Loading…
Loading…
Tender Value
₹27.2 L
EMD Value
₹54,300
Closing Date
5 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
12 conditions · 1 needing a document upload
Electrical License: The tenderer shall possess a valid Electrical ContractorLicense, issued by any State Government or Union TerritoryAdministration, authorizing execution of electrical works up to 650 V. Thecontractor shall have in his employment or shall engage a person holdinga valid certificate of competency issued by any State Government orUnion Territory Administration for supervision of electrical works up to650 V. Offers not accompanied by a valid Electrical Contractor Licenseand requisite Supervisor competency for works up to 650 V shall besummarily rejected Note: In case of expiry of validity of license duringcontract, the contractor should renew the license so that it is alwaysvalid during contract).
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Nanded Division: - Provision of Power Quality Restorers in Electrical Installations
NED-E-24-2026-27~SCR
NED-E-24-2026-27
Open
Works - General
6 Months
Nanded, Maharashtra
₹0
₹54,300
12 Sept 2026
12 Sept 2026
21 Sept 2026
17 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 27,16,134 | ||
| — | 1.00 | — | — | ||
| Design, fabrication, assembly, testing, supply, installation and commissioning of Active Power filter panel with 3 level topology . The active filter panel shall be fabricated out of 1.6 for side doors and 2mm for structure and front door CRCA sheet steel in cubicle compartment, free- standing, floor, dust and vermin proof with reinforcement of suitable size, angle iron, channel, 'T' sections and/or flats wherever necessary. Pre-treatment of the panel shall be carried out before epoxy powder coating of minimum 120 um thickness with atleast nine tank process shall be ensured. The panel shall adhere to IP 42 (IP 20 in case of Modules) protection standard as per IEC 60529. The color of powder coating shall be standard. Cable entry shall be provided on bottom (or as per client's requirements) of the panel for top / bottom entry.AHF & switchgear shall be single make OEM Panel. for 100 KVAR SVG PANEL | — | — | — | 5,62,850 | |
| — | 3.00 | — | — | ||
| Design, fabrication, assembly, testing, supply, installation and commissioning of Active Power filter panel with 3 level topology . The active filter panel shall be fabricated out of 1.6 for side doors and 2mm for structure and front door CRCA sheet steel in cubicle compartment, free- standing, floor, dust and vermin proof with reinforcement of suitable size, angle iron, channel, 'T' sections and/or flats wherever necessary. Pre-treatment of the panel shall be carried out before epoxy powder coating of minimum 120 um thickness with atleast nine tank process shall be ensured. The panel shall adhere to IP 42 (IP 20 in case of Modules) protection standard as per IEC 60529. The color of powder coating shall be standard. Cable entry shall be provided on bottom (or as per client's requirements) of the panel for top / bottom entry.AHF & switchgear shall be single make OEM Panel. for 50 KVAR SVG PANELS | — | — | — | 12,63,000 | |
| — | 500.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathedAluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs andterminations complete. | — | — | — | 1,70,500 | |
| — | 500.00 | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armoured aluminiumcable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments and with necessary lugsand terminations complete. | — | — | — | 2,61,500 | |
| — | 500.00 | — | — | ||
| "Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30cm widex90cm deep oad etc., for laying of HT/LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and asper directions of Rly.Engineer." | — | — | — | 1,01,500 | |
| — | 1200.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 14,400 | |
| — | 1000.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80grade in PN-4 outer dia of HDPE pipe110mm (nearest 4"" dia) and wallthickness minimum 4.1 mm maximum 4.3mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto or similar | — | — | — | 3,12,000 | |
| — | 8.00 | — | — | ||
| Supply and erection of earth electrode as perthe enclosed specification (including digging earth pit, electrode earth box with reinforced concrete complete with all connected materials and works including connecting the earth electrode and aerial earthing according to IS 3043 and RDSO drawing ETI/OHE/P/7021 in other than substations. | — | — | — | 30,384 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenNED-E-24-2026-27Powerqualityrestorers.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlips1to12_compressed.pdf
ATTACHMENT
RitesInspectionLetter.pdf
ATTACHMENT
Earthing specifications
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .