Renovation work for CCMA Government Girls Higher Secondary School at Raja street in Coimbatore City for the establishment of school of excellence in the academic year 2022 2023.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

53.3 : C.I. Steps ( 5 kg)

Electrical arrangements 69 : 15 Amp. Power plug

73.1: Supplyingand fixing of 6 way DB

74 : Charges for fixing of "Fan"

78 :Earthing Station IS 3043 (type I)

ANNEXURE I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x11x70mm (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) with admixture a. In Ground Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand with admixture) 110 mm tk (B.P.) a. In Foundation and basement

b. In Ground Floor

11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x110x70mm (using crushed stone sand with admixture) 70 mm tk (B.P.) a. In Ground floor /stilt floor

b. In First Floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor / stilt floor

b. In First floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

b. In Ground floor / stilt floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

22.3.3 : TW frame & TW styles & rails with BWR double leaf shutters for cup board/ wardrobes including one coat primer & two coats enamel paint.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.6.1 : Providing Acid proof ceramic tile using Grout (Tile Joint Filler)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1.1 :Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).(using crushed stone sand)

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm tk with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

38.7 : Plastic Emulsion PAINT including primer for outerwalls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. A. 110mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1 : Gully Trap using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b.Light point with ceiling rose

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.7 : Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

98.3.1.1: Supply and fixing of best Indian Teak wood Single leaf Panelled door shutter (with brass fittings) a) 1000mm X 2100mm

112.1 : S & F of Exhaust Fan 225mm dia

361 : Concrete Designer Tiles flooring (using crushed stone sand)

379.4.2: S & F of superfine polished with machine cut edges of size 4' x 2' of Granite slab 18 to 20mm thick (using crushed stone sand) (jet black) a.In Ground floor

383.4.1 : Supplying and fixing of Stainless steel sink

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) Removing the damaged Carugated GI sheets in the places shown without affecting the purlins, rafters, joists etc., and stacking for reuse if any at places shown by departmental officers at site

A2) Dismantling the existing damaged RCC concrete with out affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding if necessary, and clearing the dismantled materials away from the site

A3) Dismantling the damaged brick works of Lime mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site

A4) Removing the existing Mangalore tiled roof without reepers and timbers including cost of labour charges

A5) Reroofing with new Mangalore tiled roof using with new country wood reepers of size 50 X 25mm including cost of c.w.reeper nails including cost of labour and materials etc

A6) Renewing the damaged G.I. Sheet with new corrugated G.I. Sheet of 22 Gauge 0.47 mm thick with necessary 'U' or 'J' bolts screws,nails and bitumen washers including cost of labour and materials etc

A7) Removing the damaged Wrought and put up of roof, form the existing structure and stacking the same carefully for reuse if any in the departmental stores at site (including removing the furniture fittings such as hinges, hookes and eyes etc.,)

A8) Renewal of supplying and fixing in position of Countrry Wood Reepers of size 2"X 1" including Loading,Unloading and Conveyance at site etc

A9) Supplying and fixing in position country wood wrought and put up with using new country wood scantling upto 4M length

A10) Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry and racking out joints to 20mm deep without damaging the existing structure and surroundings and clearing the debris away from the site

A11) Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters form the existing structure and stacking the same carefully for reuse

A12) Dismantling the damaged pressed tiles and weathering course

A13) Dismantling the exisitingFloor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs ect.,

A14) Plastering in C.M. 1:5, 20 mm tk. (using crushed stone sand) with plasticizer

A15) Plastering in C.M. 1:3, 20 mm tk. (using crushed stone sand) with plasticizer

A16) Supplying and fixing of HDPE water tank - 1000 litres capacity with ISI mark

A17)Supplying and laying of Raubber moulded Hydraulic Pressed paver block 63mm thick.

A18) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

A19)Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( Modular) (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

A20) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point controlled by 6A Modular switch 1 Way. (Open wiring)

A21) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places controlled by 6A Modular switch 1 Way. (Open wiring)

A22) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring)

A23) Run off 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A24) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A25) Supplying and fixing of Colour bhare Galvilume sheet of 0.47mm thick with necessary steel structure arrangements like purlin, rafters, and GI pipe including cost of material,labour charges for fixing in position with necessary tools and plants ect.,,

A26) White washing two coats

A27) plastic emulsion paint two coats for old walls

A28) applying wall putty one coat

A29) Repairing the existing Doors and windows

A30) Painting two coats for old wood work

A31) Painting two coats for old iron work

A32) varnishing two coats for old wood work

A33) Supply and Laying of Nano polish Virtified tile Flooring with 1st Quality homogeneous tiles in C.M 1:3 20mm Thick incl. pointing with Latricrete or Equivalent make Epoxy Stain Free (SP-100) grout (using Curshed stone sand)

A34) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all required sizes

A35) Supply and fixing of Stainless steel Swan neck tap

A36) Supply and fixing of Squat type urinal

A37) Supply and fixing of Push type tap

A38)Supply and fixing of 9 watts LED bulb

A39) Supply and fixing of 4' 18 Watts LED Tube Light

A40) Supply and fixing of Bulk Head fittings suitable for 12 watts LED bulb

A41) Supply and fixing of 25watts LED Street light

A42) Supply and fixing of 12 watts LED bulb

A43) Supply and delivery of suitable 1HP Open well submersible 30 stage pumset for lifting the water from Sump

A44) supply and delivery of 4 sqmm pvc insulated water proof cable (PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990)

A45) Labour charges for errection of submersible pumpest in bore well/ openwell a) upto 5HP

A46) Supplying and fixing of three phase panel board for 1 hp Submersible pumpset including volmeter ect.

PRS CONSTRUCTIONS