Special Maintenance Repair work at 76 TNGRHS flats

Amount

Painting the old ceiling one coat with cement paint of best approved quality including thorough scrapping the existing old surface, including cost of paint, brushes, scaffolding and labour charges for painting etc., complete in all respects with relevent standard specifications and as directed by departmental officers.

Painting the old wall with two coats of I-class plastic emulsion paint of best approved quality and colour incuding cost of paint, brushes, primer, scaffolding, thorough scrapping the old surface etc., compete in all respects with relevant standard specification and as directed by departmental officers.

Painting old wood work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers.

Painting old iron work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers.

Removing the following broken electrical materials and refixing the following materials of good quality Anchor make Dyna white with the ISI mark inlcuidng connection , testing and commissioning etc. all complete and as directed by departmental officers.

16 amps switch with universal socket and indicator (Combined set)

6Amps switch 4 Nos & 1 No socket only ( Combined)

6Amps switch 2nos (Combined set)

6Amps switch 1no,socket 1no with indicator (combined set)

Fan regulator - Stepped electronic square type

Hylem sheet

Ceiling fan capacitor

Gong Bell 9'' suitable for 250v

6Amps switch 1no (Combined set)

16Amps switch with indicator (Combined Set)

Supplying and fixing of 32 Amps TPN metal clad with re-wirable fuse units of best and approved make including cost of materials and labour charges for fixing of old materials etc., all complete and as directed by departmental officers.

Removing the corroded unworkable CP fittings from its position and refixing new metro brand CP fitting with CP flange of best approved quality including cost of scrap value of old materials labour charges for removing and refixing etc. all complete and as directed by the departmental officers.

CP long body - Bib cock with omega handle 15mm dia with CP flange

EWC - PVC double flapped Seat cover

EWC Closet with 'P' or 'S' trap

Health faucet with 1.5m tube connection

Over head Shower 9" arm with flange

PVC waste pipe 1m length

Aluminium Braket

CP waste Coupling 20mm dia

PVC Connection Hose

PVC flushing tank 10lit. Capacity

CP angle cock with CP flange

CP Two way angle cock with CP flange

CP Pilller cock with CP flange

Wash basin 550x400mm

Supplying and fixing of shell type mirror 5.5mm thick of size 600mm X 450mm with PVC frame alround and hard board of back side including cost of materials and labour charges etc,all complete and as directed by the departmental officers.

Supplying and fixing of CP towel rod 75mm long fancy type including cost of towel rod and labour charges for fixing etc all complete and as directed by the departmental officers.

Providing and fixing magnetic door catcher best quality including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers.

Removing the damaged unworkable entrance door lock from its position and refixing new mortise lock, brass Décor type 6 levers lock with keys including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers. (The brand shall be got approved by the EE & Ad.O before supply)

Providing new brass door stopper of heavy type for replacing the existing damaged door stopper including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers

Labour charges for Dismantling the damaged plastering in the walls and packing the joints with cement morter mixed with bonding agent and finished the surface with good cement neatly etc all complete and as directed by the departmental officer

Removing the beyond repair condition ceiling fan for position and refixing new crompton Greaves 48" sweep ceiling fan (1200mm) without regulator of good quality including cost of all new materials and labour charges for removing and refixing and scrap value of old material etc. complete and as directed by the departmental officers.

Supplying and fixing of Tubelight (LED) of best and approved make with necessary teak wood round block of 75mm dia 40mm deep on walls/ceiling including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

Removing and Refixing Service door frames and shutters for making good movement of shutter for closing and opening position by engaging carpenter including cost of hire charges for plaining materials and labour charges etc. all complete and as directed by the departmental officers.

Run off mains 4 wires of 4 Sqm.mm copper insulated single core multi strand fire retardent 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 continous earth by means of 2.5SQ.mm copper PVC insulated unsheathed single core multi starnd fire retardant 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 in fully concealed 19mm/20mm dia rigid PVC connduit pipe heavy duty complete and as directed by the departmental officers

Providing additional19mm thick BWR grade plywood plank for ward robe cupboard with lipping alround painting the same with two coats of synthetic enamel paint of best approved quality including cost of all materials ,labour for fixing,painting etc., complete with standard specification and as directed by the departmental officers.

Supply and fixing Stainless steel 1" pipe Heavy duty with 2no of S.S Clamp cost of materials,labour charges and necessary screws etc.,all complete and as directed by the departmental officers.

Servicing the existing PVC door of replacing the aldrops-1nos,Al.butt hinges,PVC synthetic solution for refixing the PVC door portion etc including cost of materials and labour charges for removing and refixing etc. all complete and as directed by the departmental officers

Solid Panel PVC door without frame shutter of size (1X0.66X2.05m) using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.etc. complete and as directed by the departmental officers.The materials should be got approved by the EE&ADO before use

supplying and fixing of 19mm plywood BWR grade BOX TYPE cupboard with necessary beading,lamination sheet ,Italian hinges,ornamental handle,brass lock,fevicol, etc., all complete and as directed by the departmental officers.CUPBOARD SIZE-0.70mx0.70m

Supplying and fixing Ornamental Glass Selves (0.50mx0.15m) (straight) with stailess steel beading ,handle of best quality including cost of materials and labour charges etc., all complete.

Supplying fabricating and fixing of mild steel grills for enterance door with double leaf approved design including cost of materials,priming coat and labour charges for chipping ,dismantling concrete arches and charges for fixing the M.S grill etc., all complete and as directed by departmental officers

Supplying and fixing in position of Aluminium Grill window of 10mm thick of standard pattern (diamond shape) including "F" and "H" section using Aluminium rectangular section of size 63.50 x 38.10 x 1.28mm @ 0.759kg/m for alround and intermediate vertical frame with necessary Aluminium clips, rubber beedings etc., including dismantling masonry with power drill to the extent required and made good to the original conditions after fixing as directed by the depatmental officers. The aluminium surface is to be anodised with matt finish under electrically controlled condition in accordace with ISI specification 1868/1962 of anodic filim thickness of less than 15 micron for all sections etc., complete

Providng Sliding cupboard with Country Wood scantlings of size 3" x 1 1/2" alround and for verticals,water proof 19mm thick BWR plywood for door shutters and finishing the Both side with lamination sheet (Sunmica) including cost of labour ,materials and painting etc., complete with standard specification and as directed by the departmental officers.

Providing Pest Control treatment to inside of the flats at floor, wood works,windows and doors by means of post construction method that is drilling at the wall floor joint at required intervals and injecting proper soil toxicant emulsion with dilution in to the drills and closing the holes with white cement, spraying chemical formulation on the all windows, doors, switch boxes and all wood works etc. including cost of all matrerials and instruments required such as driller, injector etc, and labour charges for all and as directed by the departmental officers.

Sub Total

Sabari Designs