CONSTRUCTION OF SCIENCE LAB., ART CRAFT ROOM,LIBRARY, AND 05 ADDITIONAL ROOMS DOUBLE STOREY(FRAMED STRUCTURE ) SCHOOL BUILDING AT GOVT HIGH SCHOOL KHANATER ZONE KANUIYAN (POONCH)UPGRADED SECONDARY TO HIGHER SECONDARY

Amount

Providing of Geo-technical Investigation by way of Plate Load Test for Determining Safe Bearing Capacity of Soil for design purpose.

Providing of Structural Design from approved consultancy and also to be vetted by GCET/DIQC Jammu

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed.including all lead,lift and carriage.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) crushed including all lead,lift and carriage.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) including all lead,lift and carriage.crushed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying and filling RBM including watering, ramming, dressing and carriage, lead & lift complete job.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) including all lead,lift and carriage.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) crushed including all lead,lift and carriage

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level. including all lead,lift and carriage.

Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars.

Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (under 20 cms wide)

Providing and fixing pressed steel door and windows frames conforming to IS :4351 manufactured from commercial miled steel 1.25mm/ 1.6mm thickness including hings ,jamb , lock, bead and if required angle threshold mild steel angle of section 50x25mm or bace ties of 1.25mm /1.6mm pressed mild steel welded or rigidly fixed togather by mechanical means including M.S pressed but hinges 2.5mm thick with mortar gurdas rock, strike - plate and shocks absorber has specified and applying coat of approved steel primer .

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete fixed to steel windows by welding.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand)including all lead,lift and carriage.

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) including all lead,lift and carriage.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand)including all lead,lift and carriage.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed.including all lead,lift and carriage.

Providing and laying 75mm thick compacted bed of dry brick aggregate 40mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of Engineer-in-charge

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed. including all lead,lift and carriage.

Providing and fixing glass strips in joints of terrazo/cement concrete floor.40 mm wide and 4 mm thick

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge). 35mm Thick 2nd class Deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick 2nd class Deodar wood.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm Sliding Door bolts.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper

Providing and fixing aluminium casement stays lSI marked anodised (anoJic coating not less than grade AC 10 as per IS : 1868) transparent or eyed to required colour or shade with necessary screws etc. complete :

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. crushed including all lead,lift and carriage

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 110 mm diameter.

Providing & fixing electric points complete in all respect as per necessary as site. Complete Job

Abhinav Sudan

AJAZ ANAYAT