Seda Singh Wala

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 80 km 6km to 40 km

41km to 60 km

61km to 80 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 245 km 6km to 40 km

41km to 60 km

61km to 150 km

151km to 245 km

4.1+5.2/Carriage of earth and Stone sand, earth, fly, ash, bajri, shingle, spals, brick blast etc. 6km to 40 km

6.2/Earth work excavation in ordinary soil, exclusive of compensation of earth :-- (g)/Compaction :-- (i)/Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

(ii)/Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

6.8/Earth filling under floors and ar fixed the tank with surplus ordinary soil etc.

8.5/Dismantling Brick work tile mesonary or tile lining (b)/in Cement

8.31/Scraping cement Plaster inside Tank

13.13/Terracing consisting of tiles 22.86x11.43x3.81cm laid over 25mm mud plaster, 75mm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot @ 1.65kg/m² on top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left cleaned after wire brushing etc.

13.45/Top Khurra 0.6x0.6m for rain water pipe in 25mm thick CC 1:2:4 over 50mm thick CC 1:8:16

14.10/Conglomerate floor 50mm thick CC 1:2:4 on 100mm CC 1:8:16 and 100mm sand or stone filling

15.6-15.3/Extra for additional 4mm thick cement plaster in 1:5 on LDPE film in Bed

15.7+15.48/12.5mm thick cement plaster in 1:2 inside with cement rendering on plaster 1mm thick

15.65/Striking joints in lime or cement on brick walls

17.10(iii)/Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.

19.2/Dressing side slopes and preparation of sub grade for lining.

28.2+28.13+28.18(xii)/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2 (xii)/63mm o/d pipe of 6 Kgf. / sqcm

(xiv)/90mm o/d pipe of 6 Kgf. / sqcm

28.7 A/Providing, Stringing out, cutting, Jointing and testing of ISI Marked C.I. Pipes Class-LA per IS:1536 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage. (c) /150mm i/d pipe lines laid complete

28.27 A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a)/80mm i/d Sluice Valves flanged

(b)/100mm i/d Sluice Valves flanged

(c)/150mm i/d Sluice Valves flanged

28.24/Supplying and laying C.I. specials as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications. Note: If C.I specials of ISI Marked is used instead of specials confirming to ISI Specifications , than 10% extra on rates of this item will be paid. (a)/C.I. specials upto 300mm i/d

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a)/Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.66/Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b)/Size 0.90 m. x 0.90 m.

28.90/Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

29.26/First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

33.14/COPPER EARTHING: A/Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 20 mm x 3 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 4 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 7 metre in length (including bore length). G.I. pipe 20mm dia. (A- class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.

NS/Providing and placing black LDPE film 250 thick (confirming to B.I.S. 2508/1984 revised up to date amendments) on side slopes and in bed including sealing overlaps as per industrial best practice ( keeping minimum overlap 45cm wide)

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)/Top Layer

NS/Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 160mm o/d PVC pipe of 10 Kgf. / sqcm

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Providing and fixing iron foot steps for Filter Beds

NS/Providing and fixing Air vent cowl 150 mm

NS/Providing and fixing Ceiling Fan

NS/Providing and fixing CFL (23W)

NS/Providing & Fixing M.S. ladder of required length and design

NS/Providing & Fixing Ventilator Grill (Jaali)

NS/Provision for G.I. Pipe Railing

NS/Repair of Shunt Capaistor, starter, Main Switch etc. in Control Pannel

NS/Supplying and fixing 150 mm i/d Galvanized iron sheet floating arm of 4.30 mtr with Sluice Valve complete.

NS/Supplying and fixing 200 mm i/d Galvanized iron sheet floating arm of 4.50 mtr with Sluice Valve complete.

NS/Providing & streching Barbed wire 3 ply including cost of binding wire and aluminum painting complete in all respects.

NS/Construction of corner pillar complete in all respects

NS/Repair of Sand Washing plateform

NS/Construction of Toilet (with septic tank) for Water works staff at Water works site.

NS/White washing of all structures

NS/Credit of Old Sluice Valves