Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹34.4 L+₹2.3 L (7.31%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than L1 bidder | |
| 3 | L3₹35.7 L+₹3.7 L (11.4%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than L1 bidder | |
| 4 | L4₹35.9 L+₹3.9 L (12.0%)Rejected-Finance 184 TENGPUNA PULWAMA PULWAMA PULWAMA JAMMU KASHMIR 192301 UDYAM JK 15 0009999 | PULWAMA | JAMMU AND KASHMIR | 192301 | L4 | Rejected-Finance Rejected being other than L1 bidder | |
| 5 | L5₹38.6 L+₹6.5 L (20.4%)Rejected-Finance KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L5 | Rejected-Finance Rejected being other than L1 bidder |
| Sl No | Description | Qty | Unit | M/S BASHIR AHMAD AND SONS L4 | M/S ABBAS M. ENTERPRISES L1 | MS Ghulam Hassan and Sons L7 | M/S GEE EMM MIR L6 | M/s M Ashraf Brothers L3 | M/s AMIR MAQBOOL L2 | M/s Gh Qadir and Sons L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00B/R PORTION | ||||||||||
| 2.00 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm, deep and getting out in soft/loose soil complete all as specified and directed. | 250 | Sqm | 30 ₹7,500 Lowest | 30 ₹7,500 Lowest | 59 ₹14,750 | 30 ₹7,500 Lowest | 35 ₹8,750 | 30 ₹7,500 Lowest | 70 ₹17,500 |
| 3.00 | Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft / loose soil all as directed. | 50 | Cum | 220 ₹11,000 | 150 ₹7,500 Lowest | 350 ₹17,500 | 320 ₹16,000 | 175 ₹8,750 | 220 ₹11,000 | 300 ₹15,000 |
| 4.00 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete all as specified and directed. | 4 | Cum | 3,500 ₹14,000 Lowest | 3,800 ₹15,200 | 10,000 ₹40,000 | 4,300 ₹17,200 | 5,200 ₹20,800 | 3,500 ₹14,000 Lowest | 7,500 ₹30,000 |
| 5.00 | Reinforced cement concrete design mix M- 30 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete (reinforcement to be measured separately). | 13 | Cum | 7,200 ₹93,600 | 5,000 ₹65,000 Lowest | 10,000 ₹1,30,000 | 8,000 ₹1,04,000 | 8,200 ₹1,06,600 | 5,700 ₹74,100 | 9,000 ₹1,17,000 |
| 6.00 | Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete (reinforcement to be measured separately). | 10 | Cum | 9,100 ₹91,000 | 4,500 ₹45,000 Lowest | 10,000 ₹1,00,000 | 8,000 ₹80,000 | 8,200 ₹82,000 | 9,500 ₹95,000 | 8,520 ₹85,200 |
| 7.00 | M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregrate in beams, cantilevers, bressummers, lintels over 1.5m span; all as specified and directed.
Note : Reinforcement shall be measured and paid seperately. | 18 | Cum | 9,400 ₹1,69,200 | 4,500 ₹81,000 Lowest | 11,000 ₹1,98,000 | 8,000 ₹1,44,000 | 8,050 ₹1,44,900 | 9,200 ₹1,65,600 | 8,511 ₹1,53,198 |
| 8.00 | M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed.
Note : Reinforcement shall be measured and paid seperately. | 4.5 | Cum | 10,500 ₹47,250 | 4,500 ₹20,250 Lowest | 9,000 ₹40,500 | 6,500 ₹29,250 | 8,300 ₹37,350 | 8,000 ₹36,000 | 7,500 ₹33,750 |
| 9.00 | S&F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. | 1,400 | KG | 78 ₹1,09,200 | 80 ₹1,12,000 | 85 ₹1,19,000 | 100 ₹1,40,000 | 88 ₹1,23,200 | 75 ₹1,05,000 Lowest | 85 ₹1,19,000 |
| 10.00 | S&F for TMT bars 6 mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. | 500 | KG | 78 ₹39,000 | 80 ₹40,000 | 85 ₹42,500 | 85 ₹42,500 | 90 ₹45,000 | 75 ₹37,500 Lowest | 85 ₹42,500 |
Tender Value
₹42.6 L
EMD Value
₹85,300
Closing Date
21 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, C/O 8 FBSU, AF STN AWANTIPUR
PROVN/ ADDN/ ALTN OF POL STORES AT CERTAIN LOCATIONS AT AF STN AWANTIPUR.
2025_MES_716310_1
GE (AF) AWA-16/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE (AF) AWANTIPUR
₹85,300
Yes
4 Sept 2025
23 Jun 2025
23 Jul 2025
23 Jun 2025
21 Jul 2025
7 Jul 2025
Amount
B/R PORTION
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm, deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft / loose soil all as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling & mass concrete all as specified and directed.
Reinforced cement concrete design mix M- 30 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete (reinforcement to be measured separately).
Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete (reinforcement to be measured separately).
M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregrate in beams, cantilevers, bressummers, lintels over 1.5m span; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
M&L for reinforced cement concrete (design mix) M-30 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; all as specified and directed. Note : Reinforcement shall be measured and paid seperately.
S&F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
S&F for TMT bars 6 mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat all as specified and directed.
M&L for formwork to sides of pillars, columns etc; rough finish surface of concrete square, rectangular or polygonal all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. rough finish surface of concrete flat all as specified and directed.
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm all complete as specified in soil.
Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point all as directed.
M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.
M&L for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.
M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified. Note:- Intgral water proofing compound shall be measured and paid for separately.
M&L for applying 3mm thick wall care putty in two layer on prepared suface complete all as specified and directed.
Preparation of newly or plastered or un-plastered surfaces of walls and applying two coat of Acrylic washable distemper over a coat of primer complete all as specified and directed.
Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterier emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed. (Make:Asian/Berger/Nerolac/ICI/Shalimar/Garware/Johnson).
M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.
S&F Roof trusses (framed), trussed,posts, struts, purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.
Dismentalling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc complete all as specified.
S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.
S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with 'L' type or 'J' or cranked hook boltes with washers, in roofs as in ridge etc all as specified and directed.
Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson
S&F factory made steel window with side hung shutter incl projecting type hinges with pressed steel handle, and steel peg stay with glazing bars, devetailed or welded complete all as specifed. Note:- Glazing and fly proofing shall be measured and paid for separately against relevent items of this schedule.
S&F for factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, steel peg stay, complete all as specified & directed by Engineer-in- charge.
S&F for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with spring clips in metal surrounds and oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge .
S&F Steel rolling shutters tickness of lath 1.25mm thick with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or gear operated type with bevel gear box & crank handle complete all as specified and directed by Engr-In-Charge.
Mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed.
M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.
M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed
M&L for sand filling of 100mm thick in floors or in foundations including watering and consolidation all specified and directed
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets on any description, any thickness, including cover fillets.
Demolition for floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed.
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment,complete
Taking down chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.
S & F 1.25 mm Mild steel, plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holespunched; includinground headed screws,clout nails or rivet sand fixed to wood orsteel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require including handles , hinges and complete all as specified and directed by Engr-In-Chage.
M&L 100 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred
Supply only Fine aggregate (sand) for sand cousioning
M & L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade incl 25mm sand cousioning layer complete all as specified and directed by Engr-in-Charge.(Sand will be measured & paid separately )
E/M PORTION
M&L for flameproof point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS multistranded copper conductor wire of size 1.5 Sq mm (Nominal area) drawn through and including stove enamelled steel conduit ISI marked not less than 20 mm dia, concealed in wall or on surface as required on site and including one single core multistranded PVC insulated, unsheathed, FRLS type, 1100 volts grade, 1.5 sqmm copper conductor cable as earth continuity cable complete with testing all as specified for One light/fan/exhaust fan point controlled by one flameproof switch with cable 1.5 sqmm size, complete all as specified and as directed.
S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and as directed.
S&F in replacement of Flameproof Weatherproof Switch Socket rated 16 Amps DP with 3-Pin Plug top with separate terminal chamber made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIC, with IP66 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO. Make-Sudhir/CG or equivalent.
Flameproof Weatherproof Tube Light 2x16W/20W LED x 4-feet (wih tuberods of minimum 16W) made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIA & IIB, with IP65 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint shade 631 of IS:5 having temp class T6 certified by CIMFR + PESO with 2nos. 3/4” ET Cable Entries but without Cable Glands and Stopping Plugs.
Supply and Fixing in replacement of Flameproof cum Waterproof LED Bulk Head light fitting of 40W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
S&F Flameproof Weatherproof Exhaust Fan 12” - 305mm Single Phase with 1250CFM - 1440 RPM made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIC, with IP66 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO as per Cat # SF/01. Note : The entire Fan must have the Flameproof certification from CIMFR + PESO and not just the motor.
S&F in replacement of flameproof wiring for submain with FRLS PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in steel conduit along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.
S&F Flameproof Weatherproof MCB Distribution Board SPN 8 WAY made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIA & IIB, with IP65 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO consisting of : 1 x 32A SPN MCB as incomer 6 x 6-32 A SP MCB as outgoing with internal wiring
Supply, laying or passing through pipe, in trench underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 16 Sqmm, 2 core including making electrical connection with thimbles complete all as specified.
Supply, laying or passing through pipe, in trench underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 6 Sqmm, 2 core including making electrical connection with thimbles complete all as specified.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables or other items and getting out soil in soft/loose soil complete all as specifed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified.
Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified.
M&L for GI Tubes, 'light grad', galvanised of 40 mm bore with all fitting for fixing on the wall complete all as specified and as directed.
M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid.
Well burnt old size class 'B' bricks of nominal size 230X115X75 mm abutting each other for cable protection, complete all as specified and directed
M&L for Cutting of bitumen road/PCC road/hard standing for laying of GI pipe and passing of cable including making good to disturbed surface with PCC (1:4:8) type B1, using 20 mm graded crushed stone aggregate and matching with existing surface, complete all as specified and directed.
Supply and installation of autometic fired based 5 KG ABC fire extinguisher (MAP 90 based portable stored pressure) unique guage testing system (UGTS) mechanism of IS 15683:2006 standered , brass chrome plated valve with large loop stainless pull pin including wall bracket for hanging complete all as specified and as directed.(Makes-GETECH/mINIMAX/CEASEFIRE/COSMOS)
Supply installation, testing and commissioning of intelligent addressable Micro processor based fire alarm control panel with 02 loop capacity Networkable and expandable, with dual stage alarm facilities like hooter, fire / fault indicators, audio-visual signals, auto learn features, flexibility in shared zone mode or stand alone system, PC networking connectivity as RS232/RS485, communication facility. suitable for connecting to other systems, shall be interfaced to Graphic Software, having inbuilt power supply complete all as specified and directed. Note:- (Each loop consists of 99 detectors & 99 modules and up to 200 detectors and modules)(Makes-Staiage/Milton/photonic)
Supply, installation, testing and commissioning of following Detectors & devices :-(Makes-Valcn/Nitin/Vijay/Apollo)
Detectors Complying with and type certified to EN 45 Photoelectric /Optical with base with self built intelligence as per IS: 11360 multisensor detector with heat and smoke combination complete all as speciefied and as directed.
Addressable Manual call Point (MCPs) resettable type enclosed in strudy box and installed at height of 1.4 mtr interlocked with main control panel complete all as specified and as directed.
Addressable electronic sounder cum strobe complete all as specified and as directed.
Supply and fix Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 1000 meter range
S&F 2 Core X 1.5 Sq.mm multistrand armoured copper cable with all accessories and complete in all aspects, complete all as specified and as directed Note:- (i) The cable shall be having cable pointer at every meter (ii) These cables shall be used for the wiring of detectors and devices
S&F 2 Core X 2.5 Sq.mm multistrand armoured copper cable with all accessories and complete in all aspects, complete all as specified and as directed Note:- (i) The cable shall be having cable pointer at every meter (ii) These cables shall be used for the wiring of detectors used for the wiring of detectors and devices.
S&f for MS conduit for fire alarm system wiring of flame prrof category ISI marked : 9537 including connected joints bends etc of size not less than 25 mm in dia and 1.6 mm wall thickness complete all as specified and as directed.
Suply & fix UPS 1.0 KVA suitable for working on 230 volts 50 Hz AC supply with all connections in and including copper conductor complete all as specified and directed by engineer in charge. Make: Microtec/Sukam/APC
Supply & fix single pointed air termination aluminium rod 12mm dia, 300 mm long Note- Work include making of PCC block for mounting of Aluminium Spikes
Supply & fix aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip.
M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil including testing complete all as specified.
M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified.
Note:- An amount of Rs. 7,876.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/s AMIR MAQBOOL (BID ID -3357512)
M/s M Ashraf Brothers (BID ID -3357114)
M/S BASHIR AHMAD AND SONS (BID ID -3357538)
M/s Gh Qadir and Sons (BID ID -3361543)
M/S GEE EMM MIR (BID ID -3365691)
MS Ghulam Hassan and Sons (BID ID -3365153)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .