WBPWD/SSE/SWEC/NIQ91/2025-26

Amount

Supply and delivary of 4 core x 10 Sq. mm. XLPE /PVC, Al armoured cable. [Make: Gloster/Polycab/RR Kabel/Meshcab/Havells]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish from 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

4 Core 10 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core 10 Sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

32 mm dia

Supplying & Fixing PVC waterproof type looping cable box (Make: SINTEX/As per EIC ) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Boaring for road crossing for laying cable as & when required

S.I.T.C. of 02 (Two) no LED Signage Board(Router Cutting) with liquid Acrylic letters on ACP Board of 3 mm Thick ( Make - Aludecor/ Alstone) of size 20 ft. x 4 ft or other suitable size to accommodate all the matters / contains as approved by the authority to be made with 25 x25 x 4 mm M.S angle Iron, 18 S.W. G Squrae/ Round Hollow bar , Base plate (10mm Thickness) required for fixing the necessary Nuts , Bolts , Washers , supporting angle Iron , Clamp etc. and ACP Sheet on all sides to be moulded uniformly, Side fabricated by Aluminium 'L' Channel , upon which elevated or box type letter made from imported liquid acrylic will be fixed.

The Thickness of Acrylic will be 5 mm (for small letters) , 8mm (for Big letters) and 10 mm (for very big letters). The Back Side of the letters is covered by 3 mm thick ACP (Make- Aludecor/Alstone) or as per choice of EIC

The inside of the letter Supplying and Fixing of best Quality LED Lighting arrangement of fully water proof IP67 ZIg-Zag strip made of Samsung 2385 LED module, 100 Lumen/watt( containing 54 LED per Mt. & 9W/Mt.) or Korean LED Module Made Made Samsung 5630 LED ( 1.2 W per Module) to be Fixed in proper arrangement with necessary inter connection. The electrical parts & Driver should be protected from rain & Dust. The warranty of the LED will be minimum two years. The letters are sealed by exterior grade Silicon. The back side of the Board Covered by 22 S.W.G G.I sheet with Nuts & Bolts. The Signage matter was given by the authority( Duly signed by Authority) and also need to approved the sample by the authority.

Necessary Electronic Diver / power supply device to be fixed in the ACP or suitable places

Intensity : Same & smooth uniform throughout without any dark patch

Visibility : upto 100 meters for normal eyes

Carrying Charges of the manufacturing LED board from co.'s work shop to work site.

The complete sign board will be installed in Entrance gate by MS structural work in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling, bolting etc. as per design of manufacturer and approval of EIC. 1(One) coat of red lead primer and 2(Two) coats of Synthetic enamel paint of approved shade shall be provided after necy. preparation of surface. installation will be done as per manufacturer recommendation and as per direction of EIC.

Supply & Laying 3 core 2.5 sqmm UA Copper Cable. [Make: Gloster/Meshcab /Polycab/RR Kabel/Havells]

SUN ENTERPRISE (BID ID -7710864)

M/S JOGMAYA ENTERPRISE (BID ID -7710735)

SREE KRISHNA ELECTRICAL (BID ID -7683081)