C/o State Implementation Centre SIC Urban Development at New Bus Stand Hamirpur Basement-III

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (Two millimetre) (± 0.2 mm) , corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm (Nineteen into nineteen millimetre) and 1mm (One millimetre) (± 0.1 mm) wall thickness and 3 nos. (Three numbers) stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. Extruded section profile size 48x40 mm (Forty eight into forty millimetre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

30 mm (Thirty millimetre) thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm (Sixty into thirty millimetre) and wall thickness 2 mm (Two millimetre) (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm (Seventy five into two hundred twenty millimetre) having wall thickness 1.0 mm (One millimetre) and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (One millimetre) (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm (One hundred into thirty millimetre) and 2 mm (Two millimetre) (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (One millimetre) (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

15 mm ( fifteen millimetre) cement plaster on rough/fair side of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria-Eternity/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades,in skirting, riser of steps laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required comple including grouting the joints with white cement and matching pigments etc., complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Galvanised iron clip in Metal ceiling system of 600x600mm (six hundred into six hundred) millimetres module which includes providing and fixing C. wall angle of size 20x30x20mm (twenty into thirty into twenty) millimetres made of 0.5mm (zero point five) millimetres thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm (three hundred) millimetre centre to centre suspending the main C carrier of size 10x38x10mm(ten into thirty eight into ten) millimetres made of galvanised iron steel 0.7mm (zero point seven) millimetre thick from the soffit cleat 37x27x1.6mm(thirty seven into twenty seven intoone point six ) millimetre rawl plugs of size 38x12mm(thirty eight into twelve) millimetre and C carrier suspension clip and main carrier bracket at 1000mm (one thousand) millimetre centre to centre inverted triangle shaped spring tee having height of 24mm(twenty four) millimetre and width of 34mm( thirty four) millimetre made of galvanised iron steel 0.45 (zero point four five) millimetre thick is then fixed to the main C carrier and in direction prependicular to it at 600mm (six hundred) millimetre centres with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connections have to be used. All sections to be galvanised @ 120 gms/sqm ( one hundred twenty gramme per squaremetre) (both side inclusive) fixing with clip in tiles into spring T with including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 18 mm (Eighteen millimetre) thick Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye colour) in flooring,steps with three grooves (Single Slab), risers Single slab), kitchen shelves in required design and patterns, in linear as well as curvilinear portions of the building all complete including nozing and moulding as per the architectural drawings with over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with 1st (First) quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre (Fifty grams per litre) of approved brand and manufacture to give an even shade Old work (one or more coats) (Asian/Nerolac/ICI Dulux) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 600x600mm (Six hundred into six hundred millimetre) thick Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make (Somany/ Khazaria/ Nitco/ Rak make) in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point three kilogramme per square metre), including pointing in white cement mixed with pigment of matching shade complete. including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses, purlins, rafters, railings and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Apollo/Jai Bharat/Tata) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m (One point five zero metre) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (One point six zero ± zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg(Forty kilogramme)), G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% (Five percent) tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm (One hundred sixteen into forty five millimetre) & sash 46 x 62 mm (Forty six into sixty two millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two point three ± Zero point two millimetre) and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm (One point seven five square metre) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) thick toughened glass glazing in doors, windows, ventilators shutters and partitions etcetera with angle etcetera PVC/neoprene gasket etcetera complete as per the architectural drawings and the direction of Engineer-In-Charge (cost of glazing, snap beading shall be paid in basic item) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing fly proof galvanized M.S. wire gauge (Horse fly make or its equivalent) designation 140G (One hundred forty G) with wire of dia 0.71mm (Zero point seven one millimetres) to windows and clerestory windows including 60x20mm beading rubber (Sixty into twenty millimetres) or screws upto all heights including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type Universal Hydraulic Door Closer (having brand logo with ISI, IS : 3564, embossed on the body) for door weight upto 35 kg (Thirty five kilogramme) and door width upto 700 mm (Seven hundred millimetre), with necessary accessories and screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (One point six zero ± zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm (Forty seven into fifty millimetre) & mullion 47 x 68 mm (Forty seven into sixty eight millimetre) both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm (zero point seven five square metre) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/ NEROLAC/ ICI-DULUX ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMA of required shade on old work (One or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 kg/sqm (at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat (Jaquar make) and lid, 10 litre (Ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) W.C. pan with ISI marked white solid plastic soft closing seat and lid , conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin under table with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Cera/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous China bowl pattern urinal pot of size 355x440x535mm (Three hundred fifty five into four hundred forty into five hundred thirty five millimetre) including connection the urinal with waste pipe by means of white lead mixed with choppe hemp (weste pipe to bemeasured and paid for separately of Jaquar make flat back type of size 430mm x 260mm (Four hundred thirty into two hundred sixty millimetre) (Item Code URS-WHT-13261PN) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated Spreaded for urinal pot of Jaquar make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish (ACN 1131N) with CP brass brackets fixed to wooden cleats with CP brass screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (Six hundred millimetre) long towel rail with total length of 645 mm (Six hundred forty five), width 78 mm (Seventy eight millimetre) and effective height of 88 mm (Eighty eight millimetre), weighing not less than 190 gms (One hundred ninety grams) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality of ESSCO (ALE-547) and make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware conforming to IS standards and weighing not less than 810 gms (Eight hundred ten grams) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock (concealed) of Jaquar (OPP-CHR-15053 PM) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass bib cock of Short body Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) dia CP brass waste make of Jaquar/Cera for wash basin or sink complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal size, square with 100mm (One hundred millimetre) dia inner hinged round grating (circular type) chromium plated grating of approved quality and colour including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Grab bar of stainless steel 450mm (Four hundred fifty millimetre) long (Superior heavy type) fixed with wooden plugs of Jaquar (Continental Series) or its equivalent of Jaquare make (Item Code AHS 1507) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal size Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) nominal size Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal size PVC door tee ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC door tee ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetres) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x75mm ( One hundered ten into seventy five millimetres) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal ( Hisar) / TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal ( Hisar) / TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 510x1040mm (five hundred ten into one thousand forty millimetre) bowl depth 250mm (Two hundred fifty millimetre) Stainless Steel AISI 304 (8/18) Kitchen Sink with Drain Board of Diamond ( REK 4520 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 150mm ( one hundred fifty millimetre) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed, within all leads and lifts for Pipes, cables etcetera exceeding 80 mm (eighty millimetre) dia. but not exceeding 300 mm (three hundred millimetre) dia including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 100mm (one hundred millimetre) dia cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Please Enable Macros to View BoQ information