SPECIAL REPAIR TO SUNKEN FLOOR SANITARY FITTING, CI/GI RAIN WATER PIPE, PVC WATER STORAGE TANK AND FLOORING AT BLDG NO. P-09 AT ENGR SQN UNDER GE (N) AT BATHINDA MIL STN

Amount

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, and remarking rubbish from the premises complete all as specified.

M & L for Brick work using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each and removing from site including cutting holes for removal of hold fast complete.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified in Preamble 8B.3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010).

S&F factory made solid PVC Moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site all as specified in preamble 8B.4.1 and shown on drawing on Sl Page No 161 of SSR Part II (2010) and MES Schedule Part I clause 8.31.4.1.

S & F barrel tower bolts PTMT150 mm long complete all as specified .

S & F butt hinges, PTMT of size 100mm long complete all as specified.

S & F handle PTMT 150mm long complete all as specified .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each all as specified.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 105 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S&F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, complete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S&F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sections weighing not less than 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc complete all as specified. (minimum thickness of powder coating shall be 50 micron)

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified.

S & F Frosted or pin headed glass, 5.5 mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/spring clips wherever necessary complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips size not exceeding 1.5 Sqm each pane complete.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary complete all as specified.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S & F as in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S & F floor door stopper of aluminium alloy body and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165.

M & L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate in filling in chowkats/ door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

S & F in repairs 100 mm long stainless steel butt hinges, medium weight complete all as specified.

S & F mild steel barrel tower bolts, stove enamelled black, with bright bolt, length of bolt 200mm complete all as specified.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 250mm.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S&F in repairs 20mm dia decorative harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as in curtain rails. (Note : The cost of brackets and knobs is deemed to be including in the quoted unit rate. Nothing extra shall be paid on this account.)

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

M & L for rendering as in sunken floor 15 mm thick in CM (1:3) on fair faces of brick work or cement concrete surfaces of wall including finishing the surface even and fair including mixed with liquid water proofing material @ 200ml per bag of cement. NOTE: Supply only water proofing material shall be measured and paid separately.

Supply only liquid water proofing compound, ISI marked.

M&L for one coat of Dr Fixit, Pidilite in sunken floor portion of tolilet , bathroom etc propotion to be use as per Manufacturer's instruction , applying by brush complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in sub base , filling of sunken floor all as specified..

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floors , bases of sunken floor and similar items complete.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete.

S & F in repairs vitreous china wash down water closet pan (EWC) (pedestal pattern) white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including white coloured closed pattern seat cover and fixing bolt and flush pipe 32mm dia (excluding flushing cistern ) including making good to floor complete.

S & F as in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia complete.

S&F in repairs vitreous china urinal, half stall type, white, including and providing and fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, S&F automatic flushing cistern with brackets and spreader, flush pipe, grating and union for discharge pipe complete.

Demolition of RCC of any description & in any position not otherwise specifically provided for, complete all as specified.

M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified.

M & L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for granite stone slab (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, skirting , dado , window cills, cooking platforms and like set and jointed in neat cement slurry with pigment and pointed in white or coloured cement to match the shade including 20 mm thick Screed bed or bedding layer in CM (1:4) including rubbing and polishing etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Complete all as specified.

M&L for Rounding of/ moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish) complete all a specified.

S & F in repairs vitreous china wash hand basin, countersunk in granite slab , white, oval shape of size 590mm x 420mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated ,and PVC waste pipe of 32 mm dia and fixed all as directed complete, .

S&F pillar taps, cast copper alloy, with capstan heads, fancy type, quarter turn, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe for 15mm bore dia of pipe complete all as specified.

S&F in repair PVC connection of length 450 mm, 15 mm size with PTMT nuts of approved quality complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified.

M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.

M & L for 20 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing from site all as directed.

S & F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 210 gram) complete all as specified.

S & F in repairs stop valves, cast copper alloy, quarter turn, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified.

S & F in repairs stop valves / Angle valve, chromium plated, fancy type, quarter turn, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified.

S&F in repairs brass chromium plated soap dish of size 100 x 100 x 60 mm fixed to wall with brass screws all as specified.

S & F brass chromium plated shower rose 125 mm size with or without swivel joints fix to steel pipe or union complete all as specified and as directed.

S&F in repairs brass CP mixer for mixing hot and cold water screwed for iron pipe of 15 mm bore all as specified.

S & F 15 mm bore chromium plated, fancy type, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

S&F in repairs, PTMT towel ring complete.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps including dismantling of existing drain pipes, jointed in cement mortar all as directed.

S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, laid in trenches or in floor including dismantling of existing drain pipes, jointed in cement mortar all as directed.

S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps including dismantling of existing drain pipes, jointed in cement mortar all as directed.

S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, laid in trenches or in floor including dismantling of existing drain pipes, jointed in cement mortar all as directed.

M&L for 100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified.

S & F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified.

S & F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified.

S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified.

S & F 100mm cast iron Cowl fixed with cement joint in CM 1:2 complete all as specified.

S & F PVC (SWR) 110mm bore pipes, single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps including taking down existing eaves gutters and rain water pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan necks, etc. (measured overall as fixed along the centre line over fittings and accessories)

S&F PVC (SWR) 110mm bore bends / shoes of any radius.

Taking down cement plaster including raking out joint hacking for key scrubbing down with water etc complete .

M & L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction i complete all as specified. (Note – Liquid WPC shall be measured and paid for separately.)

M & L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified.

M & L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified.

M & L for two coats of cement base paint on new plastered wall surfaces after applying a coat of alkali resistant primer including preparation of surfaces complete all as specified.

M & L for preparation of newly plastered internal surfaces of walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers / mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion paint by using airless spray / roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

M&L for preparation of newly plastered or unplastered surface and applying three coats of white wash on ceilings compete all as specified..

Complete removal of existing treatment of external walls by scrapping with steel wire brush or any other means including filling depressions of scrapped surfaces and M & L for two coats of Cement base paint over a coat of alkali resistant primer of any shade complete all as specified.

Complete removal of existing treatment of internal wall (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and M & L for preparation of old plastered surfaces of walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers / mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion paint by using airless spray / roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

M&L for preparation of old plastered or previously treated surface and applying one coat of white wash on ceilings complete all as specified.

M & L for painting to new steel surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide or zinc chromium including preparation of surfaces complete all as specified.

M & L for painting to old steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with one coat of synthetic enamel paint including preparation of old painted surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles, (square / rectangular) of size 400mm x 400mm x 7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified.

Demolition of PCC (unreinforced) in ground floor and paving not exceeding 15cm thick (below or above ground floor) and removing the debris upto a distance as directed by Engr-in-Charge.

M&L for moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified.

M & L for 75mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in sub base under floors complete all as specified.

M & L for machine cut kota stone slab flooring minimum size 450 mm x 450 mm, 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 15 mm thick Screed bed or bedding layer in CM (1:4) complete.

S&F glazed ceramic coloured / printed tiles 450 x 350mm / 450 mm x 300 mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile complete all as specified.

M & L for machine cut kota stone slab 20 to 25 mm thick as in riser of steps , skirting , dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over and including 10 mm thick Screed bed or bedding layer in CM (1:4) complete.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified..

S & F framed brackets of angles or tees with web and flange cut to shape , drilled and countersunk for screw including bending and welding angles , as necessary etc not exceeding 10 Kg each bracket etc conforming to Fe 290 Gde E-165 complete all as specified.

Treating the surface of old kota stone with bees wax polish complete all as specified.

Internal Electrification

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in existing PVC concealed conduit and including 3 mm thick bakelite laminated sheet top cover and new synken box for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed.

All as per item No 104 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc complete all as specified.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium duty ISI marked) and conduit fittings with and including replacement of mild steel/ pressed steel sunken box and outer sheet and provision of fixed concealed modular type sunken box with inner and outer cover including all screw, cup washer used to brass etc for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed.

All as per item No 106 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 106 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc.

S/F switch piano flush type 5 Amp 230V AC one way complete as specified.

S/F switch piano flush type 15 Amp 230V AC one way complete as specified.

S&F socket outlet 2 in 1, 3 pin, 6 Amp, flush type, 230 volts, ISI marked complete all as specified.

S&F socket outlet 2 in 1, 3 pin, 6/16 Amp, flush type, 230 volts, ISI marked complete all as specified.

S & F ceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 20 x 50 mm, three terminal (ISI marked) complete all as specified.

S & F Exhaust fan 300mm sweep . Including electrical connection by providing twin core round copper conductor of suitable size complete all as specified. Make – Havells / Crompton / Bajaj

S & F Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb.

S & F LED mirror light fitting of 09/10 watt, 6000K, linear & compact with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete including 07 watt tube rod make all as Model No LCTL-9-CDL of Crompton or equivalent model of approved make from list of make given in Appx 'B' including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed.

S & F 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS 16106/IS 16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white, in built LED driver, power factor>0.95 , Make all as per Crompton Cat Part No. DMLN1LT8-16 (for batten) and Cat part No. LT8-20-865-2 (for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appx 'B' connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size including taking down old existing light fitting all as directed.

S & F sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, IP-43 protection, 4 way, DB TPN 415 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc including taking down old unserviceable DB complete all as specified.

S & F MCB, TPN, 63 Amps, 'C' curve , 415 Volts, 50 Hz, breaking capacity not less than 10 KA with over load and short circuit protection and including taking down old unserviceable MCB TPN complete all as specified.

S & F MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection including taking down old unserviceable MCB SP complete all as specified.

Easyways Enterprises

M/s Kamal Builders

SHARDA ENTERPRIES

SAPNA BUILDERS

BALAJI CONSTRUCTIONS