Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
2 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document- 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any work in connection with Signaling installation. The work shall include indoor wiring component also if tendered work involves Indoor wiring alteration in the existing system. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
32 conditions · 15 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Replacement of over aged/worn out electrically operated lifting barriers in B & D route over Firozpur division.
433-Sig-T-76-25-26
433-Sig-T-76-25-26
Open
Works - General
6 Months
Firozpur, Punjab
₹0
₹3.1 L
2 Mar 2026
9 Feb 2026
53 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,09,30,971.92 | ||
| — | 42.00 | — | — | ||
| Supply of electrically operated lifting barrier 110V DC as per requirement and as per RDSO Spec. RDSO/SPN/208/2012 Ver.2.0 and Amendment 1 or latest complete set along with pedestal driving and driven mechanism, booms length as per site requirement up to 9.76 mtrs (approx 10 mtrs), balancing weight, boom support and motorized boom locking/unlocking arrangement, circuit controllers with limit switches, operating panel floor mounting type with buttons and switches, solid state electronic flasher, dual tone warning bells, hand generator & crank handle for emergency operation with all accessories complete in all respect. Tool kit consisting of standard sizes of wrinch/ spanner and Allen keys should also be supplied with each set (02 nos.) of Electric Lifting barrier as mentioned in para 10.2 of RDSO/SPN/208/2012 Ver 2.0 or latest. (A Set consists of two booms and other accessories as per RDSO's latest Specification). (Inspection: RDSO) Note: Flashers and warning bells/hooters to be inspected by Consignee. | — | — | — | 1,68,81,156.6 | |
| — | 500.00 | — | — | ||
| Supply of electric fuse complete with fuse block made of PBT for Railway signaling as per IRS-S-75-2006 (Rev.2) or latest, fuses non-deteriorating type low voltage to suit Specn. No. IRS:S-78-2006 or latest, 2 Amp/4 Amp/16 Amp/400 mA fuses in ratio of 60:20:10:10. Fuse block shall be suitable for round head type fuses. (Inspection: RDSO for 2 Amp/4 Amp/16 Amp) & (Inspection: Consignee for 400 mA) | — | — | — | 1,01,545 | |
| — | 42.00 | — | — | ||
| Supply of Key lock relay, type TMA 24V DC with 2F/2B contacts configuration with different wards combination as per RDSO spn. No. IRS:S-46, S-34 & S-23 and RDSO/SPN/219/2016 ver 1.0 with Amendment-1 or latest. Details of ward combination will be provided during execution of work. (Inspection: For bare relay -RDSO, for key lock housing- consignee) | — | — | — | 2,81,701.14 | |
| — | 42.00 | — | — | ||
| Supply of apparatus case Large with 'E' type lock and key ward no. 42 and handle as per RDSO Drg. no. RDSO/S-11500 or latest. (Inspection: RITES) | — | — | — | 7,86,496.62 | |
| — | 3000.00 | — | — | ||
| Supply of ARA terminal block 25 mm center small M-6 terminal made of PBT as per RDSO drg. no. SA-23741-A (alt-4) & spec. no. IRS-S-75/2006 (Rev:2) or latest. (Inspection: RDSO) | — | — | — | 1,68,000 | |
| — | 8.00 | — | — | ||
| Supply of railway signalling cable copper conductor and wires with PVC insulated sheathed for indoor railway signalling of size 16/0.20 mm as per RDSO Spcn. no. IRS : S 76-89 amdt. 3 or latest. (Inspection: RDSO) | — | — | — | 54,544.56 | |
| — | 42.00 | — | — | ||
| — | 30.00 | — | — | ||
| — | 230.00 | — | — | ||
| — | 10.00 | — | — | ||
| Supply of Digital Earth Clamp Meter Model DECT-2 Motwani or similar, display 4 digits LCD, Large LCD, Long Jaw size 65*32 mm, Range 0.01-1000 ohms, Over range (OL ohm) as well as low range (L0.01 ohm) indication, automatic range selection, automatic self calibration, single measuring time of 1 sec. etc. (Inspection: Consignee) | — | — | — | 1,58,244 | |
| — | 40.00 | — | — | ||
| Supply of Tool kit for ELB. ONE TOOL KIT COMPRISING OF THE FOLLOWING . (1) TOOL BOX TO DRG.NO.CWM/SK/0104 - ALT-5: 1 NO. (2) CUTTING PLIER (6 INCHES): -1 NO. (3) NOSE PLIER (6INCHES) - 1 NO. (4) PLIERS CUTTER (6 INCHES) -1 NO. (5) SCREW DRIVER SET TO IS:844-1 NO. (6) SCREW DRIVER LARGE (12 INCHES) TO IS:844: 1 NO. (7) ADJUSTABLE WRENCH SPANNER (12 INCHES) - 1 NO. (8) DOUBLE END SPANNER (17X19) TO IS:2028 -1 NO. (9) DOUBLE END SPANNER (30X32) TO IS:2028 - 1 NO. (10) DOUBLE END SPANNER (30X36) TO IS:2028 : 1 NO. (11) SINGLE END SPANNER (48 mm) : 1 NO. (12) BOX SPANNER TO IS; 7381 OF FOLLOWING SIZES (10MM,13MM,16MM,19MM & 30MM )-1 NO EACH. (13) T- ROD TO SUIT M6 TO M24 BOX SPANNERS TO IS; 7975-1 NO. (14) EXTENSION ROD 10"" TO SUIT T-RODS OF BOX SPANNERS M6 TO M24 TO IS:7991-1 NO. (15) BALL PANE HAMMER (1LBS) -1 NO. (16) GREASE GUN LEVER TYPE G-509 - 1 NO. TO BE PROCURED ONLY FROM REPUTED BRANDS OF TAPARIA, JHALANI OR STANLEY EXPECT FOR TOOL BOX, GREASE GUN AND SINGLE END SPANNER 48MM. SUPPLY SHALL BE MADE AS ALL TOOLS ACCOMMODATED INSIDE THE TOOL BOX. (Inspection: Consignee) | — | — | — | 1,44,045.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalGCC-2022-uptoACS6.pdf
IRGCC2022ACS7.pdf
IRGCC2022ACS8.pdf
IRGCC2022ACS9.pdf
IRGCC2022ACS10.pdf
StandardTenderDocument2022.pdf
correctionslip1toSTD2022.pdf
JPOforProtectionofcablesduringexecuitionofvariousworks_1.pdf
Specialconditionsofwork.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .