PROVN FOR SERVO AUTO STABILIZER AND SPL REPAIR/REPLACEMENT OF UNSV CONVENTIONAL STREET LIGHT FITTINGS IN TO LED STREET LIGHT AND ADDN/ALTN TO EXT E/M AND EXT WS SERVICES AT VARIOUS LOCATIONS UNDER GE E/M LUCKNOW

Amount

LED street light fitting with mandatory driver set having pressure die cast aluminium body and lenses suitable for 45 watt confirming to IP 66 and IK 07 protection having company LOGO ingraved complete lumes high power LED with lenses Lumen efficacy of LED not less than 100 lumen per watt system,efficency power factor >0.95, THD<10% at Full load CRI> 70%, every life class 50000 hrs at the L70,poted driver set , Phase to phase protection at 415 Volts , over voltage protection,surge voltage protection and other seafty test as per IS 15885 Part-II /Sec 13 and BIS comply ) incl fitting suitable for pole mounting bracket 40 mm. all releven documents related to luminaries and driver needed to submit for approval fixed as in replacment of old unservicable light , complete all as specified and as directed by Engineer-in-Charge.

LED street light fitting with mandatory driver set having pressure die cast aluminium body and lenses suitable for 60 watt confirming to IP 66 and IK 07 protection having company LOGO ingraved complete lumes high power LED with lenses Lumen efficacy of LED not less than 100 lumen per watt system,efficency power factor >0.95, THD<10% at Full load CRI> 70%, every life class 50000 hrs at the L70,poted driver set , Phase to phase protection at 415 Volts , over voltage protection,surge voltage protection and other seafty test as per IS 15885 Part-II /Sec 13 and BIS comply ) incl fitting suitable for pole mounting bracket 40 mm. all releven documents related to luminaries and driver needed to submit for approval fixed as in replacment of old unservicable light , complete all as specified and as directed by Engineer-in-Charge.

LED flood light fitting with mandatory driver set having pressure die cast aluminium body (LM 6 alloy) and lenles suitable for 120 watt in green colour confirming to IP 66 and IK 08 protection having company LOGO ingraved complete in respect with system lumes high power LED with lences>100 LM/watt system,efficency power factor >0.95, THD<10% at Full load CRI> 70%, every life class 50000 hrs at the rate L70,poted driver set , Phase to phase protection , over voltage protection,surge voltage protection and other seafty test as per IS 15885 Part-II /Sec 13 and BIS comply ) all to releven documents related to luminaries and driver needed to submit for approval fixed as in replacment of old unservicable light , complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge. Note: Punned thickness (over all 18 cm) shall be measured & paid.

Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge.

Boring / drilling (Horizontly ) manually under existing road Max 10 M in width suitable for passing GI tubing 40 to 100 mm bore, complete all as specified and as directed by Engineer-in-Charge.

Mild steel galvanized tubes light grade ISI marked 40mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain /floor etc in and including taking down old unservicable G I pipe ,compllete all as specified and as directed by Engineer-in-Charge.

LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers including jointing and testing complete and taking out unserviceable cable , complete all as specified and directed by Engineer-in- Charge. Note : Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per Item No 11 above but 120 sqmm cross sectional area, 3.5 core

All as per Item No 11 above but 10 sqmm cross sectional area, 2 core

All as per Item No 11 above but 25 sqmm cross sectional area, 4 core

All as per Item No 11 above but 50 sqmm cross sectional area, 3.5 core

All as per Item No 11 above but 70 sqmm cross sectional area, 3.5 core

GI brackets made of 32/40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zn chrome primer and fixed to pole / walls etc fixed as in replacment , complete all as specified and as directed by Engineer-in-Charge.

MS Junction Box made of 1.6 mm thick MS sheet of size 300mmx200mmx150mm complete with front openable hinged cover and locking arrangements with 4 Nos aluminium bas bar 100 Amps, mounted on porcelin insulator including M&L for MCB SP 10-1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including duly painted with powder coated paint fixed as in replacment , complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 40mm bore (light grade) all as specified, directed and shown in electrical plate No 5 of SSR Part-I and testing ,including dismanteling of old unserviceable earthing , complete all as specified and as directed by Engineer-in-Charge. Note : (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 1.00 metre away from earth.

Automatic street light switch using Infrared Sensor based NATURE SWITCH for automatic switching of street lights based on LUX level of natural light. Required illuminance for switching ON is < 30 Lux and for switching OFF > 10 Lux level. The sensor (nature switch) alongwith suitable power contactors, Input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR graded SMC junction box conforming to IP-54 degree of ingress three phase 8 KW lightening load capacity fixed as in replacment , complete all as specified and as directed by Engineer-in-Charge.

Dismantling of existing old damage pole PCC & Plain cement concrete 1:3:6 type D-2 using 40 mm graded stone aggregates, as copping of poles complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing 6 Sqmm x3 core nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified & directed by Engr-in-Charge.

Supply & Fixing 10 Sqmm x3 core nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified & directed by Engr-in-Charge.

Preparation of old painted surfaces and painting of LT steel tubular pole 9 mtrs long from bottam to top with aluminium paint and painting to bottam up to 1.5 mtr height from top of PCC coping with sysnthetic enamel paint 2 coats in black and Yellow/white alternate strip including numbering in 8 cm height of number with white paint both paint aluminium /synthetic duly approved ,complete all as specified and as directed by Engineer-in-Charge

S&F servo controlled oil cooled voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy + 2.5% and speed of correction 8 volts per second and of capacity 300 KVA complete all as specified and directed by Engineer-in-Charge.

Supply & laying GI pipe light grade 100 mm bore under road crossing or on poles or wall for protection of cables complete all as specified and directed by Engineer-in-Charge.

M&L for making earthing high conductive, non corosive maintenance free, non fluctuation of ohmic value 80mmX3000mm copper pipe in pipe filled with super conductive crysteline with earth plus 50 kg Earth Plus ULTRA high grade earthing back fill compound including concrete inspectiobn earthing pit chamber with cover, copper strip 25x3 mm which desire complete all accesories for design modification to achieve the earth terminal rod resistance value below 1 ohm complete all as specified and directed by Engineer-in-Charge. Make : Tercell/Earth plus

Supply & fixing for Air termination with Early Streamer Emission (ESE) technology adaptor radious of protection installed at 5 mtr height lighting protection unit shall be semi-sphare in shape with central unit attached with atleast six arc gap of main lighting current. It should be supported on a GI mast/MS material pipe without use of FRP materials. Model & series number should be inscribed on body of LA. 79 mtr radious coverage. Make : EUROSTAR model : ES-60 complete all as specified and directed by Engineer-in-Charge. Note :- (a) Copper conductor cable of 70 sqmm required at site with necessary accessoried deemed to contract rate (b) Chemical earthing-02 Nos required for instrument with necessary accessories deemed to contract rate.

Supply and fixing in repair galvanised iron tube ` light grade' for protection of connection wire at pole/wall and duct/road/trench for 32 mm dia of pipe complete all as specified and as directed by Engineer-in-Charge

Material & labour for boring of holes under road, pavement, hard standing by trenchless technology for laying/passing of LT cables using ultra sounding technique and necessary machine under roads/ hard standing complete all as specified and as directed by Engineer-in-Charge Note:- If any damages to existing services such as OFC cable/ Gas pipe line/ Electric cable etc shall be repaired immideately by the contractor and rate quoted for the same shall be deemed to be included in this item.

Earthing complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to G I earth strip 4 dia G I wire by means of brass bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, pit cover of precast RCC (1:2:4), type B-1, reinforced XPM of weight not less than 4 kg/ Sq.m and MS frame etc. , complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from earth.

Disconnecting electrical connection and dismantling & taking down serviceable LED light fitting with bracket & clamps of any wattage & height from the pole and refixing the same as directed place with new nut,bolt,washer etc complete all as specified and as directed by Engineer-in-Charge

Disconnecting the electrical connection and dismantling of the high mast pole 12m height with light fitting & other connected accessories and refixing the same with new foundation & foundation nut bolts as per manufacturer norms as directed place etc complete all as specified and as directed by Engineer-in-Charge

Disconnecting the electrical connection and dismantling of the street light pole upto height 11 ft including refixing alongwith of foundation work complete all as specified and as directed by Engineer-in-Charge

S&F MS junction Box made of 2.0 mm thick MS sheet of size 450mmx300mmx200mm complete with front openable hinged cover and locking arrangements incl painting with two coat of synthetic enamelled paint over one coat of primer incl fixing of 4 Nos aluminium bas bar 100 Amps cap mounted on porcelin insulator including one MCB SP 6 Amp- 1 No with suitable size din rail for controlling of light fitting in the box incl 3 core cable cord of zize 1.5 sqmm from mcb to light fitting and box fixed to ploe with suitable size F1 clamp nut bolts and washer complete all as specified and as directed by Engineer-in-Charge

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and as directed by Engineer-in-Charge

Disconnecting and dismantling carefully ACSR or AAC conductors from poles including nuts bolts washer complete all as specified and as directed by Engineer-in-Charge

Dismantling insulators any type, any size complete all as specified and as directed by Engineer-in-Charge

Dismantling existing unserviceable LT poles complete all as specified and as directed by Engineer-in-Charge

Shifting of 100 KVA DG set including AMF Pannel board with removing and making electric connection to the proposed site incl pcc foundation as per manufacturer norms on propsed site etc complete all as specified and as directed by Engineer-in-Charge

Shifting of electric panel boards of any type any size with removing and making electric connection to the proposed site incl excavation,pcc works etc complete all as specified and as directed by Engineer-in-Charge

Dismantling stay assembly including isulator and MS clamp complete all as specified and as directed by Engineer-in-Charge

Disconnecting and taking out unserviceaale GI /CI pipe any size from trenches incl excavation, returing filling etc complete all as specified and as directed by Engineer-in-Charge

Disconnecting and taking out unserviceaale cable any size from trenches incl excavation, returing filling etc complete all as specified and as directed by Engineer-in-Charge

Prime power system

Unnati Engineers

Diamond Electric Co.

M K Engineers and Contractors

AUTOMATION AND SWITCHGEAR CONTROL

Avion Industries

Sanjai sales and services