CONSTRUCTION OF BHAIRUNALA HARIJAN BASTI COMMUNITY HALL IN WARD 09

DISMANTLING STONE SLAB FLOORING LAID IN CEMENT MORTAR INCLUDING STACKING OF SERVICEABLE MATERIAL AND DISPOSAL OF UNSERVI

1:3:6 OR RICHER MIX

ORDINARY ROCK

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN

ADD EXTRA FROM ITEM NO. 6.8 & 6.9 IF MORTAR USED 1:4 INSTEAD OF 1:6.

1:4 (1 CEMENT: 4 SAND)

RED SAND STONE:

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"PN - 10 PIPE, 110 MM OD (SDR - 11)"

"PN - 10 PIPE, 160 MM OD (SDR - 11)"

KOTA STONE 25MM THICK FLOORING OVER 20 MM (AVERAGE) THICK BASE LAID OVER AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH

1:3:6 OR RICHER MIX

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"WALLS (ANY THICKNESS) INCLUDING ATTACHED PILASTERS, BUTTERESSES, PLINTH AND STRING COURSES ETC"

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

RED SAND STONE:

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTIONS, TRUSSES AND FRAMED WORK, INCLUDING CUTTING, HOIST

PROVIDING AND APPLYING PLASTER OF PARIS PUTTY OF 2 MM THICKNESS OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND S

NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL

PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/

TWO OR MORE COATS ON WALLS APPLIED @ 1.25 LTR/10 SQM. OVER AND INCLUDING ONE COAT OF SPECIAL PRIMER APPLIED

PROVIDING AND FIXING ANODISED ALUMINIUM (ANODISED TRANSPARENT OR DYED TO REQUIRED SHADE ACCORDING TO IS:1868. MINIMUM AN

POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POWDER COATING 50 MICRON)

WITH FLOAT GLASS PANES OF 5.50 MM THICKNESS

AREA OF SLAB UPTO 0.50 SQM

ELECTRIFICATION WORK

SANITARY WORK