Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being Lowest L1 | |
| 2 | L2₹26.5 L+₹2.8 L (11.9%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
REPAIR TO ROLLING SHUTTERS, IRON DOORS AND OTHER MISC WORK IN DOMESTIC AREA AT AIR FORCE STATION PATHANKOT
2022_MES_543973_2
8421/GE/PAF-34/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹40,000
Yes
25 Oct 2022
23 Sept 2022
17 Oct 2022
23 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
All as per item No 2 above but except bricks complete all as specified and directed by Engineer-in-Charge.
Rendering in cement mortar (1:4) 15mm thick on brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Rendering in cement mortar (1:4) 15mm thick on brick/concrete surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified and directed by Engineer-in-Charge.
Preparation of surfaces and apply three coats of white wash on newly plastered surfaces of wall complete all as specified and directed by Engineer-in-Charge.
PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in cills, steps, plinth courses, coping etc including necessary form works complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed by Engineer-in-Charge.
Dismantling asbestos cement (corrugated, semi-corrugated etc sheets in roof covering complete all as specified and directed by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
Material and labour for 75mm thick cement concrete (1:3:6) type C-2, using 40mm graded agg as in plinth protection, flooring etc including finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.
Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engineer-in-Charge.
Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed by Engineer-in-Charge.
Rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails and similar works fixed with angle cleat or other connecting plates complete all as specified and directed by Engineer-in-Charge.
Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings xclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Material and labour for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L- type or J- type or cranked hook complete all as specified and directed by Engineer-in-Charge.
Refixing old asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L- type or J- type or cranked hook complete all as specified and directed by Engineer-in-Charge.
Material and labour for Asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with L- type or J- type or cranked hook complete all as specified and directed by Engineer-in-Charge.
Material and labour for filleting in any position and to any shape as in filling the gap between roof sheet and wall and similar work in cement mortar 1:4 including all mitres, stops, etc exc 25 but n exc 50 Sq cm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 1 mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed by Engineer-in-Charge.
All as per item No 25 above but gear operated type with bevelled gear box and crank handle complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Preparation of newly steel surfaces exceeding 10cm width or girth and applying two coats of aluminium paint surfaces of rolloing shutters complete all as specified and directed by Engineer-in-Charge.
Taking down carefully existing steel gates any type for carrying out necessary repairs by replacing old unserviceable hinges, rollers, roller plates, gate piller etc , greasing, oiling for its smooth functioning complete and re-erecting the same in old position, area of gate not exceeding 15 sqm each (NOTE :- supply and fix parts of gate, painting, brick or concrete work will be measured and paid separately complete all as specified and directed by Engineer-in-Charge.
Preparation of old steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Taking down carefully existing rolling shutters any type for carrying out necessary repairs by replacing old unserviceable parts, greasing, oiling for its smooth functioning complete and re-erecting the same in old position, area of shutter not exceeding 15 sqm each (NOTE :- supply and fix parts of shutter, greasing, oiling and painting will be measured and paid separately complete all as specified and directed by Engineer-in-Charge.
All as per item No 32 above but area exceeding 15 sqm but not exceeding 30 sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down the inter locking laths from rolling shutter and supply and fix new laths of cold rolled steel strips 0.80mm thick having inter locking curls at both ends and a deep corrugation at the centre with the ridge depth not less than 12mm complete all as specified and directed by Engineer-in-Charge.
All as per item No 34 above but thickness of lath 1.10mm complete all as specified and directed by Engineer-in-Charge.
Taking down bottom lock plate any thickness and supply and fix new bottom plate 3.15mm thick reinforced with MS angle not less than 35 x 35 x 5mm size, bottom sliding bolt for locking arrangement two handles for pulling etc complete all as specified and directed by Engineer-in-Charge.
Taking down the existing guide channel of rolling shutter from columns/walls as specified and supply and fix new guide channel made out of 1.60 mm thick MS sheet with minimum depth of channel 65mm complete all as specified and directed by Engineer-in-Charge.
All as per item No 37 above but guide channel 75mm depth complete all as specified and directed by Engineer-in-Charge.
Taking down existing unserviceable hood cover and supply and fix new hood cover made out of mild steel sheets 1.00 mm thickness hexagonal /square in section properly stiffened with nuts and bolts angle iron /flat iron at top and bottom edges fixed to brackets or plates complete all as specified and directed by Engineer-in-Charge.
Taking down spring 45 threaded and supply and fix new spring 45 threaded all as specified complete all as specified and directed by Engineer-in-Charge.
All as per item No 40 above but 55 threaded spring complete all as specified and directed by Engineer-in-Charge.
Taking down gear type spring and supply and fix new gear type spring complete all as specified and directed by Engineer-in-Charge.
Taking down existing gear box and supply and fix new gear box with machine cut gears with worn gear wheel of high grade cast iron or mild steel with worn of MS complete all as specified and directed by Engineer-in-Charge.
Taking down the pully 8" dia for gear type shutter and Supply and fixing new 8" dia pully of iron complete all as specified and directed by Engineer-in-Charge.
Greasing oiling complete to the existing rolling shutter for smooth function and test the same to smooth function all as specified pull and push type rolling shutter complete all as specified and directed by Engineer-in-Charge.
All as per item No 45 above but gear type rolling shutter complete all as specified and directed by Engineer-in-Charge.
Preparation of old steel surfaces exceeding 10cm width or girth and applying two coats of aluminium paint complete surfaces of rolloing shutters complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 60 mm thick Machine pressed coloured precast cement concrete interlocking paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. set and jointed with gray cement and no pigment including Sand cushioning and dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.
Dismantling old factory made precast cement concrete interlocking tiles of any thickness and size and refixing in the same position in true level complete all as specified and as directed by Engineer-in-Charge.
Material and labour for designer coloured paver tiles of size 300 x 300 x 25 mm thick or equivalent size as in machine pressed set, jointed in neat cement slurry over and including sereed bed 20 mm thick in cement mortar (1:6) complete incl dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.
Material and labour for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc exc 25 but n exc 50 Sq cm complete all as specified and as directed by Engineer-in-Charge.
M/S MULTI ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .