Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.0 L
Closing Date
18 Jul 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
GENERAL
19 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. SPECIAL NOTE:- The balance sheet and all other financial documents attested/certified by CAs to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN, failing which the offer is likely to be rejected without any further reference. (Authority: CE's letter No.- CE/G/Arb& Cont. Mgt./Tender Circular/Pt.1/317, Dated: 11:03.2025)
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Technical Eligibility Criteria: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published.
[Explanation for Eligibility Criteria: 1. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. 2. In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. 3. If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials. 4. In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. 5. If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet) of GCC April - 2022, the same shall be considered for the purpose of fulfillment of credentials.
6. In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility. 7. In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution /split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. 8. In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm(e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
9. In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. 10. Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. 11. In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will 1.4.1 be passed on to the successor. 12. If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. 13. In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not beadded in partnership firm AB. 14. In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. 15. In case company A is merged with company B, then company B would get the credentials of company A also.]
Defination of Similar Work :- Any civil Engineering work.
149 conditions · 7 needing a document upload
Checklists for submission of documents while submitting the tender. : It shall be mandatory to submit the following documents (relevant to the nature of the firm) along with offer.
For Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.: - Please submit a Self-certificate by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. in the prescribed format as Annexure-V(A). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer.
Fulfillment of Standard Technical and Financial Criteria as per tender documents.
(a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) IRSGCC April-2022.
(b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) IRSGCC April-2022.
(c) Partnership Firm: The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IRSGCC April-2022.
(d) Joint Venture (JV) (If applicable): The tenderer shall submit all documents as mentioned in para 17 of the Tender Form (Second Sheet) of IRSGCC April-2022.
(e) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) of IRSGCC April-2022.
(f) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IRSGCC April- 2022.
(g) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of IRSGCC April-2022.
Declaration regarding Retd Railway Employee.
PAN
GST REGISTRATION
EPF REGISTRATION (IF APPLICABLE)
Bid Security as Bank Guarantee Bond from a scheduled commercial bank of India . The Bank Guarantee Bond shall be as per Annexure VIA (AVAILABLE IN GCC APRIL 2022 WHICH IS UPLOADED IN DOCUMENT TAB) and shall be valid for a period of 90 days beyond the bid validity period. The original Bank Guarantee should be delivered in person to DEN(South)/RNC or DEN(East)/RNC before closing date for submission of bids (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. Bank Guarantee Bond should be with following details:-
1.14.1 Acting through - DRM(Engg.), South Eastern Railway, Ranchi.
Beneficiary: FA & CAO, South Eastern Railway, Garden Reach, Kolkata.
Duly filled and signed Annexure VIB (AVAILABLE IN GCC APRIL 2022 WHICH IS UPLOADED IN DOCUMENT TAB) ) duly supported by Audited Balance Sheet duly certified by the Chartered Accountant. (for work costing more than 50 lakhs )
Technical Eligibility Criteria (for work costing more than 50 lakhs).
BID CAPACITY:- For tenders having advertised value more than Rs 20 crore.
Joint Venture (JV):- For tenders having advertised value more than Rs 10 crore.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Commercial-Compliance:-
Tenderer must have valid PF code number. Tenderer should upload document with respect to valid PF code number . Bill will be cleared only after verification of PF challan paid for previous month among all other statutory dues by the contractor/establishment.
Tenderers are required to upload copy of Permanent Account Number & GST.
Zonal works i.e. execution of (a) new works, addition and alteration to existing structure, special repair works and supply of building materials subject to the costing of each such work not exceeding Rs. 5,00,000/- (Rupees five lakhs) and (b) all ordinary repair and maintenance works during the period from 01.07.2025 to 30.06. 2027 for the section "Ranchi (Ex) to Gangaghat (Ex) including all Service building" under SSE(Works)/Line/RNC.
DRMENGGRNC-65-2025
DRMENGGRNC-65-2025
Open
Works - General
24 Months
Ranchi, Jharkhand
₹0
₹2.0 L
18 Jul 2025
26 Jun 2025
20 items across 2 schedules · ₹4,51,214.12 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Desludging of Big/small septic tanks/ Aqua privies including digging of shallow trenches each up to 1.5 meters deep for dumping sludge (After getting sufficiently dried up) into the pits /shallow trenches at a distance of approx. 60 meters from the nearest Railway quarters using contractor s phenol or bleaching powder whatsoever and covering the site/ shallow trenches by Railway s earth completely with contractor's materials, tools, plants and labour etc. at different stations and as per the direction of the Engineer-incharge . The rate includes all lead, lift, crossing lines etc. complete. | Each | 4.00 | 1,804.51 | 7,218.04 |
| 2 | Repairs to tube well in colony/platform with contractors necessary materials such as leather buckets with all lead, lift taxes etc. | Each | 2.00 | 1,631.16 | 3,262.32 |
| 3 | Resetting of interlocking old 80mm thick precast CC Paver Block. | Sqm | 75.00 | 226.84 | 17,013 |
| 4 | Cutting uprooting of trees or plants of any size from the wall or slab or chajja or parapet or roof etc. of the multi-storied building duly making hole into masonry and refilling the same with concrete or brick as per site condition after due application of hot copper sulphate or common salt to arrest further growth of plants. Rate includes all labour, lead, lift, taxes etc. complete except cement which will be supplied free of cost by Railway asper Railway scale of consumption. Note.: - If the plant comes up in same location within 06 months, no payment will be done. | Each | 600.00 | 26.16 | 15,696 |
| 5 | Desludging of the existing Colony and yard drains by taking out sludge, garbage, muck and other accumulated materials and disposing of the same to the nominated places upto 100 meters free lead including all lift and crossing any numbers of railway lines including removing and placing back slab covers wherever necessary. The work is to be done with contractor's labour and tools complete. | Running Metre | 1000.00 | 12.77 | 12,770 |
| 6 | Repairs to Damage Concrete in ceiling (Beam or Slab or Columns by following method: - (a) Providing temporary and adequate support by properly designing, staging and shuttering consisting of tubular steelcucaly plus props (100mm dia.) from the floor. (b) Removing damaged, loose, spalled and friable concrete by wire brushing, scraping etc. exposing rusted reinforcement till sound core concrete is reached. (c) Cleaning rusty reinforcement suitable by wire brushing scraping or other mechanical means as approved by the Engineer -in - charge. (d) Welding lapping additional reinforcement at locations where 30 percent or more area of existing reinforcement has been lost as per direction of the Engineer - in -charge. (e) Apply two coats of POLYMER MODIFIED ANTICORROSIVVE COATING of any of the following makes SIKA TOP ARMATEC108 or COLUSAL MK + COLUSAL 25or ANTICOR or Armour Crete Marinc coating or any chemical similar to the generic name underlined above. The name of chemical to be used in the work and manufacturer's instructions in his printed Catalogue that is SIKATOP ARMATECH - 10S Approx. average 3.5kg to 4kg per m2 of reinforcement area. (f) Applying over well-prepared concrete surface cement slurry suitable admixed with POLYMAR MODIFIED BONDINGAGENT of any of the following makes SIKA LATEX OR ZENTRIFIX HB +NAFUFILL BB2 or BOND - X or any other chemical similar to the generic name underlined. The name of chemical to be used in the work and manufacturer's instructions in his printed Catalogue that is SIKA India Pvt. Ltd. The dosage as per manufacturer's instructions in his printed Catalogue that is SIKA LATEXWATER CEMENT= 1:4:6. (g)While compound coat is still tacky repairing area by applying cement, sand mortar1:3 or cement concrete (1:1.5:3) admix with suitable SUPPERPLASTICIZER such as PLASTROCRETEPLUS or ZENTRAMENT FB2 or PERMACRETE or SUPA PLAST or any other chemical similar to the generic name underlined above. The name of chemical to be used in the work and manufacturer's instructions in his printed Catalogue that is SIKA India Pvt. Ltd. The dosage as per manufacturer's instructions in his printed Catalogue that is PLASTROCRETE PLUS of 0.2 percent. Where thickness of repair is less than12mm, repairing will be done by above mentioned mortar. Where thickness of repair is more than 12mm and upto 25 mm, repair will be done using above mentioned concrete. Where thickness is even more, the surface will be repaired by concrete in layers of man. 25mmthickness each. Finally exposed concrete surface to be made smooth and good finished by above cement sand mortar. The rate is including all lead, lift, labour and cost of all chemicals, cement and steel, etc. | Sqm | 20.00 | 441.8 | 8,836 |
| 7 | Rustic plastic on wall surface after removing all moss, mould and algee growth on wall surface, scrapping wall surface to remove old paint, cleaning thoroughly powdered surface, repairing small patches of plastered surface, repairing efflorescence etc and finished surface should not be uneven &materials should be approved before use by Engineer-in-charge. | Sqm | 180.00 | 146.62 | 26,391.6 |
| 8 | Bleaching powder. | Quintal | 30.00 | 2,031.67 | 60,950.1 |
| 9 | Supply of sodium hypochlorite solution (Na0CI) to the site of work for operation and maintenance of WTPT his includes transportation, loading, unloading all labour taxes inspection of materials if required and other incidental charges etc. | Litre | 250.00 | 14.79 | 3,697.5 |
| 10 | Fixing of released permanently colour coated aluminium alloy coated zincalume/galvalume steel sheet with supplying of 8mm dia galvanized J or L hooks and bolts. G.I plain washer and bitumen washer. The sheet to be fixed over the purlins with galvanized 8 mm dia to 125mm long galvanized J or L hooks and bolts, G.I Plain washer (30mm dia and thickness 2mm or above) and bitumen washers on crests of the sheet at sufficient locations for fixing the released sheet properly or as directed by Engineer-in-charge. The rates include the cost of J or L hooks and Bolts, G.I Plain washer and bitumen washers, all laborers, scaffoldings, carrying of materials etc. with all charges. The released sheet shall be supplied from the store of SSE (Works)/ at work site from where it is to be dismantled. | Sqm | 750.00 | 93.03 | 69,772.5 |
| Schedule total | ₹2,25,607.06 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .