WBPWD/SSE/SWEC/NIQ140/2025-26

Supplying and fixing 415 V, 25-32A per way, 4 wayTPN MCBDB with SS enclosure double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 12non SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1 no. 63A FP Isolator, 12 no. (16-32A) SPMCB. (Make-Siemens/ Legrand/ Schneider/L&T/ Havells/ Bentec)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 X 56/0.3( 4 sqmm) + 1 X 36/0.3( 2.5 sqmm) as ECC(From HTPN DB to AC )

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [Make-Precision]

25 mm dia pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable with 2x10 SWG GI wire. [Make -RR Kable/Polycab /Havells/Gloster/ KEI]

b) 4 core 25 sqmm.[Main panel to HTPN]

b) 4 core 16 sqmm.

Laying of cable upto3/4 core 25 sqmm on wall/ surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

b) 4 core 25 sqmm.

c) 4 core 16 sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish.

c) 4 core 25 sqmm

c) 4 core 16 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

b) 4 core 25 sqmm

c) 4 core 16 sqmm

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), with modular type plug top with indicator and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc..

Supplying & fixing sheet metal (16SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. Earthing attachment and painting as required–(As per Drawing no. 470 of PWD Specification Book – May 1991, 4 bar 415A,400A

A.C Machine S & D of 1.8 TR or higher capacity split type room Air Conditioner (cooling only) having the following specification & features:- A) Cooling capacity minimum (BTU /HR): 24000 B) Star Rating -5/3 star; EER-3.88 C) Rated Voltage-230 V+/-5%, Frequency -50 Hz; D) Compressor type- Rotary; E) Mini. Room Discharge Air Flow Rate- 1050CMH; F) Refrigerant: R- 410A/R32; G) Cordless Remote Arrangement with all modernized provision of temperature setting , Fan speed option ( Low /Medium /High ) Auto Swing. (Make :- ( O General/Mitshubishi Heavy Industries/ Mitshubishi Electric ) With 15A plug top, 2mt long input cord , & all other installation kit except indoor to out door unit connecting pipes & cables, out door unit will be fixed on wall with heavy type wall base.Incl supply of wall base./on floor with necessary iron chair (300mm hight). fixed on roof floor.

Supply & Delivery of 1.5 Tr Hi-wall Split Air Conditioner having following specification. Cooling Capacity - 5.2 kW (minimum) ISEER-3.59 (minimum) BEE Leveling : 2-Star or higher (July22-October24) IS compliance - IS 1391 Refrigerant - R410A/ R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: O General/Mitshubishi Heavy Industries/ Mitshubishi Electric )

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.(incl. laboue cess)

Supply and delivery of (I) Copper pipe 3/8"/1/2" for liquid as required. (III) Copper pipe 5/8" / 1/4"for suction as required (IV) Insulation Foam 3/8" / 1/2" for liquid as required. (V) 5/8" / 1/4"for suction as required.

Supply and drawing of Electric cable (3 core 2.5sq.mm)

Supply & Fixing of 25 mm PVC Drain pipe with all other accessories bend, tee, saddle, clamp etc for drainage of water for Split A.C. both indoor and outdoor unit.

Please Enable Macros to View BoQ information