FD-257 &1029) Taking out unserviceable hasp & staple from Locker bed side steel and S&F new hasp and staple of size 75x40x4mm of approved quality complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable handle from Locker bed side steel and S&F new chromium plated steel bow handle of 100mm long of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out unserviceable hanging rod from the Locker bed side steel and S&F new chromium plated steel hanging rod of 19mm dia approved quality complete all shown in drg and directed by Engr-in-Charge.

Chair tubular steel with and without arms (FD-75) Taking out the unserviceable seat from chair tubular steel and S&F new seat made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying 2 or more coats of french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable back from the chair tubular steel and S&F new back made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying 2 or more coats or french polish complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable flat iron from the chair tubular steel and S&F new flat iron of size 25x3mm as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hand rests from chair tubular steel and S&F new hand rests (Set of 02 Nos) made out of hard wood shisham of existing size duly applying 2 or more coats or french polish of required shade complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable Caps and rubber shoes from chair tubular steel and S&F new caps & rubber shoes (Set of 02 Nos Caps and 04 Nos rubber shoes) of best quality matching with the existing complete all shown in drg and directed by Engr-in-Charge.

CHAIR VARANDAH Taking out the unserviceable leg from the chair verandah and S&F new leg (front or rear leg) made out of 19mm MS Tube of 1.6 mm wall thickness along with hard rubber shoes at the bottom of legs complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable mild steel round bar from front and back side and S&F new mild steel Bar round of 10 mm dia shall be welded to both front and back side legs of chair Varandah complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable hard rubber shoes from chair verandah and S&F new rubber shoes (Set of 04 Nos) of approved quality in white colour complete all shown in drg and directed by Engr-in-Charge.

Taking out the unserviceable cane from the chair verandah, supply & re-canning with new cane of 4mm wide as per Mat pattern complete all shown in drg and directed by Engr-in-Charge.

M&L for preparation of old painted surfaces by rubbing down with emery paper clean thoroughly to remove all dust/oily spots, dentings etc and applying one coat of synthetic enamel paint of existing shade with mechanical spray gun of all sides and inside with shelves door shutters for Almirah large steel complete all as specified and directed by Engr-in-Charge.

Description all as per item Ser No 206 above but for Almirah medium steel.

Description all as per item Ser No 206 above but for Book case steel.

Description all as per item Ser No 206 above but only exposed external surfaces for Teapoy verandah.

Description all as per item Ser No 206 above but for Table office clerk.

Description all as per item Ser No 206 above but for Table office officer.

Description all as per item Ser No 206 above but for Locker bedside steel.

Description all as per item Ser No 206 above but only exposed external surfaces for Chair tubular steel.

Description all as per item Ser No 206 above but only exposed external surfaces for Chair verandah.

M/S Parshant Associates (BID ID -3332188)