Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC | L1 | Accepted-AOC accepted | |
| 2 | L2₹7.4 L+₹163 (0.02%)Rejected-Finance 2 207 MOOVALUR MELA STREET MAYILADUTHURAI NAGAPATTINAM TAMIL NADU 609806 UDYAM TN 38 0011148 | MAYILADUTHURAI | TAMIL NADU | 609806 | L2 | Rejected-Finance rejected |
Tender Value
₹7.5 L
EMD Value
₹7,500
Closing Date
8 Nov 2023, 3:00 pmClosed
Block development Officer (V.P) Mayiladuthurai
Block development Office Mayiladuthurai
Construction Of 10000 LTR OHT (7.50m Stage) at Arkadu Thoppu Theru in Anathadavapuram panchayat Mayiladuthurai Block
2023_RDTN_385251_1
3090/2023/B1 date31.10.2023
Open Tender
Civil Works - Buildings
Item Rate
180 days
Block development Office Mayiladuthurai
Refer Tender Document
8 documents required · 8 mandatory
₹0
₹7,500
Yes
13 Jan 2024
3 Nov 2023
8 Nov 2023
3 Nov 2023
8 Nov 2023
3 Nov 2023
Amount
07.Construction Of 10000 LTR OHT (7.50m Stage) @ Arkadu Thoppu Theru in Anathadavapuram panchayat
Earthwork excavating and depositing on bank with an initial lead of 10m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per SS20B.
Sand filling in foundation good river sand including cost and conveyance and all labour charges etc., Complete.
Cement Concrete 1:4:8 mix using 40mm ISSHBG metal from approved quarry, including cost and conveyance of all materials to work site and all labour charges for mixing, laying, Compacting and watering within 200m lead for good water etc., complete.
Cement concrete ( M30)1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams
a) For raft below GL ( 1.50-4.50)below GL
b)For coloum and brace upto GL (0-1.50 below GL
b)For coloum and Middle brace upto (0-4.50m
b)For coloum beam floor slab and side wall from 4.50-6.00m from GL.
b)For side wall &Roof slab from (6.00-8.55m ) from GL.
Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
Plane surface - Below GL For coloum footing and GL Brace
GL 0-4.50m For GL brace and Middle brace
Above GL 6.85mto9.60m For Floor Beam and Bottom of Floor slab
Curved surface -6.00to8.45m For side wall& Roof slab sides Hanch
Square coloum
For coloum Below GL
For GL to 3.30 m
For coloum 3.30m to4.30m
For coloum 4.30m to5.30m
For coloum 5.30m to6.30m
For coloum 6.30m to6.85m
Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
Exterior Emulsion two coats of approved colour including cost and conveyance and all labour charges etc complete .
Fabrication,Supply , delivery and fixing of outside MS ladder of 45cm wide 50x50x6mm MS angle for side stepsin 16mm MS plain rods fixed at 30mmc/c welded, joinded etc.
Providing and fixing of RCC access ladder in RCC 1:1:5:3 mix using 20mm HBG metel including cost and conveyance and all labour charges etc complete.
Providing PVC ventilating arrangements, mosquito proof nylon net with 110mm PVC Pipes and cowl etc complete.
Providing manhole cover of size 0.60x0.60m in RCC 1: 1:5:3mix with suitable reinforcement and 50x50x6mm MS along edges etc. comple.
Refilling with excavated earth (other than sand complying with standard specification for filling in trenches.spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
50mmdiaGI pipes for tank connection
50mmdiaG.M Gate valve
50mmdiaGI coupling
50mmdiaGI Elbow
50mmdiaGI Bend
50mmdiaGI Flange set
50mmdiaGI Union
Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).
Reaming from 200 mm dia pilot bore to 300 mm dia bore as directed by the TWAD Board Officers upto 60 m Depth ending from ground level
Labour Charges for inserting 200mm dia PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc. complete
Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and One hour 1303.93 fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method.
Supply and delivery of 200mm OD PVC plain casing (CM) pipe
Supply and delivery of 200mm PVC end cap
Supply and delivery of 2.5 Sqmm submersible cable
Supply and delivery of 50mm Upvc Column Pipe
Supply and delivery of 50mm GI flange set
Supply and delivery of 50mm GI coupling
Supply and delivery of 50mm MS Clamp set
Bore CoverBore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) 6" Casing Pipes
Labour charges for the erection of submersiblepumpset inborewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the requireddepth valves erection clamps, pressuregauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter,three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. up to 5.0 HP
labour charges for slotted
Provision for EB Service Connection Charges
Provision For Nameboard Charges
Provision For Photo Charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
BAMBOO INFRA PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .