SPECIAL REPAIR TO BLDG NO T 408 OR LINE AT 194 FD WKSP COY 14 SRW AT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F of anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) fabricated works as in doors, windows, ventilators, partitions shutters and frames,with or without sash bar including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, necessary fittings/accessories etc. complete all as specified and directed. Note: Rates are inclusive for necessary new fittings for door/window i.e handle, tower bolts, butt hinges, filling of gap between wall and window by silicon gel etc complete.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws with and including 100mm long stainless steel butt hinges complete all as specified and directed.

S&F of factory made 100% solid PVC flush shutter 28 mm thick, made from co-extruded three layer rigid PVC foam sheet (single extruded) with density not less that 600 Kg/Cum, outer layer 0.8-1 mm thick shall be of rigid PVC with density of not less than 1400 Kg/Cum, water proof, termite proof, fire retardant & having good screw holding capacity complete all as specified and directed.

S&F for factory made 30mm thick 100% Solid WPC (Wood polymer Composite) laminated wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), calcium carbonate and natural fibers (Wood powders/ rice husk/ wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 Kg/Cum, having good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compissive of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free, water/ moisture proof and fire retardant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter, for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered PVC edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed.

S&F of factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 125x65mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fib (wwod powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame densit of 750 kg/cum screw withdrwal strenth of 2200 N (Face) and 1100 N (Edge) minumum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/ lug/ SS dash fasterrs of required dia and length complete all as specified and directed.

S&F of factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fib (wwod powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame densit of 750 kg/cum screw withdrwal strenth of 2200 N (Face) and 1100 N (Edge) minumum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/ lug/ SS dash fasterrs of required dia and length complete all as specified and directed. Note for item No. 4 to 8: Material test certificate and authentication of manufacturing company shall be provided by the contractor.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks, lintels, cills, steps, seismic and other similar bands, kerbs, coping, benching and like etc complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, joints of wall and roof sheets and similar works with and including using liquid WPC as per manufacturer instructions complete all as specified and directed.

S&F of mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, medium weight and fixed to chowkhats with screws complete all as specified and directed.

S&F of 150 mm long stainless steel handles of 10mm dia and fixed to doors with screws complete all as specified and directed.

S&F of 150 mm long stainless steel barrel tower bolts of extruded section and fixed with screws complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20 mm thick granite stone work (any type) (table rubbed and polished) over and including 15mm thick screed bed in CM 1:4 as in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including bullnosing of exposed edges complete all as specified and directed.

M&L for machine cut kota stone slab flooring of size 1200 x 600 mm & 20 - 22 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick screed bed in CM 1:6 and making the edges bull nosed including rubbing and mirror polishing complete all as specified and directed.

M&L for machine cut Kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick rendering in CM 1:4; jointed with grey cement slurry mixed with pigment to match the shade of the slab including making the edges bull nosed and rubbing and mirror polishing complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough flat concrete surfaces complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced) and paving n exc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the permises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8 mm thick (square/rectangular) joint free, area of each tile exc 0.11 Sqm and n exc 0.18 Sqm, in floors etc; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick in vertical surface such as dados, skirting etc; set and jointed over and including 10 mm thick rendering in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

S&F for wire netting of galvanised steel wire 1.40 mm dia fixed with tinned tacks of wire staples size of mesh size 12 mm for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement using water proofing compound as per manufacturer instructions complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newly plastered surfaces of walls complete all as specified and as directed.

M&L for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved shade and colour complete all as specified and directed.

M&L for applying of 1.5 mm thick white wall care putty on walls, finished even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F of 4.00 mm thick sheet glass, ordinary quality in square exc 0.5 sqm in each pane and fitted to aluminium frame work complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod of stainless steel pipe with and including fancy type brackets, stops, rollers etc; fixed on walls with screws complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, fancy type, cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel soap dish, any type, fixed to plugs with brass screws complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in repairs vitreous china WC squatting pan "Orissa Pattern" size 580 x 440 mm, white with integral foot rests including provn of cement concrete bedding and 'P' or 'S' trap as required and connection to trap and to flush pipe, anti syphonage pipe, etc. including making good to floor complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32 mm dia flush pipe with and including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections and fixed complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) but including CP urinal spreader, waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repairs vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed complete all as specified and directed.

S&F in repairs stainless steel grating doom 100 mm dia with or without waste hole complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F of 75mm bore PVC (SWR) floor/ nahani trap, plain with grating including jointing with solvent cement complete all as specified and direcetd.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe 15mm bore complete all as specified and directed.

S&F in repairs stop valve (concealed type) cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy, chromium plated with capstan head, screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F of 15 mm bore long body bib taps, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

Taking down up and down steel tubing 15mm bore of any description complete all as specified and directed.

S&F of 15 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down up and down steel tubing 20 mm bore of any description complete all as specified and directed.

S&F of 20 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers and set in CM 1:4 complete all as specified and directed.

Excavation in trenches n exc 1.5m deep and n exc 1.5 m wide for foundation etc and getting out in hard/dense soil complete all as specified and directed.

Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150mm bore RCC drain pipes, NP-2, laid in trenches and jointed in cement mortar 1:3 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into existing manholes/septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) smooth finished and reforming benching as required for dia 150 mm complete all as specified and directed.

Returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 500 m but n exc. 1000 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors and jointed in solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps and jointed in solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed in solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends and jointed in solvent cement complete all as specified and directed.

S&F of PVC (SWR) vent cowl 110 mm complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections) including necessary welding, bolting, reviting etc. as required at site of steel Fe 410-W (Gde E-250 quality) complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of wall and celing hard boards/ sheets and plywood of any thickness and in any position including cover fillets complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm using 24 x 38 x 0.50mm (composite thickness) tee (bottom precoated) and 24 x 24 x 0.50mm (composite thickness) wall angle including hangers of 6 mm dia. G.I. wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. Make : Gabson or equivalent as approved by GE.

M&L for gypsum board 12mm thick as in false ceiling fixed with screws to snap grid frame work complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick sheet and all around side faces is covered with decorative lipping as in cup board/ cabinet shutter and shelves and fixed with wooden frame-work complete alll as specified and directed.

S&F for 2nd class hard wood plain fillets. square, rectangular or triangular in section of crosss sectional area exc 13 but n exc 25 sq cm, clean sawn and secured with nails or brads complete all as specified and directed.

S&F for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inchs, brass finish of 90 Degree opening angle silver colour and fixed to cubboard (set of two) complete all as specified and directed.

S&F of brass drawer/cupboard pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long fixed with nuts, screws and washers of brass polished, bright finished and fixed complete all as specified and directed.

S&F of mortice lock, brass 4 levers vertical type, size 100 mm and fixed with screws complete all as specified and directed.

M&L for 100mm thisk PCC in 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, hard standing and similar work; finishing concrete surface even and rough complete all as specified and directed.

M&L for clan dry sand cushioning for laying of interlocking paver block in layers complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments to match with existing complete all as specified and directed.

Dismantling of water storage tanks of capacity exc 1000 ltrs but n exc 2000 ltrs complete all as specified and directed.

S&F of 2000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layers, hoisted and fixed in position as specified in SSR Part I with and including 20mm dia PTMT ball brass valves with polythene float and flynut complete all as specified and directed.

Taking down up and down steel tubing 25 mm bore of any description complete all as specified and directed.

S&F of 25 mm bore steel tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 20 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

S&F in repairs 25 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including modular sunk sheet steel terminal box concealed in wall for mounting of modular fittings like switches, sockets, fan regulators etc. fixed with screws complete all as specified and directed.

(a) One light /Fan/Exhaust/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 109 here-in-before but wiring with 2.5 Sqmm FRLS multi stranded copper conductor cable for one 5/15 Amps socket outlet controlled by one switch on independent board and 2 Sq mm FRLS PVC insulated multistranded copper conductor cable as continuous earth wire complete.

S&F of ceiling rose surface bakelite two to three terminal complete all as specified and directed.

S&F of lamp holder of polycarbonate body with back plate with and including 9/10 Watt LED bulb complete all as specified and directed.

S&F of modular switch, 1 way, 6 A, 240 V, 1 module complete all as specified and directed.

S&F of modular socket, 6 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular switch, 1 way, 16 A, 240 V, 1 module complete all as specified and directed.

S&F of white cover plate with frame, 2 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 4 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 6 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 8 module and fixed complete all as specified and directed.

M&L for sub main wiring with two single core 4 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring and 4 Sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 4 Sq mm copper conductor cable, one run of 4 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring with two single core 6 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring and 6 Sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 6 Sq mm copper conductor cable, one run of 6 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

S&F of LED tube light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size from ceiling rose complete all as specified and directed.

S&F of LED light fitting, mirror type with high output diffuser, 2 feet long, 10 W, 220 V, AC decorative type with driver holder and LED lamp including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size complete all as specified and directed.

S&F of automatic touchless soap dispensor, 1000 ml disigned with an in-built infrared sensor runs on C-type batteries or 6 Volt 1 Amp DC Adapter etc; including making necessary connections complete all as specified and directed. Make: Wonderchif/ Kent/ Jaquar as approved by GE.

S&F of automatic high speed hand dryer machine infrared sensor based ABS material, 220-240 Volts, commercial type of 1500 Watt with water proof protected class, air temp 54 C, 10-15 sec drying time etc; including making necessary connection complete all as specified and directed. Make: Dolphy/ Orchid/ Euronics as approved by GE.

S&F of LED solar street light fitting 12 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and directed. Make: Havells/ Philips/ Bajaj as approved by GE.

S&F in repairs sheet metal enclosure, TPN, 4 Way, double door as incomer (Vertical type double door) with 200 Amps rated bus bar, suitable to fix SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP-43 and making necessary connections complete all as specified and directed.

S&F of RCBO, 4 Pole, 30 mA, 63 Amps and making necessary connections complete all as specified and directed.

S&F of MCB, SP, 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size copper lugs complete all as specified and directed.

S&F of ceiling fans complete with blades, down rods and accessories of 1200 mm sweep, 165 - 285 V, min air delivery 224 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) with and including hook for hanging ceiling fan complete all as specified and directed.

S&F of 300mm sweep exhaust fan made of powder coated steel with blades, frame and louvers shutter, voltage 230 V, 50 Hz, 1200 RPM and making necessary connection with flexible cable of required size complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground vertically at a depth not less than 2.25 m and top edge of plate at a depth not less than 1.50 m below GL, connected to earthing lead of galvanized steel wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel from earth plate to test point upto 7.5m including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 15 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing compelete all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

S&F of electric water heater stoarge type of 25 litres capacity of steel body with copper inner tank and heating element up to 2 KW capacity, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection pipe (02 Nos) complete all as specified and directed.

S&F of steel body desert cooler electric driven (single phase) fabricated of 1 mm thick GI sheet and having nominal air flow 18" heavy propellor type ventilating exhaust fan with speed step regulator, cooling capacity 700 Sq Feet, tank capacity 130 Litres with 4" honey comb pad of size 28" x 24" x 48" with angle iron stand of 25 x 25 x 5mm complete all as specified and directed.

M&L for sand filling in trenches for cable cushioning with clean, dry and unwashed sand, free from sharp particles including gently punning around cable complete all as specified and directed.

M&L for sub class 'B' bricks laid flat with equal to length of brick for cable protection laid across the cable complete all as specified and directed.

Supply and laying of 1100 Volts grade heavy duty XLPE cable of size 25 Sqmm 3.5 core, with aluminium conductor stranded polythylene insulated, served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches/floor or fixed on wall/pole and taking out old cable complete all as specified and directed.

S&F in replacement GI tubes, 'light grade' galvanised of 25 mm bore, with all fitting and laid in floors, under road, pavement or hard standing for protection of UG cable complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 89702.00

M/S Shanti Traders

M S MEWALAL UPADHYAY

PADAMSHRI CONSTRUCTION CO

RAJPATI CONSTRUCTION

sachinder singh

Nakoda Constrcution Company

Makewell Enterprises

M/S AJAY JAIN