Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹32.9 L+₹85,640 (2.68%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹34.5 L+₹2.5 L (7.74%)Accepted-Finance | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | AAYANSH ELECTRICAL SOLUTIONS L3 | PS ELECTRICALS L2 | M/S YASH TRADERS HAPUR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge. | 12 | Qtl. | 300 ₹3,600 Lowest | 500 ₹6,000 | 500 ₹6,000 |
| 2.00 | Carriage of ST Pole 11/13 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge. | 39 | Nos | 1,299 ₹50,661 | 400 ₹15,600 Lowest | 1,000 ₹39,000 |
| 3.00 | Carriage of 400 KVA from Electricity store center, Hapur to site o work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge. | 1 | Nos | 4,500 ₹4,500 | 5,000 ₹5,000 | 4,000 ₹4,000 Lowest |
| 4.00 | Carriage of 33 KV 3x300 XLPE Cable of estimate from JE Store/CTR/ESC, Hapur to site of work, including loading & unloading at both ends, as per direction of site incharge. | 780 | Mtrs | 30 ₹23,400 Lowest | 30 ₹23,400 Lowest | 40 ₹31,200 |
| 5.00 | Carriage of 33 KV metering cubical of estimate from JE Store/CTR/ESC, Hapur to site of work, including loading & unloading at both ends, as per direction of site incharge. | 1 | Nos. | 2,000 ₹2,000 Lowest | 6,000 ₹6,000 | 6,000 ₹6,000 |
| 6.00 | Erection of Four-pole structure on ST Pole 13 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, and as per direction of site incharge. All Clamp & Nut bolt will be provided by contractor. | 2 | Nos. | 5,900 ₹11,800 Lowest | 16,000 ₹32,000 | 8,000 ₹16,000 |
| 7.00 | Erection & Fixing of ST Pole 13 mtr. long in 33 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, as per direction of site incharge. | 2 | Nos. | 2,500 ₹5,000 Lowest | 4,000 ₹8,000 | 6,000 ₹12,000 |
| 8.00 | Erection & Fixing of STP Pole I I mtr. long in I l KV line along with X-Arm and pin insulator after digging o suitable pits including fixing of requisite all accessories as per RESPO Drawing norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge. | 13 | Nos | 2,500 ₹32,500 Lowest | 3,500 ₹45,500 | 4,000 ₹52,000 |
| 9.00 | Erection of double pole structure on ST Pole I I mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E Bracket, I l KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/ Norns by providing all clamps made of M.S. Flat o size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge. All Clamp & Nut bolt will be provided by contractor. | 4 | Nos | 4,500 ₹18,000 Lowest | 9,800 ₹39,200 | 6,000 ₹24,000 |
| 10.00 | Errection of 33 KV metering cubical of estimate as per direction of site incharge. | 1 | Nos. | 2,500 ₹2,500 Lowest | 5,000 ₹5,000 | 5,000 ₹5,000 |
Tender Value
₹38 L
EMD Value
₹38,000
Closing Date
6 Oct 2025, 12:00 pmClosed
SUPERINTENDING ENGINEER
SUPERINTENDING ENGINEER EDC HAPUR
FOR EXTERNAL ELECTRIFICATION WORK UNDER THE PRIME MINISTER HOUSING SCHEME IN HINDALPUR, SHIFTING OF 33KV MAV FOR IMPROVING SUPPLY, SHIFTING OF 33 KV MAV MASOORI GULAOTHI ROAD IN DEPOSIT SCHEME IN THE JURISDICTION OF EDD-PILKHUWA UNDER EDC HAPUR.
2025_PVVNL_1076635_1
38(W)/EDCH/2025-26
Open Tender
Electrical Works
Item Wise
HAPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER, EDC, HAPUR
₹38,000
Yes
13 Oct 2025
23 Sept 2025
6 Oct 2025
23 Sept 2025
6 Oct 2025
23 Sept 2025
Amount
Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Carriage of ST Pole 11/13 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Carriage of 400 KVA from Electricity store center, Hapur to site o work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Carriage of 33 KV 3x300 XLPE Cable of estimate from JE Store/CTR/ESC, Hapur to site of work, including loading & unloading at both ends, as per direction of site incharge.
Carriage of 33 KV metering cubical of estimate from JE Store/CTR/ESC, Hapur to site of work, including loading & unloading at both ends, as per direction of site incharge.
Erection of Four-pole structure on ST Pole 13 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, and as per direction of site incharge. All Clamp & Nut bolt will be provided by contractor.
Erection & Fixing of ST Pole 13 mtr. long in 33 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, as per direction of site incharge.
Erection & Fixing of STP Pole I I mtr. long in I l KV line along with X-Arm and pin insulator after digging o suitable pits including fixing of requisite all accessories as per RESPO Drawing norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.
Erection of double pole structure on ST Pole I I mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E Bracket, I l KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/ Norns by providing all clamps made of M.S. Flat o size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge. All Clamp & Nut bolt will be provided by contractor.
Errection of 33 KV metering cubical of estimate as per direction of site incharge.
Carriage of 33 KV CT/PT Units Outdoor of estimate from JE Store/CTR/ESC, Hapur to site of work, including loading & unloading at both ends, as per direction of site incharge.
Errection of 33 KV CT/PT Units Outdoor of estimate as per direction of site incharge.
Erection of double pole structure on ST Pole 11 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, E-Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, and as per direction of site incharge. All Clamp & Nut bolt will be provided by contractor.
Laying, Stringing and final sagging of ACSR Dog Conductor, as per RESPO/Drawing Norms and as per direction of site incharge
Safely installing transformer with the help o crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction o site incharge.
Digging of earth and refling with road restoration Kaccha/footpath charge as per RESPO/Drawing Norms. (The Firm will bc fully responsible for this work and taking necessary permission), as per direction of site incharge
Laying of 11KV XLPE Cable 3x120 sqmm with bricks and sand belove 0.75 mtr earth completion work properly, as per RESPO/Norms, and as per direction of site incharge.
Laying of LT PVC Cable 3.5x400 of various capacity and completion work properly, as per RESPO Norms, and as per direction of site incharge.
Erection & Fixing of Distribution Box on pole by providing 02 Nos. DIB Clamps & proper size nut & bolts, as per direction of site incharge.
Grouting & fixing of stay rods (20x1800)mm including all work o excavation, cement concrete in size (0.60x0.60xO.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.
Earthing of supports with MS earth Rod of (20x2500) mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.
Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballst) Grouting will be done in the block of size (450x450)mm xl/6th o full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge
Providing & Wrapping of barbed wire on 11KV ST poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P., as per direction of site inchargc.
Manual digging & laying Single/Double Circuit of 140/160mm O/D PN-6PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe, as per direction of site incharge.
Laying of 33KV XLPE Cable 3x300 Sqmm, undergound (Single/Double Circuit) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms and as per direction of site incharge
Making and filling of 33KV Cable Jointing Kit 3x300Sqmm, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge.
Dismantal of old ACSR Conductor & Bundling of its as per RESPO Norms, and as per direction of site incharge.
Dismantling of old & used STP and opening of all accessories, including carriage of above material form site of work to JE Store/ESC-Hapur, with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Carrage of old & used conductor and opening of all accessories. (Iron/steel Scrap 341 Qtl., Conductor-83 Qtl, Meltable scrap 18 Qtl. including carriage of above material form site of work to JE Store/ESC- Hapur, with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing Norms by providing holding 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge.
Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO[Drawing Norms and as per direction of site incharge.
Dismantling of existing 33 KV Line and old & used conductor and opening of all accessories. (Iron/steel Scrap 500 Kg., Conductor-110 Kg, including carriage of above material form site of work to JE Store/ESC- Hapur, with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Providing Red Oxide paint & Painting of 11/13 Mtr ST supports its as per RESPO/Norms and as per direction of site incharge.
Providing alluminium paint & Painting of 11/13 Mtr ST supports by its as per RESPO/Norms and as per direction of site incharge.
Providing & Fixing of (3.1. pipe 6"dia Class-B over 33KV or 11KV 3X70 and 3x120Sq.mm or 3x300sq.mm. XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be buried under carth about 500mm each including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.
Trenchless laying (215x2=430 Mtr). Double Circuit) of 140/160mm O/D PN-6PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe, as per direction of site incharge.
Construction of TIF plinth suitable for 400 KVA (size of 2x2x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:4:8 (Cement, Sand & Brick ballast). 1st class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 are duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour, as per direction o site incharge.
Erection & Fixing of 11KV. Fuse set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge.
Erection & Fixing of 1 IKV. TPMO set on STP/PCC Pole, by providing all required fixing materials as per RESPO Norms and as per direction of site incharge.
Construction of safety fencing (MS) for Transformer 11/0.4 KV Sub Station, With supply of material required for MS fencing (50X50X3 MM) M.S. wire mesh construction utilizing vertical post duly grouted/fitted in ground/on floor. Horizontal anglen-iron to be fitted on vertical posts. Pickets (i required) fitted to rail and gate to facilitate entry and exit. The vertical Posts/Horizontal post shall be made of M.S. angle 75x75x6mm. Such post shall be kept preferably at distance of 800-1000 MM. and shall be grounded with CC ratio 1:4:8. The length of vertical post shall be sufficient to take care of fencing as requirement at site, and as per direction of site incharge.
Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.
Providing & Fixing of Number Plate alongwith all required accessories (like suitable clamps, nuts & bolts etc) as per RESPO/Drawing Norms and per direction of site incharce.
Providing and installation of maintenance free multifaceted proactive and corrosion free chemical earthing electrode size 80mm x 3000mm complete with 50KG backfill compound with all required accessories for Body/neutral earthing of Transformers, including cost of M.S. carth strip for connection the earth strip will be soiled to the earthing and neutral support, as per RESPO Norms and as per direction of site incharge.
Jumpering and line energisation work properly as per RESPO Norms and as per direction of site incharge.
Providing & Fixing of Stone Pad 300x300x75 mm as per RESPO/Drawing Norms and per direction of site incharge.
Providing of Al Lugs of T/F
Porviding Fixing of complete LT Pannel with arrangement of LT MCB and Bus Bar for 24 Nos cable service
Providing Bakelite and fixing consumer end for meter installation
M.S. T-Off Chennel as per RESPO/Drawing Norms and per direction of site incharge.
Providing and errection of 4 core LTC MCB 630 Amp or above.
Providing and Fixing LT incoming pannel
Porviding distribution box complte arrangement with copper bus bar 50x100x6 mm complete with AL thimble/Lugs.
PS ELECTRICALS (BID ID -5571574)
AAYANSH ELECTRICAL SOLUTIONS (BID ID -5571522)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .