PROVN OF INDEPENDENT METRO PIPE LINE FROM CAMP NO. 1 TO NEW IB AREA SUMP, RENEWAL OF WEATHER PROOF PAINTING TO EXTERNAL SURFACE OF KENDRIYA VIDYALAYA AT ISLAND GROUND AND OTHER SANCTIONED WORKS UNDER GE CHENNAI

Amount

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and directed.

BLANK

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and as directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, laying cables/ pipes or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Excavation in trenches in hard/ dense soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Excavation in trenches in hard standing/ road cutting n. exc. 1.50m in depth for repairs/ laying of CI/ GI/ DI/ HDPE pipe line and getting out complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated soil to a distance exc. 50m but n. exc. 250m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete, sub base of floors etc. complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in mass concrete in making good to damaged portion of road/ hard standing complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed plates, pintle blocks, anchorage blocks, posts, boundary pillars etc. complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting windows into door openings, etc., or cutting out defective brickwork for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc. to store and rubbish not exc. 50m complete all as specified and directed.

M&L forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to mach existing work, complete, cement mortar (1:6) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet wood grain printed PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixed to frame at site complete all as specified, directed and shown in sketch relevant to item No. 8080 in SSR Part-II.

S&F 1.00mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames), chullah hood, water tanks, water troughs, ducts, urinal troughs and funnels etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F powder coated aluminium partition of 50mm x 50mm x 1mm thick with 12mm thick exterior grade pre-laminated particle board with decorative laminates on both sides fixed with sash bars, aluminium anodised snap beads, screws and aluminium partition doors shall be fixed alongwith partition wall on same section but partly glazed with 5mm thick glass fixed with glazing clips etc. complete all as specified and directed. Note: The unit rate quoted shall be inclusive of all builder's hardware such as hinges, bow handles etc. complete.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified.

M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floor finished fair and even complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but n. exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L glazed coloured ceramic tiles of size 300mm x 200mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L 55mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floor finished fair and even complete all as specified and directed.

M&L 100mm thick cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in sub floor finished fair and even complete all as specified and directed.

M&L 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and smooth using extra cement complete all as specified and directed.

M&L forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection/ foot path etc. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for chequered cement concrete coloured tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry and pointed with white cement and no pigment as in floors laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc. including racking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution on external surface of walls and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian Paints) over and including a coat of white primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian Paints) over a coat of white primer complete all as specified and directed.

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over a coat of alkali-resistant priming paint over and including a coat of 3mm thick wall care putty on wall surfaces complete all as specified and directed.

Cutting down vegetation growths like plants/ trees of girth n. exc. 15cm from roof tops/ parapet walls, external walls of buildings, chajjas, wall junctions at junctions of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/ slab surfaces and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:2:4) type B-1 or in cement mortar (1:2) or brick work in cement mortar (1:4) and plastering with cement mortar (1:4) and treating the surfaces to match with the adjoining surfaces complete all as specified and as directed.

M&L chipping off loose concrete, broken plastering in chajjas, ceiling, fins and fascia carefully and applying one coat of rust remover using DR FIXIT rust remover and one coat of DR FIXIT PIDICRETE concrete MPB bonding agent mixed with mortar as per manufacturer’s instructions and rendering 20mm thick in cement mortar (1:4) in two coats of 10mm each coat including three coats of white wash after preparation of surface complete upto the height of 10.00m above GL all as specified and directed.

S&F vitreous china wash basin white flat back size 550mm x 400mm (excluding taps, waste, chain and plug and porcelain stopper) but including brackets and 32mm dia PVC coupling complete all as specified and directed.

S&F in repairs vitreous china wash down water closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making connection to soil pipes and flushing cistern complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed.

S&F plastic water closet seat cover, white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F 15mm PVC connection 600mm long with PTMT nuts of superior quality all as specified and directed.

S&F in repairs bib tap brass chromium plated with crutch or butter fly handle screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm dia bib tap brass chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and complete all as specified and directed.

S&F in repair PTMT pillar tap standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 120gms) complete all as specified and directed.

S&F in repairs fancy type pillar tap cast copper alloy with capstan heads chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs brass stop valve, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and directed.

S&F stainless steel 1mm thick kitchen or laboratory sink with draining board of grade 304 with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203mm and bowl size 405mm x 354mm x 203mm complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 110mm dia of outlet complete all as specified and directed.

S&F 20mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 25mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 40mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in replacement 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 25mm bore ball brass valve, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F galvanized steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanized steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up/ down existing tubing complete all as specified and directed.

S&F galvanized steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up/ down existing tubing complete all as specified and directed.

S&F galvanized steel water tubing 40mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., including taking up/ down existing tubing complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains upto 150mm dia and making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate smooth finished & reforming benching as required complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 110mm dia PVC (SWR) pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for PVC (SWR) pipes of 110mm dia., single socketed in any length with rubber joints, laid in trenches and set in solvent complete all as specified and directed.

Supply, laying, jointing and testing 80mm bore galvanized steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. laid in trenches, fixed to walls and ceiling or laid in floors etc. complete all as specified and directed.

Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with stainless steel spindle, iron hand wheel & cap suitable for 80mm bore pipe with flanged ends, any pattern including nuts, bolts, rubber gasket, wheel etc. complete all as specified and directed.

Supply & fixing CI non return valve sluice valve 80mm bore with flanged and drilled PN 1.6 conforming to IS 14846-2000 with flanged ends with nuts, bolts, rubber gasket, wheel etc. complete all as specified and directed.

Supply, fixing and testing magnetically coupled water meter, double jet flange type of size 80mm bore complete all as specified and directed.

Supply, installation, testing and commissioning and testing 7.5 HP non clog vertical submersible pump electric driven, 415 volts, 3 phase capable of pumping 600 LPM at 40 metre head for 80mm with chrome steel impeller and cutter suitable to pass 40mm size particles including supply, installation with guide rails and lifting chain, cables, earthing etc. complete all as specified and directed.

Supply, laying, connecting up and testing XLPE insulated armoured LT UG electric cable with aluminium conductor 1100 V grade of size 16 sqmm 4 core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

M&L construction of brick masonry valve pit chamber of inner dimension 750mm x 750mm x 750mm suitable for valves upto 100mm size including 150mm thick PCC (1:4:8) type D-2 for foundation, brick work in cement mortar (1:6), 15mm thick internal rendering in cement mortar (1:4) mixed with water proofing compound, 50mm thick coping in PCC (1:2:4) type B-1, including necessary excavation and earth work including provision of MS sheet cover of thickness not less than 3.00mm on 40mm x 40mm x 6.0mm angle iron frame with locking arrangement, including painting MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repairs towel rail 600mm long between flanges, brass chromium plated fixed with brass screws as per Cat No. 1111NM of Jaquar or Cat No. BA-40 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. CON-021 of Jaquar or Cat No. 8304 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule as per Cat No. CON-037KN of Jaquar or Cat No. 8306 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated two way angle stop cock with flange, screwed down, high pressure with crutch or butterfly handle, fancy type with long shank screwed both ends for iron pipe or for union as per Cat No. 1121BN of Jaquar or Cat No. 8311 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated angle cock with flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as per Cat No. CON-053KN of Jaquar or Cat No. 8310 of Prayag complete all as specified and directed.

S&F in repairs chromium plated tumbler holder as per Cat No. CAN-1141N of Jaquar or Cat No. BA-26 of Prayag complete all as specified and directed.

S&F in repairs brass chromium plated towel ring as per Cat No. 1121BN of Jaquar or Cat No. BA-11 of Prayag complete all as specified and directed.

S&F in repairs overhead shower 100mm dia round shape multi flow (ABS body chromium plated with grey face plate) with rubit cleaning system fitted with and including shower arm as per Cat No. OHS-1999 (shower) and SHA-477 (Arm) of Jaquar or Cat No. BOS-11 (shower) and BOS-47 (Arm) of Prayag complete all as specified and directed.

S&F in repairs hand shower 105mm dia round shape single flow with air effect (ABS body and chromium plated face plate) with rubit cleaning system fitted with and including 1.5m long chromium plated flexible pipe and premium wall bracket as per Cat No. HSH-1717 (shower), SHA-555 (flexible pipe) and SHA-571 (wall bracket) of Jaquar or Cat No. BHS-96 of Prayag complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer valve 3-in-1, fancy type with provision of hand shower and overhead shower both complete with 115mm long bend pipe, connecting legs and wall flange as per cat No. CON-267KN of Jaquar or 9980 of Prayag complete all as specified and directed.

S&F in repairs health faucet (hand shower) with 1.2metre long flexible tube with wall hook, chromium plated as per Cat No. ALD-563 of Jaquar or Cat No. BEA-85 of Prayag complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PVC nuts of superior quality complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap recessed type chromium plated as per cat No. ACN-1153S of Jaquar or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or Cat No. BA-25G of Prayag complete all as specified and directed.

S&F in repairs corner glass shelf 300mm (with ABS brackets) matt finished chromium plated (MCH/ colour CP) with bracket end fittings as per Cat No. ACN-1173 of Jaquar or Cat No. BEA-46 of Prayag complete all as specified and directed.

S&F in repairs glass shelf 600mm long as per Cat No. ACN-1171N of Jaquar or Cat No. BEA-51 of Prayag complete all as specified and directed.

S&F in repairs CP bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes and wall flange as per Cat No. ALD-769L300 x 190 of Jaquar or Cat No. BEA-26 of Prayag complete all as specified and directed.

S&F 32/ 40mm dia 750mm long PVC flexible waste pipe for sink/ wash hand basin all as specified and directed.

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc, including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

M&L for point wiring complete with 4.0sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provision of 4.0sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

S&F switch socket combination flush type, 3 pin 15 Amps and 3 pin 5 Amps, 230 volts, 5 in 1, multipurpose, universal type complete all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

S&F switch socket combination, 2 in 1, 5 Amps, 230 volts flush type all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

S&F exhaust fan 450mm sweep, AC single phase 230/ 240 volts, with louvers, heavy duty corrosion resistant body, rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 including cutting opening through brick wall with necessary wood work, plastering and painting to match with the existing surface complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300mm sweep with louver including cutting opening through brick wall with necessary wood work, plastering and painting to match with the existing surface complete all as specified and directed.

M&L taking down ceiling fan of any size, replacing ball bearings, capacitors etc. and spray painting using synthetic enamel paint after filling cavities with filler coat and hanging the fan in existing location complete all as specified and directed.

S&F 20 watts LED light fitting basic all purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver fixed on wall or ceiling surface including taking down existing fitting complete all as specified and as directed. Make: Havells cat No. LUMILINEPLUSBS20WLED865SPCSS or equivalent from Crompton Greaves/ C&S/ HPL.

S&F in repairs 34 watts environment friendly, new generation, aesthetically, ultra modern designed recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong/ Grid ceiling fixed to ceiling complete all as specified and as directed. Make: Havells cat No. PLUTONEO2X2PLR34WLED840S or equivalent from other makes specified in Particular Specifications.

Supply, fixing, connecting and testing factory made MCB distribution board made of 1.2mm thick CRCA sheet, powder coated conforming of IS – 13032, double door flush type fixed in switch boards/ wall at various places of capacity 240 Volts, 8 way, (MCB DB), SPN with 200 Amps rated bus bar neutral link, earth bar and din rail etc. conforming to IP 38 protection including taking down the existing distribution board complete all as specified and as directed. Note: MCB’s shall be measured and paid separately.

Supply, fix, connecting and testing MCB isolator four pole, 63 Amps including taking down the existing MCB complete all as specified and as directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type all as specified and directed.

S&F 20 watts environment friendly, new generation, LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 including provision of two single core 4 sqmm copper conductor PVC insulated cable not less than 8 metre long connecting from junction box of poles including taking down existing fitting complete all as specified and as directed. Make: Havells cat No. ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent from other makes specified in Particular Specifications.

S&F on pole/ wall GI pipe bracket for single light made out of 40mm bore medium grade GI pipe 2.00m long bent to shape and fixed on pole/ wall with 2 No. MS clamps made out 25 x 3mm flat Iron including bolts, nuts and washers etc., complete all as specified and as directed.

S&F post top, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED’s as light source with IP65 protection including taking down existing fitting complete all as specified and as directed. Make: Havells cat No. CORALPT25WLED757PSYMTOPC or equivalent from other makes specified in Particular Specifications.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 20mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 4.0sqmm multi-stranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

All as per item No. 117.00 above but fixed in replacement of existing submain wiring.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15mm bore light grade connected upto switch board including 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No. 3 of MES Schedule Part-I including dearth chamber of PCC (1:2:4) type B-1 using 20mm grade aggregate with 40mm thick RCC cover slab (1:1½:3) type A-0 using 12.5mm graded stone aggregate reinforced with 8mm dia TMT bars @ 100mm c/c both ways and 6mm dia MS lifting hooks including testing on completion including dismantling existing earthing complete all as specified and as directed.

Demolition of PCC in any situation n. exc. 15cm thick including removal of debries outside MD land complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons and removing rubbish to outside MD land complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge and thickness including Nainital or similar pattern roof covering all as specified and directed.

M/s.Jayam Constructions

SIRITEL SYSTEMS PRIVATE LIMITED