RF - 2025-26

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Supply delivery erection ,commisioning, testing and handing over of of 25KVA capacity Deisel Generator set With acoustic enclosure conforming to CPCB IV+ Norms and BIS Specfication. with AMF Panel 3 ph, 50 Hz,415 V, 1500 rpm with AMF panel as detailed below consisting of deisel engine capable of delivering Water Cooled Engine suitable for generator application with a shaft output of 43BHP at 1500rpm under NTP conditions as per BSS 5514/IS 10000. The Engine shall comprise the following standard scope of Supply (Kirloskar/Ashok Leyland/Equivalent) 1.Oil type Cleaner 2.Expansion below 3.Radiator,Radiator Fan and Mounting 4.Air toAir Charge Cooler 5.Exhaust gas turbo Charger 6.Lube oil coller and Lube oil filter 7.Fuel filter (Pre and Micro) 8.In-Line Mono block fuel injection pump with governer and fuel feed Pump 9. Electronic governor 10.12V battery charging Alternator 11.12 Bolt Electric starter motor 12.Engine test certificate 13.residential Muffler 14. Fly Wheel with starter ring. (PWD SOR PG NO: 268)

Supplying, Delivery and fixing of 63 Amps Three Phase 500V 4 Pole Change Over Switch includin all cost of materials and other charges etc complete complying with standard Specifications

Supplying and fixing of Armounded Aluminium Conductor Cross Linked Poly Ethylene Insulaated PVC Sheated 4 core 16sq.mm cable cofirming to IS 7098 (Part I) / 1988 and AND AS AMENDED THEREAFTER with ISI including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification.

Goods and Service Tax @ 18%

KUPPUSAMY SANKAR (BID ID -1472319)