Interchange Animal Rooms

Amount

Demolishing brick work and plaster manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside ACTREC campus as per direction of Engineer-in-charge

15 mm cement plaster of mix for wall with ready mix plaster wherever required as per the instructions of Engineer incharge

LABOUR CHARGES FOR PARTITION/SLIDING DOOR WORK: Removing the existing partitions/ doors and handing over the same at required place indicated by the engineer in charge. etc. complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm enter to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned First quality to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproof putty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors,aluminium window frame & glass etc as to the entire satisfaction of engineer in charge :With Luster Paint two coats of primer and two coats of paint. ( Rate inclusive of scafflolding, labour charges, ladder etc.)

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putty of average thickness of 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Material, Labour Charges) Etc. Only to be applied at distressed areas and newly plastered surface as per the instruction of Engineer incharge.

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including application of primer and synthetic enamel paint of approved colour for making support system for tables as per the instruction of Engineer incharge

Providing and laying Polished Granite stone top for table in required design and patterns, in linear as well as curvilinear portions of the table with polish and coving all complete as per the architectural drawings with 18 mm thick stone slab laid and jointed with adhesive compound over the 12mm thick plywood with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing and fixing sun control/black out/ tinted/ frosted films 2 mil thick film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scafolding job is to be complited as per garware film specification and as directed by EIC alongwith design and writings if any.

Removing old sun control films 1.5-2 mil thick film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scaffolding job is to be completed as per film specification and as directed by EIC

FLUSH SHUTTER Providing & fixing in position - 40mm thick flush door of shutters block board solid core internally lipped bonded with water proof type synthetic resin hot pressed with marine ply finished on both faces including prov. And fixing teak wood 20mm thick lipping on all sides fixing heavy duty approved make 4 levers mortice lock with pair of handle of approvd make & quality brass/S.S . fittings such as grab handle, hinges, tower bolts, of approved make fixing fixtures locking arrangements with fixing fixture locking arrangements with screws etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge.

SITC of 36 W LED fixture concealed concealed 2ft * 2ft as per site requirement and as directed by OIC - ES Supplying of square shaped CRCA / die-cast aluminium powder coated housing LED Panel light 600X600mm of PREMIUM RANGE , 36 W 2ft x 2ft with provision for plane front frame with translucent cover fixed to the housing complete. -Luminaires suitable to Aluminium metal grid ceiling, -In built electronic LED pre wired driver, -Luminaire shall be with special translucent -High diffuser>85%, -Minimum System Lumen output 3600 lumens -High Surge Protection:-3kV. -Luminaire shall have 4 no.s of Steel hook-up wire suspension. -High Efficacy near or equal to 100 lm/watt, -CRI>80,THD<10% -Provide Uniform low glare lighting,non yellowing, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 5700K ±355K

Supplying and fixing following size modular, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

6 pin 15/16 A socket outlet

modular type Ceiling fan regulator

SITC of Size 1200 mm sweep ceiling fan with ceiling fan hooks , and all accessories

Supply , laying and termination of 1core X 1.5 sq. mm flexible copper wire FR PVC in casing capping , PVC conduit pipe for electrical wiring

Supply , laying and termination of 1core X 2.5 sq. mm flexible copper wire FR PVC in casing capping , PVC conduit pipe For for electrical wirings

Supply , laying and termination of 1core X 4 sq. mm flexible copper wire FR PVC in casing capping , PVC conduit pipe For for electrical wirings

SITC of PVC Casing Capping 1.25 inch with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.

Supply & laying of 25mm dia PVC flexible conduit conforming to ISI standards with required number of coupling, PVC bushes, check nuts etc

SITC of 32A , DP MCB With Metal type Enclosure

SITC of RED colour LED Lamp 7 to 10watt with angle Holder

SITC of 300mm Metal body exhaust fan with frame , works includes wall breaking for fixing of fan and final finishing with painting of the same

Removing of exiting Electrical fittigs like LED fittings , switch sockets , fans etc , Casig cappings , Conduict etc.

Jai Malhar Constrction