SPECIAL REPAIR TO BLDG NO P-85 AND PROVISION OF CERTAIN SANCTIONED WORK AT PATIALA MIL STN.

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

Cement Plastering 15 mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas / parapet wall etc finished even and smooth without using extra cement and fixing of chiken wire gauge where directed complete all as specified and as directed by Engineer in Charge. Note : WPC and chicken wire gauge will be measured and paid seperately.

Cement plastering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed by Engineer in Charge.

Cement plastering 5 mm thick in cement mortar 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge.

Preparation of new/existing plastered surfaces as in ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

Preparation of new/existing plastered surfaces as in walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment from wooden surfaces and preparation of old surface of wood using sand papers etc and French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Complete removal of existing treatment and preparing old surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed and specified.

Demolition of cement concrete un -reinforced in ground floors/FF and pavings n.exc 15cm thickness complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (IS Marked) complete all as specified.

M&L cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in filling in PS Chowkhats and holdfasts blocks all as specified

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor and incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

Refixing 20mm bore steel water tubing obtained from taking down with all fittings and fixed complete to walls and ceiling or laid in floor etc and incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc and incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Taking down eaves gutters and rain water/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified.

S&F 100mm Bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with clamps,incl cutting chases if required for concealed Cast iron soil,waste and vent pipes and making good with brickwork etc,cutting not exc 20cm girth, complete all as specified. Note : Clamps for CI pipes will be measured and paid separately.

S&F Stack clamps for 100mm bore CI pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.

S&F CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

M&L for Cast iron nahani trap with long arm of min 450mm length, with dia of outlet 100mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F Cast iron cowls for 100mm bore pipes complete all as specified.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.

S&F PVC (HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and directed.

PVC (SWR) bends of any radius for 110mm bore with access door as in repair complete all as specified.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

Roughening surfaces of old concrete/terrazo surfaces in floor and vertical surfaces/RCC roof surfaces by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100 ,complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

M&L for cement concrete (1:3:6) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and filling with polyurethane elastic adhesive / sealant (white / grey colour) of approx density 1.30 Kg / litre complete all as directed by Engr-in-Charge and complete as specified.

Demolition of RCC of any description and Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in roof/floor slabs incl T-beams, chajjas, shelves etc complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified.

Mild steel TMT bars upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

M&L for cement concrete 1:2:4 (using 20mm graded aggregates) as in flooring incl form work and making of dummy/construction joints and filling the same with PU complete all as specified.

M&L Machine pressed rubber moulded precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey (ISI marked) coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified.

S&F Framed work as in doors or gates (Fe-290 Gde E-165) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

M&L for preparing new surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed and specified.

M&L cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings/cills/steps and the like works all as specified.

Liquid water proofing compound

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square,light shade single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified& as approved by Accepting Officer.

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square, single charged vitrified tiles in 600x600x 9 to 10 mm thick in approved shade, set & jointed in neat and pointed in white or coloured cement to match, as in skirting not 150mm high etc. in any pattern of light or dark tiles as approved, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified & as approved by Accepting Officer.

Providing and Laying Premium (1st) quality straight edge, stain free, matt finish, square porselano vitrified tiles in 600x600x 9 to 10 mm thick as in floors/skirtings etc. in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified & as approved by Accepting Officer.

Providing and Laying Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles with in 400x400x10 mm thick as in skirting & flooring in cement slurry over and including screed of 20 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed by Engineer in Charge & as approved by Accepting Officer.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as approved by Accepting Officer. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified & as approved by Accepting Officer.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified

S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F in repair doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank, including taking down existing PVC tank. complete all as specified.

S&F in repair doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank, including taking down existing PVC tank. complete all as specified.

Disconnecting existing tanks of any capacity/size, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

S&F factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with veneer with 6mm thick lipping frame to match, complete all as specified and fixing of following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf (Note:- Steel Mongery shall be paid as supply only against respective item.)

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated and fixing of following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf (Note:- Steel Mongery shall be paid as supply only against respective item.)

Supply only Stainless Steel (304 Grade) Finished Butt Hinges 150mm, complete all as specified.

Supply only Stainless Steel (304 Grade) Finished Tower Bolt 200mm long, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Handles 200 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Floor Door Stooper, complete all as specifed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in Shelves /steps /cills /jambs /skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

Labour only for making of grooves of size 4-5 mm wide and 2-3mm deep on steps of baroda green/kota stone or of any description with hand cutter/grinders complete all as specified and directed.

S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC Celuka board wooden finish pre laminated on single side and plain on other side below middle/lock rail and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including fixing of following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf (Note:- Steel / Aluminium Mongery shall be paid as supply only against respective item.)

Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including fixing of following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. (Note:- Steel / Aluminium Mongery shall be paid as supply only against respective item.)

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5X38.10X1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

Supply only powder coated aluminium tower bolt 200 mm long, complete all as specifed.

Supply only powder coated aluminium tower bolt 150 mm long, complete all as specifed.

Supply only powder coated aluminium handle 150 mm long, complete all as specifed.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6X63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

S&F 25mm bore minimum 1mm thick stainless steel curtain rods with stainless steel brackets and stainless steel finials of same manufacturer including stainless steel screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified. Note : Brackets and finial shall be measured and paid separately for supply only and fixing is deemed to be included in this item.

Supply only stainless steel brackets for fixing of 25mm bore curtain rods complete all as specified.

Supply only stainless steel finials for fixing of 25mm bore curtain rods complete all as specified.

S&F overhead shower 100mm dia with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F Bib taps, 2 way CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Bib taps with nozzle, CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified.

S&F single liver 3 inlet divertor consisting of exposed kit with operating lever, wall flange and button and concealed body for 3 inlet single lever divertor with button assembly cartidge sleeve and also including spout with wall flange chromium plated, screwed down, high pressure all as specified.

S&F single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified.

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F Stainless Steel Towel Rack 600mm long with lower hangers including all accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified.

S&F single bowl with drain board, glossy finish kitchen sink manufactured from 1.0 mm th. 304 Grade stainless steel of size 1040X500 (41"X20") and depth 205mm (8") top mount type including S&F outlet connection pipe for double bowl sink and 304 grade round strainer of 110 mm dia and all other accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified.

S&F sheet glass shelf assembly consisting of 5.5 to 6mm thick glass shelf 12 cm wide and 450mm lomg with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

M&L for toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed.

S&F Pillar taps, fancy type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete in all respect all as specified.

S&F vitreous china premium/1st quality corner wash hand basin , white colour, size 350x350 mm, screws & plug and brackets/aluminium angle etc. including S&F all accessories as recommended by manufacturer screwed for pipe or connections for fixing, packing, union complete in all respect and taking down existing of any description/size all as specified.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Demolition of reinforced cement concrete of any description and in water srorage tank of any size/capacity/description/position located on terrace of the building including moving the demolition portions to low lying area or out of defence land all as specified and directed.

S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, including S&F of bends/fittings as required and fixed to walls incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F single Y-shaped CI junction pieces, ordinary or inverted (spigot or socket type) for 100mm bore pipes complete all as specified.

Providing and laying 4mm (-0.2/+0.3) thick APP with mineral finish (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 5.6 Kg/sq.m water proofing membrane mineral finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps over the coat, 4mm th 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Tensile strength in longitueinal and transverse direction as 600±150/400±150 N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 200 N/. Softening point of membrane not less than 145 degree (iii) Penetration @25 C d 15-25mm (iv) Water Tightness 10 kPa (v) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make : Sika / STP / Fosroc.

S&F 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs.

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/ cup&saucer/ bottle /multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc.all as permanufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work & scaffolding where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Steel windows box type using ERW hollow 'P' section comprising double frame for gauged and glazed skelton shutter jointed internally with flat iron 40 x 4 mm complete including grill of 8 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, lugs etc all as shown on drawing No. TD-219 (c) sheet 1/3 to 2/3 complete and also including supply and fixing of 4 mm thick glass and stainless steel wire cloth irrespective whatever shown on drawing. Note : This item will be executed in Servant Qtrs only.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

S&F Kitchen electric chimneys 60cm for 2-4 burner stoves for wall mounted.including suction capacity 1200m3/Hr,heat auto clean technology,motion sensor,baffle filter,touch control panel,LED lamps as indicator complete all as specified.

Complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.

Preparation of new plastered surfaces/existing plastered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers /balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof jections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

Surface excavation not exc 30 cm deep and avg 15 cm deep and getting out in soft and loose soil complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, drains, etc., and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed.

Removal of excavated soil not exeeding 50 meter and deposting where directed at a level n. exc 1.5 M above the starting point, complete all as specified and directed

Cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundations fillings and mass concrete, complete all as specified

M&L 100 mm thick cement concrete 1:2:4 (using 20mm graded aggregates) as in flooring incl form work and making of dummy/construction joints and filling the same with PU complete all as specified.

Preparation of new plastered or unplastered surfaces of walls etc and applying two coat of cement base paint over a coat of chalk whiting (as primer) complete all as specified and as directed.

Forming embankments of solids including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base, complete all as specified and directed.

Factory made Pre-cast concrete blocks of size 300mmx150mm & thickness varying 150mm at bottom and 100mm at top M-20 (Design mix ) rounded or chamfered edges as in kerb stones set in CM 1:4 complete all as specified and directed

Vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed all including cutting for or pinning in and making good disturbed portion as reqd complete all as specified .

S&F Stainless(AISI 304 Grade) steel plate rack of size 900X750X150mm incl fixing bolts, complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one way switch for one light / fan, complete all as specified and directed by Engr-in-Charge Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric' wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed matching with existing surface shall be part of job at no extra cost for the following. iv) in ceiling Portion surface conduit wiring to be done.

All as per serial item no 156.00 but for One socket outlet point 6 A on independent board, complete all as specified and directed by Engr-in-Charge

All as per serial item no 156.00 but for One socket outlet point 6 A on same board, complete all as specified and directed by Engr-in-Charge

M & L for Concealed Point wiring with 2.50 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.50 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one 16 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge

S & F Call bell AC 230 volts single pole, complete all as specified and directed by Engr-in-Charge

S & F modular Bell push 6 Amp 1 module, complete all as specified and directed by Engr-in-Charge

S&F Modular Switch 1 way, 6A, 1 module, complete all as specified and directed by Engr-in-Charge

S& FModular Switch 1 way 16A, 1 module, complete all as specified and directed by Engr-in-Charge

S& FModular socket 6A, 2/3 pin combined 2 module, complete all as specified and directed by Engr-in-Charge

S&F Modular socket 6A/ 16A, 2/3 pin combined 2 module, complete all as specified and directed by Engr-in-Charge

S &F Modular fan regulator 120 W, 2 module, complete all as specified and directed by Engr-in-Charge

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge

M & L for Concealed Sub main Wiring with two run of 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and incl PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for main DB to Sub DB and for AC.

Supply and fix epoxy powder coated MCCB distribution box double door VTPN 4 way vertical type for MCBs alonwith provn of MCCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified. [Note: - MCCB will be measured and paid under separate item]

S & F MCCB, 4 Pole ,63 A, 18 kA, all as per complete all as specified .

S & F MCB, SP 06- 32 A, 10 kA, 'C' curve, all as per complete all as specified .

Supply and fixing Exhaust fan 300 mm sweep matelic body AC single phase 230V with self closinf louvers, including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to Exhaust fan, complete all as specified and directed by Engr-in-Charge

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified.

Supply and fix LED Lamp LED 9 W Ball Lamp LHLDERHEMD 8X007 9 watt all as per complete all as specified .

M & L for Concealed rigid non-metallic PVC conduit of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for drawing of telephone/TV cable by users all as directed.

M & L for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module all as directed.

S & F Single pole and neutral Sheet metal enclosure (industrial socket) with a two pin and earth plug socket for AC complete with one single pole MCB 16 to 20 Amp, 240 Volts all as directed

S & F Energy saving LED light fitting, 1 x 20 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cableall as per complete all as specified .

Supply & fix in LED mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt all as per complete all as specified .

S & F Energy saving LED light fitting, 1 x 10 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cablecomplete all as specified .

S&F IP 55 Surface mounted LED Porch light 12 watt in engineering plastic housing with clear plastic housing with clear prismatic diffuser complete all as specified .

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 1X10 W LED edge-lit led luminaire comprising of high brightness leds of capacity10 Watt complete all as specified .

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor size of 6 Sqmm, 2 core, including taking out unserviceable cable complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 mmx600 mmx6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters deep below normal ground level and filled with alternate layers of charcoal and salt with 15 cm thick layer , connected to galvanised wire earth lead 4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron, 20 mm bore GI pipe (med grade) for watering, 15 mm bore GI pipe (light grade) for protection of earth lead, including necessary earth work in any type of soil, Earth pit of PCC (1:3:6) type C1 and precast earth pit cover made of RCC (1:11/2:3) type A1 duly reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab complete all as specified and as shown in Electrical Plate No 3 of SSR Part-I including testing on completion.

Kartik Builders

Buttar Construction Co.

M/S RAJ KUMAR GUPTA

FAVOURITE ENGINEERS

m/s panchmukhi builders

M/s Harmans

NARINDER KUMAR SONS

Bidder Name

M/s Harmans