GE 861 EWS-61/2021-22

Amount

Taking down 15 mm dia steel water tubing and connections including cleaning for re-fixing all as directed by Engineer in charge.

Taking down 20 mm dia steel tubing and connections including cleaning for re-fixing all as directed by Engineer in charge.

S & F 15 mm dia mild steel water tube medium graded galvanised with all fittings and fixed complete, concealed to walls and ceiling or laid in floor complete all as specified.

S & F 20 mm dia mild steel tube medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified.

Fixing only of 15 mm dia old steel tubing in new or old position with new fittings complete all as specified.

Fixing only of 20 mm dia old steel tubing in new or old position with new fittings complete all as specified.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in CM 1:6 complete all as specified and directed

Description all as per Srl item 8 above but except bricks.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M & L for rendering 15 mm thick on surface other than fair face of brick work in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement in wall complete all as specified.

M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:3 finished even and smooth without using extra cement in ceiling complete all as specified.

M & L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer paint complete all as specified.

M & L for two coats of Oil bound distemper over a coat of chalk whitening on new plastered surfaces of wall including preparation of surface complete all as specified.

M & L for three coats of white washing on new plastered surfaces of on ceiling surface including preparation of surface complete all as specified.

Dismantling of plain or corrugated steel sheet any gauge thickness for roof covering upto height of 10-12 m complete all as specified.

S & F of 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugated side lap fixed with L type or J type hook bolts in roofs, walls etc. upto height of 10-12 m with grade of zinc coating 275, complete all as specified.

Description all as per item No 18 here in before but except sheet complete all as specified.

S&F 0.80mm thick plain galvanised mild steel sheeting in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.

M & L for Preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified. (Note : Work to be carried out upto 10 mtr height)

M & L for Preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. (Note : Work to be carried out upto 10 mtr height)

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs including cover fillets etc complete all as specified.

M & L for 6 mm thick ply wood grade BWR type BB fixed with nails to timber frame work on ceiling complete all as specified.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 3 but not exc 6 sqcm complete all as specified

Taking down chowkhats or frames not exc. 1.5 Sqm but with shutters (without taking off shutters from the frames) complete all as specified & directed

35 mm thick, 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

S&F for 30 mm thick 2nd class hard wood (Sal/Hollock) glazed and skeleton windows/ventilators shutters open rebated and prepared to receive glass, gauge etc , divide into square with plain chamfered or rounded, mitered and rebated sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified.

Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.50 sqm and not exceeding 4.00 sqm each complete all as specified & directed

Supply and fixed 35mm thick 2nd class hard wood(Sal/Hollock) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) complete all as specified.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified.

S & F in repair 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq m in each pane complete all as specified.

S&F in repair 300 mm size MS helical door spring including roller & roller plate complete all as specified & directed.

M & L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M & L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L 2nd class hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm long , all as specified and directed

S&F aluminium anodised barrel tower bolts extruded section of size 100 mm long , all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 200 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 75mm long complete all as specified and directed.

S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.

S&F aluminium handle extruded fabricate type anodised of size 100 mm complete all as spd and directed.

S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms) complete all as specified.

S&F in repair 20 mm Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed any colour high pressure screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified.

Description all as per item No 51 above but dia 15 mm complete.

S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair water closet vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests including provision of lime concrete bedding with `P' trap and connection to drain and to flushing pipe anti syphonage pipe (excluding flushing cistern) complete all as specified.

S & F in repair for 125mm size chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm dia or union fixed in repair complete all as specified.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair PVC valve less 10 liter capacity symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.

S & F in repair 15 mm bore bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferruel complete all as specified and directed.

S & F in repair 15 mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for union complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store, complete all as specified and as directed.

M&L light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over screed bed or bedding layer of mortar 15 mm thick (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Non-skid jointless coloured ceramic tiles 7 to 8 mm thick (square /rectanglar) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed .

M&L for coloured glazed ceramic tiles in vertical surface 450mm x 300mm x 6 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc

M & L for machine cut kota stone slab flooring 16mm to 18mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick screed in cement mortar 1:6 including rubbing and polishing complete all as specified.

M & L for machine cut kota stone slab flooring 16mm to 18mm thick in riser of steps, skirting dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15 mm thick screed bed in CM (1:4) and rubbing and polishing complete all as specified and directed.

M&L for Green Marble Stone 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repairs kitchen plate rack stainless steel 1mm thick of size 31"x36"x10" complete all as specified and directed

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings.

Factory made Solid PVC door shutter 28 to 30 mm thick (style) consisting of solid panel wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part I.

M&L for Plain Cement Concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified in SSR Part I including disconnectiong of existing tank and removing complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

M&L for Lagging to 15 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

M&L for Lagging to 20 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

Demolition of Plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment as in floor including 25mm thick sand cushioning, complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles including necessary formwork complete all as specified and directed.

M/S Hilal Constructions

M/S A.N CONSTRUCTIONs

M/S U.K. ENTERPRISES

JANDOO AND CO.

M/S HAMID & CO