WBPWDTE/AE/BESD-II/e-NIQ 02 of 2024-25

Amount

providing CC (6:3:1) base block (around the pole) dimension 0.45 x 0.45 x 0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box G.S [H-1(3-b-2)]

Supply and Fixing of LED Street Light(230V AC,70 w ,5500K,IP 66,THD<10%,bult in 2.5KV SPD) with all necessary connection.(Cat No. TRP-409-70-57-SL-GL-NSG) [Make:Philips,Crompton,Wipro, Surya]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply and drawing of 3 Core 1.5 Sq.mm Copper unarmoured cable. Connection from Pole to light fixtur Make: (R.R./ Polycab/Gloster/RR Kabel)

Supplying of 1.1 KV grade following Al. armoured PVC/XLPE (Havells/ Glostar/ KEI/ PWD Appvd ) as per direction of EIC 4 core 16 sqmm (for Street light )

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sqmm [F-4/c]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 16 sqmm [F-5/b]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm dia [F-6/11]

Painting of Steel Tubular Pole of 9 mtr length and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint upto 9 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Painting of single Steel arm bracket of 1.5 mtr lengths and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Supply and fixing of Gate Top LED light fitting 40W compl. With all accessories to be fixed on G I pipe on entry Gate of Morgue and making neccy. Connection as per direction of EIC. Make-Crompton,Philips,Wipro,Surya or as per direction of EIC (Cat No-CBP-610-40-57-SL-CA-NBK)

Supplying and fixing of 415 V AC timers fixed on wall with flat iron frame as per direction of EIC and the Box shuld be comprising with the following accessorise --- i) Double-door Board – 1 no ii) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC / Legrand ) – 1 no iii) 250 V, 50 Hz , 40 Amp TPN Conctractor with ( 2 NO or 1 NO + 1 NC Aux. Contract ) ( Make - Legrand / L & T ) – 1 no iv) 250 V, 50 HZ , 40 Amp , TPN MCB Isolator ( Make - Legrand / L & T ) – 1 no v) Auto / Manual By pass Toggle Switch arrangement – 1 no. vi) 250 V , Diode type neon Indicator lamp ( Make - Legrand / L & T ) – 1 no vii) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power . viii) The complete arrangement must be wiring by 2.5 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (for controlling outdoor street light fitting (Make - Legrand /L & T / Crabtree )

MAGNET ELECTRIC WORKS (BID ID -5590064)

BISWAJIT CHOWDHURY (BID ID -5590083)