Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.1 LAccepted-AOC NAKA CHANDRA WADANI NAHARWALI MATA ROAD LASHKAR GWALIOR MP | GWALIOR | GWALIOR | MP | L1 | Accepted-AOC Being lowest tender | |
| 2 | L2₹20.8 L+₹1.8 L (9.58%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹22.2 L+₹3.3 L (17.1%)Rejected-Finance NEAR G E COLLEGE RASHOOLPUR MAHARAJPUR GWALIOR MP 475110 | GWALIOR | MADHYA PRADESH | 475110 | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹23.6 L+₹4.6 L (24.5%)Rejected-Finance NEAR GOVT HIGHER SECONDARY SCHOOL NO 1 MALL ROAD MORAR GWALIOR 474006 M P | GWALIOR | GWALIOR | MADHYA PRADESH | 474006 | L4 | Rejected-Finance Not being lowest tender | |
| 5 | L5₹24.1 L+₹5.1 L (26.8%)Rejected-Finance | L5 | Rejected-Finance Not being lowest tender |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA
GE AF TA GWALIOR-474020
REPAIR/MAINT OF ROLLING SHUTTERS, ROOF SHEETS AND MISC REPAIR IN CERTAIN TECH BLDGS IN TECH AREA AT AF STN GWALIOR
2022_MES_569267_1
8900/1444/GWL/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF TA GWL
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF TA GWALIOR
₹60,000
Yes
23 Feb 2023
15 Dec 2022
20 Jan 2023
15 Dec 2022
12 Jan 2023
29 Dec 2022
15 Dec 2022 - 28 Dec 2022
Amount
Taking down existing rolling shutter of any type, width and height not exceeding 3.0 M; in any position, keeping aside for repairs and refixing in the same position after repairing by opening of old hood covers, guide channels, lock plate, gear box, spring wheel, ball bearings, shafts, etc of any type & in any position and replacement of defective parts/components with new parts to make the shutters serviceable including all necessary welding/revetting /bolting, Punching, Sealing & greasing properly as required including making good adjacent damaged cemented surfaces if any complete all as specified and directed by Engineer-in-charge.
All as per item No 1 here-in-before but height exceeding 3.0 M to 4.5M complete all as specified and directed by Engineer-in-charge.
All as per item No 1 here-in-before but height exceeding 4.5 M to 6.0 M complete all as specified and directed by Engineer-in-charge. Note :- For item Nos 1 to 3 :- (i) Supply of new items shall be measured and paid separately. (ii) Fixing element of items shall be deemed to be included in respective item of taking down.
Repair, maintenance of existing rolling shutter of any description and in any position without taking down existing rolling shutter, removing hood covers, acertaining serviceablity of existing parts, removing unserviceable parts and replacement with new one, fixing the existing serviceable parts in their position for ensuring smooth functioning of the rolling shutters including greasing, oiling, etc and replacement of minor parts like screws, nuts, bolts, washers, etc and fixing the parts (new or old) in existing position with necessary welding, reveting, etc complete all as specified and directed by Engineer-in-charge. Note :- Supply only new parts shall be measured and paid separately under appropriate items of Sch 'A' and fixing & testing charges of these items shall be deemed to include in the unit rate quoted by the contractor for item No.4
Supply only guide channel made of not less than 2 mm thick mild steel sheeting; depth 50 to 150 mm (as required at site) and width of guide channel 25 mm including providing fixing cleats or supports with spacing not exceeding 0.75m complete all as specified and directed.
Supply only, fabricated 1.25 mm thick MS Sheet rolling shutter strip size 75 to 100 mm wide and shape as required at site for rolling shutter incl cutting, punching to made required shape and size, each alternative lath section shall be fitted with MS clips secured with revets at either end complete all as specified and directed.
Supply only flat spring suitable for following :- (a) Rolling shutter upto height 3.0 M (Spring wt not less than 4.5 Kgs each).
(b) Rolling shutter upto height 4.5 M (Spring wt not less than 7 Kgs each).
(c) Rolling shutter upto height 6.0 M (Spring not less than 10 Kgs each).
Supply only 40 mm dia (nominal bore) medium weight mild steel Pipe as in suspension shafts complete all as specified and directed.
Supply only hood covers made of 1.0mm thick mild steel plain black sheet, cut to size, holes, punched and spot welded to steel including bending or turning, mitred angle, etc as required complete all as specified and directed
Supply only MS spring wheel of any size with MS bush fixed with shaft for rolling shutters complete all as specified and directed.
Supply only fabricated bracket plate of mild steel sheet 3.15 mm thick, size (as per IS for different heights) and shape not exceeding 0.50 sqm for mechanically operated rolling shutter complete all as specified and directed.
Supply only ball bearing of following size (Make – SKF/NBC/TATA). (a) 50 mm dia
(b) 100 mm dia and above
Supply only of pinion set (local name Garari) suitable for rolling shutters complete all as speciifed and directed by Engineer-in-charge.
S&F in repairs fabricated lock plate made of MS flat iron 35x6mm and 400 mm long sliding plate with arrangement for locking with pad locks and providing pulling handles of mild steel fixed on both the interior and exterior side of lock plate complete all as specified and directed.
S&F in repairs bevel gear box for gear operated type rolling shutter (Mechanical type) made of high grade cast iron or mild steel complete all as specified and directed. [Make : Arun/ Kumar/ Gandhi as approved by GE.]
S&F in repairs GI Pipe, medium grade, 20 mm bore complete all as specified and directed. [Make : Jindal / TATA/Swastic].
M&L for applying one coat of synthetic enamel paint including preparation of old painted steel & iron surfaces of any description over 10 cm width or girth complete all as specified and directed
M&L for applying one coat of alluminium paint including preparation of old painted steel & iron surfaces of any description over 10 cm width or girth complete all as specified and directed.
Taking down existing collapsible steel gate/door carefully, making good by greasing/welding all necessary steel work and refixing the same in position, width of gate upto 5 m including applying one coat of synthetic enamel painting complete all as specified and directed.
Easing/Adjusting & repairs of sliding doors (size exceeding 18 sqm but not exceeding 40 sqm) each shutter of Aircraft hangers by providing welding, oiling, greasing, etc and all necessary arrangements required for smooth sliding and locking of the sliding door complete all as specified and directed by Engineer-in-charge. Note :- Supply of unserviceable parts shall be measured and paid separately under appropriate items of Sch 'A'/BOQ and fixing & testing charges of these items shall be deemed to include in the unit rate quoted by the contractor for item No.23
Supply only cast iron wheel 150 mm dia (weight not less than 8 kg each) including nuts, bolts, fixtures, etc complete all as specified and directed.
Repair, maintenance of existing pulleys of any description and in any position at height not exceeding 15m with or without taking down existing pulleys, acertaining serviceablity , ensuring smooth functioning of the pulleys including greasing, oiling, etc and replacement of minor parts like screws, nuts, bolts, washers, etc and fixing the parts in existing position with necessary welding, reveting, etc complete all as specified and directed by Engineer-in-charge. Note :- Scafolding for repair of pulleys up to height shall be deemed to include in the unit rate quoted by the contractor
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F of 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type chain wheel and hand chain complete all as specified and directed.
S&F of collapsible steel gates, top hung,consisting of channel pickets, pivotedflat bars, top and bottom runners, brasshandles etc., as specified, erected inposition and securing runners withholdfasts and brackets, complete all as specified and directed.
S&F milds steel framed work such as steel gates, fixed portion above gates , including pintle hinges, stops,hand-made sliding bolts, mild steel sheet etc. con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of new steel & iron surfaces of any description over 10 cm width or girth complete all as specified and directed
Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed
All as per item No 33 here in before but, except brick (using old bricks obtained from demolition in serviceable conditions) complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortor (1:6) and surface finished even and fair complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of external emulsion paint over one coat of wall care putty on external surfaces of building complete all as specified and directed.
M & L for preparation of old painted surfaces of wall and applying one coats of external emulsion paint over one coat of wall care putty on external surfaces of building complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 15 to 18 mm thick colour Granite work (table rubbed and polished) as in riser/platform , wall lining etc.pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 10 mm thick screed plaster in cement mortar(1:4) complete all as specified and directed .
M & L for PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in benching,kerbs and levelling course etc complete all as specified and as directed
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in Plinth protection and finishing the surface even & fair complete all as specified and directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering cm 1:4 for back coat all as specified and as directed.
M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed.
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and stirrups including cranking, bending, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed.
M & L for formwork to sides of pillars, columns etc complete all as specified and directed.
M&L for RCC 1:1:2 using 20mm graded stone aggregates as in columns, pillars, piers etc all as specified and directed.
Demolition of cement concrete (reinforced) in ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed
Dismanting of bird proofing i.e welded steel wire febric etc an size and any thickness including cover filets, screw and nut bolts etc at any height of shelter/ hangers complete all as specified and directed.
S&f bird proofing net for hanger/shed/sheler etc upto 15m height complete as per manufacturer instructions: (a) Type of bird proofing net : Polyolefin all weather proof co-primer (b) Method of knotting : Machine knotting using CNC machine with DSLS technology for anti slip knotting (c) Heat Setting : Steam set for greater dimensional stability and knot firmness (d) Diametre of the twine : 1mm dia wire with square mesh size 25mmx25mm (+/- 2mm) (e) TBS (twine breaking strength) : 16kgf min (f) MBS (Mesh breaking strength) : 12kgf min (g) KBS (knott breaking strength) : 22kgf min Note : All necessary items i.e clip, nuts, washers and other acessories required for proper fixing as per manufacturer instructions shall deemed to be included in the quoted rate.
Refixing of bird proofing net for hanger/shed/sheler etc upto 15m height complete as per manufacturer instructions including All necessary items i.e clip, nuts, washers and other acessories required for proper fixing as per manufacturer instructions shall deemed to be included in the quoted rate.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismentling of existing Plain or corrugated steel sheeting /AC Sheet complete all as specified and directed.
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismentling of existing Plain or corrugated steel sheeting/AC Sheet complete all as specified and directed.
M&L in repair of sliding doors wheel of dia 300mm dia with bearing upto 500mm S.No 6205 (weight of wheel not less than 19 Kg) including 50mmx10mm thick flat weilding/bolting to the connecting plate by providing welding, oiling, greasing, etc and all necessary arrangements required for smooth sliding including renovation/fittment of bush of wheel/weilding/cleaning of track etc complete all as specified and directed.
S&F 5.0mm thick and over mild steel plain black sheet of grade Fe-410-W(Gde E-250) quality 'A'; cut to size, holes, punched and spot welded to steel including bending or turning, mitred angle, etc as required complete all as specified and directed
M&L for 100 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M& L for forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
M&L for MS work for wind ties in roofs including securing bolts and similar work quality conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates using FE 410 W (Gde-E-250 quality A) etc complete all as specified and as directed.
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using FE 410 W (Gde-E-250 quality A) etc complete all as specified and as directed.
M&L for Steel work in tubular truss including special shaped washer etc complete using ERW or induction butt weld tubes confirming to IS 1161-1998 Grade st 240 FE 410-W gde 250 Quality A
M&L for Running welding in repair to metal having thickness exc 6mm but not exc 9mm complete all as specified and as directed .
Dismantling posts or struts (Wood, steel, or RCC) any section, including taking out embeded portion and making good distrubed ground, including any type fencing all as specified and directed.
Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.
Supply only Chain link MS galvanised 4mm dia (wt. not less than 4kg) fencing any size or type all as specified and directed .
S & F in repair galvanized 2 stranded steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard hooks, including securing and tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and directed.
Tightening /restraining and resecuring of old existing barbed wire including making good staples etc in same position complete all as specified and directed .
M&L for 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including Dismentling of existing Plain or corrugated steel/PGI Sheet complete all as specified and directed.
MOHAN SINGH BHADORIA
M/s Kishan Construction Company
Ganga and Sons
R.B. ENTERPRISES
GURU KIRTH BUILDERS
M/s Jai Durga Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .