Construction of Funeral shed to Rajankuppam Padasalai street in Ward No 8

Amount

Installation of vertical bored cast in-situ Double under Reamed pile of 300mm diameter in all types of soil using Design Mix concrete of grade M30 with OPC cement, fine aggregate, 20mm and downgraded HBGS jelly coarse aggregate. The rate includes cost of Reinforcement and binding wire, fabrication, welding charges, placing of reinforcement cage in borehole in correct position, cost of boring to the required depth with Bentonite solution with Temporary casing of required length, conveyance of materials and pouring concrete including all tools and plants shifting the plants and equipments from one point to another. Excavation of mud pits for circulation of Bentonite solution, closing the mud pits to the original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the Departmental officers. To carry a safe working load not less than than specified, excluding the cost of steel reinforcement but including the Bentonite solution, machinary and labour charges etc., all complete.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and cleaning and levelling the site etc.,complete - Open Earth Work Excavation

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (one cement, three sand, six aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Upto Basement

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) -Above Ground Level

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Brick work in CM 1:5 (one cement & five sand) using IIIrd class ground moulded country bricks of size 83/4X41/4X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification - Ground Floor

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc, complete as per standard specifications

Plastering with cement mortar 1:3 (One cement and three) 10mm thick in all floors including cost and conveyance of all materials to site etc, complete as per standard specifications

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.- 10m2 S.I.359

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Conducting GEO physical survey for quality and quantity of water etc., completed.

Drilling of borewell any where in Tamilnadu including transportation from one place another place within tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand,stone,shale,pebbles,boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatrey mud and circulation metheod using Contractor's rig,fuel,labour,drilling,betonite mud and water required for drilling at the site shown by the TWAD officers including construction of mud pit only Calyx drills are to be used.

Reaming from 140/150 mm dia pilot bore to 300mm dia bore as directed by the department officers etc completed as per standard specifications.

Labour charges for inserting PVC casing pipes assembly ( with slots without slots ) in the drilled hole including welding the joint the pipes with PVC couplers with cement paste etc.complete.

Charges for developing the bore well for the entire depth with suitable air compressor including transportation for air compressor as departmental officers conducting yield test in the bore well using 600CC of compressor.

Supply and delivery of 200mm dia PVC casing pipes. 200mm dia PVC plain casing pipe

Supply and delivery of 200mm dia PVC casing pipes. 200mm dia PVC slotted casing pipe

Supply of Three Phase 50x175 LPM submersible Pump set Duty of Suitable for 150 mm dia Borewell as per IS 8034 wthout panel Board.

Labour Charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to the required depth and also fixing of riser pipes to required depth valves erection clamps,Pressure gauges up to exterior wall of pump room and erection of panel board consisting of TPICN switchws starter,Voltmeter,Ammeter,3 bilot (indicating)lams capacitar single phasing prevented water level gaurd and laying and jointing the cables and twin earthing as per I.E. rules etc, complete and testing the pump set and trail run for 10 days-up to 5HP

Supply of 3 Phase 6 HP Panel Board with Star Delta with Two Level Guard and Auto Start including excise duty,VAT, Two Level Guard worth facilities and panel board should be provided as per specification given in board circular No.23/DCE/QTA/2004/Dt.23.08.2004 etc.complete.(TWAD Board Schedule of Rates 2016-17 Page No.110 item No.11.2-1)

Providing Kisok of size 0.75 m x0.75 m x 0.45 m made up of MS Sheet of 18 gauge and MS angles of size 50x50x3mm alround covered wuth 16 gauge MS sheet and kisok door made up of MS plates of size 25 mm x 3 mm including cutting,welding,grinding,locking arrangements and labour charges etc.

Supplying and fixing of 200 mm bore cover including cost of conveyance of all materials etc.,complete.

Supplying and Laying of PVC insulated and Sheathed 3 core flat type copper cable confirming to IS 694/1990

Supplying and fixing of 63 Ams Fuse ISI including cost of conveyance of all materials etc.,complete.

Supplying and fixing of 50mm UPVC column pipe including cost of conveyance of all materials etc.,complete.

Supplying and fixing of 2" dia G.M NRV including cost of conveyance of all materials etc.,complete.

Supplying and fixing of 2" dia M.S clamp set including cost of conveyance of all materials etc.,complete.

G VIJAYAKUMAR