Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.5 LAccepted-AOC A 93 SECTOR 36 GREATER NOIDA GAUTAM BUDDHA NAGAR UTTAR PRADESH 201308 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201308 | 1 | Accepted-AOC Lowest tender | |
| 2 | 2₹34.4 L+₹3.8 L (12.5%)Rejected-AOC 1 OPP NAGAR NIGAM KATNI MAIN ROAD KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | 2 | Rejected-AOC 2nd | |
| 3 | 3₹38.1 L+₹7.5 L (24.5%)Rejected-AOC | 3 | Rejected-AOC 3rd |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
30 Nov 2022, 6:00 pmClosed
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
SPECIAL REPAIR/REPLACEMENT OF OLD WATER PIPELINES AND PROVN OF AUTOMATIC METER READING (AMR) WITH RF TECHNOLOGY AT 7BRD UNDER GE (AF) TUGHLAKABAD
2022_MES_553711_1
GE/TKD-47/2022-23
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹49,000
Yes
7 Mar 2023
2 Nov 2022
2 Dec 2022
9 Nov 2022
30 Nov 2022
16 Nov 2022
Amount
Taking up U/S CI water main (including all fitting) with spigot & socket MS/GI pipe or any other type of pipe or lead joint including burning out joint & recovering lead from pipe of 100mm bore complete all as specified and directed by Engr-in-charge.
M&L for DI pipes of size 100mm bore with spigot and socket end centrifugally cast class "K- 7", in any length laid in trenches/ on surface/over masonry pillar and connection to old or new position complete all as specified and directed by Engr-in-charge. Note: Di fitting Mead joint/ Tyton joint will be measured and paid separately all the dismantled/ demolished taking down material shall be reused or removed from site. Make- Kejriwal casting/ Kesoram/electro steel.
M&L for DI bend any type radius and angle tapers any type straight bend increasing/decreasing or double socket etc) tee pipe single branch by junction double branch cross(all socket and spigot collars caps and plug for the pipe socket & spigot of the following size of 100 mm dia complete all as specified and directed by Engr-in-charge. Note: lead /gasket for fitting shall be measured and paid separately.
Taking up unserviceable GI water pipe line (incl all fitting) size upto 100mm bore complete all as specified and directed by Engr-in-charge.
Supply and laying of galvanised steel water tubing medium grade in trenches/wall /floor with all fittings, connections as required at site of size 20 mm bore complete all as specified and directed by Engr-in-charge. Make: Tata/Jindal
All as per Item No 05 Above but Bore of pipe 25 mm complete all as specified and directed by Engr-in-charge.
All as per Item No 05 Above but Bore of pipe 50 mm complete all as specified and directed by Engr-in-charge.
All as per Item No 05 Above but Bore of pipe 80 mm complete all as specified and directed by Engr-in-charge.
All as per Item No 05 Above but Bore of pipe 100 mm complete all as specified and directed by Engr-in-charge.
S&F in replacement of Cast iron sluice valve of size 80 mm dia Stainless steel stem PN-1.6 (Flanged) conforming to IS 14846 hand wheel operated complete all as specified and directed by Engr-in-charge. Make-Zoloto /Kirloskar/Kartar
S&F in replacement of Cast iron sluice valve of size 100 mm dia Stainless steel stem PN-1.6 (Flanged) conforming to IS 14846 hand wheel operated complete all as specified and directed by Engr-in-charge. Make-Zoloto /Kirloskar/Kartar
M&L in replacement for construction of valve chambers with MS cover 3 mm thick of valve pit of size 1200x1200x1200 MM(internal dimensions) including necessary excavation, earth work 150 mm thick PCC (1:4:8) Type D2 as in foundation, PCC (1:2:4) Type B1 in coping plastering 15 mm thick in cm (1:4), and angle iron frame 50x50x06 mm and locking arrangement including painting with coat of synthetic enameled paint over a coat of red oxide primer after preparation of surface complete all as specified and directed by Engr-in-charge.
Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil including trimming sides and bottom of trenches complete all as specified and directed by Engr-in-charge.
Return filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed by Engr-in-charge.
Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
Boring of holes under road, pavement, Hard standing by trenchless technology using ultra sounding technique and necessary machine including GI pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by Engr-in-charge.
S&F in replacement of Stop valve or Globe valve gun metal valve with both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed by Engr-in-charge. Make- Zoloto, Saint, Kartar
All as per Item No 17 Above but Bore of pipe 25mm complete all as specified and directed by Engr-in-charge.
All as per Item No 17 Above but Bore of pipe 50mm complete all as specified and directed by Engr-in-charge.
Taking down of old Single/Three phase Energy Meter from the Shops/houses yards and deposited to MES complete all as specified and directed by Engr-in-charge.
Supply installation Testing and commissioning of Microprocessor based single phase tamper proof electronic static prepaid cum postpaid energy meter rating 240 Volt, 50 Hz of range 10-60 Amps, complying to IS-16444 with LED display and parameters like Voltage, Current, Frequency Power, Power factor, KWh/KVA, default fin built dual source inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulator and also compatible for Prepaid and Postpaid online energy monitoring billing system, with disconnection reconnection through remote software/data export to ERP complete all as specified and directed by Engr-in-charge by MES with 2 Years warranty. Make Elmeasure Model: PE5121. Taking down energy meter fixed in panels of any capacity any type after carefully disconnecting electrical connections all as specified and as directed by MES-in-Charge Note: Quoted rate shall have deemed to be inclusive of following parameters – (a) Meter reading record shall be submitted before and after replacement duly signed by the contractor rep and MES rep (b) Old meters should be handed over to MES store (c) Any rejoining of wires /cables shall be done using suitable ferrule /cable connectors after removal of meter (d) The cost of making good disturbed surfaces & matching to the existing surface is deemed to be included in the unit quoted rates
Supply, installation, testing and commissioning of outdoor LoRa accumulator for long range communication up to 1 KM suitable for communicating with prepaid come postpaid meter with LoRa communication protocol and the data transfer to the existing Elnet V5 Software complete all as specified and directed by Engr-in-charge. Note: The cost of pole/fixing/mounting arrangmeent on which the accumulator to be installed and SMPS power supply with power backup for minimum up to 2 Hrs is deemed to be included in the unit quoted rates. Make: Elmeasure model: ELMNW
Supply fixing testing & commissioning of configuration of Cloud Hosted multi user web based software with following modules for 3 Years:- (i) Meter data management Modules: The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The billing system would support offline meter data entry the meter data management system would capture and provide the following data. (ii) Mobile Application for all MES Users: (a) 30min instantaneous data from all the meters for seven parameters - cumulative energy Power Current Voltage, Power factor and frequency (b) Monthly and quarterly billing survey data for cumulative energy and max demand (iii) Billing Module: The billing module would collect the data from the meter data management module, calculate billing determinant and make energy data/billing data available to admin and end user. (iv) Occupation and Vacation module: The system would support occupation/vacation based on the unit categories. The system would support automatic data capture on occupation and vacation events. (v) Customer Module The system would include a customer portal for the resident/occupants to log in and view their own energy/billing data.
(vi) Energy Accounting module: The system would include features of energy accounting, the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available. (vii) Communication Module. The system would provide communication of energy data and bills via print email and SMS methods. (viii) Meter Master Data: The system would support meter days repository The system would support meter replacement process. (ix) Excel Export: The system would support export of metering and billing data in excel format. Make Elmeasure. Model: Elnet
M&L for Hosting, GPRS charges for 2 years warranty period Make Airtel/JIO/Vodafone
Neeraj Enterprises
M/S Delhi Engineering Co.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .