REPAIR OF FLOOR, JOINERY, SANITARY FITTINGS, BLOCK WORK, PLASTER ALLIED WORKS AND PERIODICAL AT SE FALLS AREA UNDER GE SHILLONG

Amount

Dismantling of plain or corrugated AC/ steel /fibre glass reinforced transluscent sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.

Dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed by Engineer-in-Charge.

Material and labour second class hard wood in scantling clean sawn timber fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding ,aluminium partitions any description fixed in any position with nails etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm thick second class hard wood boarding in eaves board/fascia planed one side with butt joints fixed with nails complete all as specified and directed by Engineer-in-Charge.

Material and labour for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in cabinet / cup-board completed all as specified and directed by Engineer-in-Charge.

Material and labour 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work completed all as specified and directed by Engineer-in-Charge.

M& L for 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions completed all as specified and directed by Engineer-in-Charge.

Material and labour second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc 13 Sqcm & n. exc 25 Sqcm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm size, extruded brass handle, fabricated type, polished complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 40 mm dia, cupboard knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 400 mm steel telescopic ball bearing drawer channel complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 4 levers brass cupboard locks grade I,size 50 mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness, Aluminium frame shall be 60cm x 60 cm to recieve ceiling board complete all as specified and directed by Engineer-in-Charge.

Material and labour for 4mm thick E - board 600 mm x 600 mm prepainted fibre board ceiling designer/decorative type with different designs as approved by the GE fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge

Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge

Material and labour for Non skid joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Material and labour for Glazed ceramic coloured tiles in vertical surface of size 300x450mm, 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in cement mortar 1:4 complete as specified and directed by Engineer-in-Charge

Material and labour for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge

Material and labour for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge

Material and labour for machine pressed pre polished chequered cement concrete tiles 300 X 300 X 25mm thick over 15mm thick screed bed in cement mortar 1:6 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cement mortar thickness (below/above ground level) all as directed by Engineer-in-Charge.

Material and labour 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finished even and fair with 10 mm joint filled with bitumen mastic (mix of bitumen and sand at 3m intervals complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains etccomplete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cement mortar inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed by Engineer-in-Charge.

Material and labour 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hard standing finished even and fair laid in alterrnate bays of size not exc 2 m X 2m with construction joints and filled with joint sealing compound complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge.

Material and labour Precast cement concrete block masonry with solid block exc 10 cm in width, type C1 (1:3:6) (using 20mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour Precast cement concrete block masonry with solid block 10 cm thick, type C1 (1:3:6) (using 20mm graded stone aggregate) with plain or interlocking joints and setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description in any position not otherwise described complete all as specified and directed by Engineer-in-Charge.

Material and labour Precast RCC type B1 (1:2:4) (using 20mm graded stone aggregate) as in cover slab, landing, shelves, chhajja and similar articles with plain face set in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M & L TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire not less than 0.90 mm dia on securing with clips complete all as specified and directed by Engineer-in-Charge.

Material and labour 20 mm thick Granite stone slab oval shape cutting for fixing of wash hand basin as required size, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding to edges laid in any position complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) in two coats (10mm thick undercoat and 5mm thick finishing coat) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound shall be measured and paid separately.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces including finishing even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply only integral Water proofing compound (ISI Mark) complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint over a coat of 1mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening after necessary repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for second class hard wood plain, solid, straight chowkhat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mm B.W.P. commerical ply flat on both side with feather edged complete all as specified and directed by Engineer-in-Charge.

Material and labour 30mm thick second class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixing in the frame at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, size of hinges 100 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Extruded Aluminium, anodised, bow handle of size 100mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium anodised barrel bolt and fixed of 200 mm length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium anodised barrel bolt and fixed of 100 mm length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 4 levers Brass Mortice lock, vertical type, 100mm length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing powder coated anodized aluminium frame for doors / windows / ventilators / partitions and for fixing aluminium composite panel, glass etc with one or more rebates including joining cleats, rubber gasket for fixing etc complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Powder coated anodized aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note: Panel filling ie. glass, fibre sheet, board etc. shall be measured and paid separately.

Material & labour Powder Coated aluminium anodised skelton windows & ventilator shutter fixed with glass and gauge, sliding or side hung type without sash bars using standard aluminium section (Shutter section weight not less than 0.55KG/RM) , jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles,tower bolt, stainless steel adjustable friction stay hinges etc complete all as specified all as specified and directed by Engineer-in-Charge. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, stainless steel friction stay hinges, tower bolt and fixing of 5.5mm glass etc. (ii) Supply only 5.50 mm thick sheet glass shall be measured and paid separately.

M & L for powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Supply and fixing Sheet glass, 5.50mm thick ordinary quality, in squares,not exceeding 0.50 sqm in each pane including one side affixed with one way vision film plain / pattern design of required colour, anti UV reflective and rubber packing etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sheet glass, 5.50mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including one side affixed with one way vision film plain / pattern design of required colour, anti UV reflective and rubber packing etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made 6mm thick powder coated anodised aluminium composite panel exterior grade, plain/pattern design minimum 0.50 mm thick aluminium sheet both side on solid polyethylene core (fire resistant) fixing to aluminium frame with necessary jointing/cover strips and screws etc complete all as specified and directed by Engineer-in-Charge.

Material and labour 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Aluminium extruded section door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000 mm width and of weight between 61 to 80 kg and fixed (ISI Marked) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, and waste pipe with grating and union for discharge pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Urinal spreader of chromium plated any for fixing with 15 mm dia pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15 mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china urinal partition white size 310 X 700 mm above floor, fixed to wall complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Water closet Pedestal pattern, single piece WC with UF soft close seat cover , hinges, fixing accessories set and accessories set, cistern fittings, size: 365 x 655 x 765 mm, P trap -180 mm etc complete all as specified and directed by Engineer-in-Charge. Make: Jaquar of LYRIC series Cat No LYS-WHT-38851P or equivalent make of Prayag / Hindware.

Supply and fixing in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement to pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for CP grating doom 100mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 50mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fitting on walls/celing or laying in floors complete all as specified and directedby Engineer-in-Charge.

Supply and fixing in repair stainless steel Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Wash hand basin vitreous China oval type coloured any size, fixed on granite slab including cutting for and pinning in ends of brackets, or erecting stand with fixing brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450 mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge. Note: Rate for Granite slab shall be measured and paid seperately

Supply and fixing in repair Bip tap, cast copper alloy chromium plated, size 15mm fancy type,complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections for 20 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI steel tubing medium grade 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Angular stop cock, fancy type, cast copper alloy chromium plated, 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), multilayered, hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair ball valve of size 20mm, high pressure, with polyethylene float and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Gun metal gate 20mm valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) bend, any radius, 110 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) 110 mm bore pipe single socketed in any length with rubber ring joints, fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) 75mm bore pipe single socketed in any length with rubber ring joints fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) vent cowl 75mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia PVC (SWR) multi floor trap with CP grating including jointing to pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for PVC (SWR) gully trap 125/110 mm, setting and jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment of wall and applying two coats of Oil bound distemper over a coat of primer over 1 mm thick wall care putty including necessary preparation of wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for weather coat (exterior emulsion) two coats over a coat of alkali resistant primer on external surfaces including complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of old treated wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old painted surfaces of wall/ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old painted wooden surfacaes of any descripion n.exc 10 cm width or girth and applyinjg one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old steel surface and applying one coat of synthetic enamel paint on steel surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Acrylic distemper, one coat over old treated ceiling surfaces including necessary preparation of old surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour French polish on old treated surfaces of any description over 10 cm width or girth including cleaning necessary preparation of old surfaces with a coat of wood filler with two or more coats complete all as specified and as directed by Engineer-in-Charge.

Material and labour Venetian blind for windows 100mm wide slats made of fabrics, including head and bottom rail made up of powder coated anodised aluminium frame, water proof cord tilter, tape ladder,sliding hooks and pully of any colour with all fixing arrangement complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC pipes 180mm half round fixed as valley gutter pipe at roof level and walls including joint bracket, running outlet, elbow, stop end, stop end outlet, support bracket fixing at 1mtr distance each complete all as sepcified and directed by Engineer-in-Charge

M/S Surendra Prasad and Associates

M/s Chandan Kumar Thakur