REPAIR MAINTENANCE OF SWH, SUMMER AND COOLING APPLIANCES AT TAKU AREA CPE ITARSI UNDER GE BHOPAL

Taking down carefully Geyser of capacity 25/35 ltrs from its position for repair/servicing such as removal of dust, checking, replacing worn out parts, rubber etc, re-assembling at its position after repair, testing & commissioning & connecting to electric system with suitable size cable, complete all as specified & directed. Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Supply & fixing galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., , fixed complete to walls and ceilings or laid in floors, complete including taking down complete all as specified & directed.

Supply & fixing galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., , fixed complete to walls and ceilings or laid in floors, complete including taking down complete all as specified & directed.

Supply & fixing geyser tank of capacity 25 ltrs, SS body, complete all as specified & directed.

Maintenance for operationaly fit of RO based aqua guard installed for water cooler , with replacement of candle, Replacement of Membrane, Replacement of Pree filter candle, Replacement of Diaphragm Pump 24 volt DC and open flow minimum 2.0 Ltr/min checking of AC supply circuitary of aqua guard and made functional, replacement of step down transformer 230 volt to 12/24 volts, as per sample, incl servicig of RO complete all as specified & directed.

Supply & fixing heating element for geyser, 1500 watt, ISI marked , round type, complete all as specified & directed.

Supply & fixing heating element for geyser, 2000 watt, ISI marked,round type, complete all as specified & directed.

Supply & fixing heating element for geyser, 1500 watt, ISI marked,triangle type, complete all as specified & directed.

Supply & fixing heating element for geyser, 2000 watt, ISI marked,triangle type, complete all as specified & directed.

Supply & fixing thermostat suitable for geyser of any capacity, complete all as specified & directed.

Supply & fixing Angle stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed & directed.

Supply & fixing Bib tap, 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repair, complete all as specified & directed.

Supply & fixing stainless steel connection 15mm dia, 900mm long with brass CP nuts and washers at both ends for hot water & Cold Water , fixed in repair, complete all as specified & directed.

Taking down/out Deepfreezer/Refrigerator transporting to contractor's workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, re-fixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection and testing, complete all as specified & directed. Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Taking down/out Water Cooler of 40/80 ltrs and 60/120 ltr capacity transporting to approved workshop for carrying out repairs, taking out assembly, welding/brazing after detecting the leakage, as mentioned in respective items of Schedule including transporting back after repair, refixing at site, making it functional after replacement of worn out nuts, bolts, washer etc. including re-connecting electrical connection testing complete all as specified & directed. Note :- Cost of material and labour for providing new items shall be measured and paid for separately under relevant items of Sch 'A'.

Supply and fixing in replacement of following unserviceable items of Deepfreezer/refrigerator of any capacity as required at site including testing of the same, complete all as specified & directed :-

MS condensing coil with fixing arrangement for 300/310/320 litres capacity complete with gas charging.

Over load protector.

Thermostat switch (Auto defrost).

Temp control knob with defrost push button.

Electrical lamp pin/threaded type 15 watt, 240 volts AC supply.

PVC ice tray of superior quality.

Relay as per existing.

Supply, fixing and testing new compressor, single phase, 240 Volts, AC supply in replacement including cost of rubber bushes, bolts, nuts washers, copper tubing capillary tube, dryer filter terminal cover, thimbles, electrical wiring oil and gas charging (R-134 or as recommended by manufacture) and testing complete for the following including transportion etc complete all as specified & directed. :-

Compressor of Deepfreezer/Refrigerator of cap 300/310 Ltr.

Compressor of Water Cooler of capacaity 300/310 Litres.

Supply and fixing in replacement of following unserviceable items by opening of water cooler of 40/80 or 60/120 Ltrs capacity frost free for following replacement of unserviceable accessories and refixing, connecting and testing complete all as specified & directed :-

Copper Condensing coil complete with fixing arrangement.

Fan motor 1/2 HP, 240 volts, single phase AC supply.

Aluminium Blade for fan motor complete blower.

Thermostat.

Relay as per existing make.

Over load protector.

Float Valve brass 15 MM bore.

Push type tap 15mm bore, brass chromium plated

Supply and filling/charging of following water collers/Deepfreezer with refrigerant R-22A/R-134 or as recommended by manufacturer including flushing out oil, vacuming, top up oil, brazing, leak detection, testing etc for following cooling appliances including replacement of capillary tube and dryer filter complete all as specified & directed. :- Note:-. The type of refrigerant gas shall be charged as per manufacturer recommendation.

Water cooler 60/120 litres capacity.

Deep Freezer/Refrigerator of capacity up to 320 Litres.

Supply and Replacement/repair of voltage stabilizer of capacity 5 KVA installing and testing complete all as specified and directed.

Taking down defective Split/Window AC of 1.5 Ton capacity from any height and any places for repair and refixing at its original place after replacement of defective/wornout parts & making serviceable, complete all as specified & directed. Note:- Worn out spares parts required for making AC serviceable/functional shall be measured and paid separately under appropriate item as 'Supply only'.

Supply only fan motor for 1.5 ton AC.

Supply only AC compressor for 1.5 ton AC.

Supply and charging gas 22 R for 1.5 ton AC.

Supply only AC copper pipe of size 8mm and 15 mm for 1.5 ton AC.

Supply only 45 Mfd capacitor for 1.5 ton AC.

Supply only contactor, single phase, 30 Amp for 1.5 ton AC.

Supply only fan belt for 1.5 Ton AC.

Supply only printed circuit board of split AC/Window AC 1.5 ton

Over load protector.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as specified and directed.

Supply, Install, Testing and Commissioning of ‘SOLAR WATER HEATER SYSTEM' (Evacuated Tube Collector) based on direct transferring of heat of capacity 100 LPD including protection of monkey caging frame made of good quality steel angles and wire mesh complete all as specified and directed.

Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 ltr Eco-friendly Refrigerant, Anti-corrosive Pre-coated Body, Longer Cooling Retention, including all connecting accessories as shown complete all as specified and directed.

Supply only bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs, heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs, working in R - 134a refrigerant complete all as specified and directed.