Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹10.8 L
EMD Value
₹22,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE 861 EWS
GE 861 EWS
SPECIAL REPAIR TO REPLACEMENT WIRING AND FITTING FIXTURE INCLUDING FANS AT BLDG NOS. T-10 T-35 T-57 AT SHER-E SHALI GRN AGAINST JOB NO.W/SR (E/M)-14 KHREUH/2025-26 AND SPECIAL REPAIR TO BUILDING NO T-36 (OR BATHROOM) AT SHER-E-SHALI GRN AGAINST J
2026_MES_797954_1
GE 861 EWS-67(T)/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per NIT
8 documents required · 8 mandatory
₹500
GE 861 EWS
₹22,000
GE 861 EWS
9 Nov 2026
9 Nov 2026
4 Dec 2026
9 Nov 2026
1 Dec 2026
24 Nov 2026
14 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down cement or cement lime plaster from brick wall or concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge. | 107.2 | Sqm | - | - |
| 2 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. | 5.58 | Cum | - | - |
| 6 | Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (as approved by Engineer-in-charge) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.
Note:-
(i)Wire gauze / glass shall be measured and paid separately under appropriate items of Schedule 'A' BoQ.
(ii) Butt Hinges, Tower bolts, Handles , sliding door bolts , ordinary rat tail pattern springs and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.
(iii) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge.
(iv)Primer shall be measured paid separately under appropriate item of BOQ. | 4.65 | Sqm | - | - |
| 7 | Supply & Fixing Solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge.
Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. | 57.6 | RM | - | - |
| 8 | Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engineer-in-Charge. | 19.2 | Sqm | - | - |
| 9 | Supply and Fixing aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) (ISI Marked ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engineer-in-Charge. | 12 | Each | - | - |
| 10 | Supply and Fixing 200mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. | 14 | Each | - | - |
| 11 | Supply and Fixing 150 mm long Extruded aluminium alloy handles, fabricated type,anodised (ISI Marked ) as specified and directed by Engineer-inCharge. | 24 | Each | - | - |
| 12 | Supply and Fixing Butt hinges size of 75mm , medium weight cold rolled mild steel (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. | 36 | Each | - | - |
| 13 | Supply and Fixing Mild steel 300mm size ordinary rat tail pattern springs (ISI Marked ) including roller and roller plate complete all as specified and directed by Engineer-in-Charge. | 12 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
Tender67T.pdf
Tender Documents • 1.13 MB
BOQ_895134.xls
BOQ • 10.37 MB
Credit67T.pdf
Additional Documents • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .