PROVN OF APPROXIMATE 1100 MTRS CHAIN LINK FENCING AT BLDG NO T 51 PT GROUND OF ARTY STATIC WKSP EME DEVLALI PROVN OF 25 GEYSER 25 LTR IN OR MD ACCN AT MILAN LINE AND CERTAIN MINOR WORK UNDER THE AOR OF GE DEVLALI

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/lo0se soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in average soil.

M&L for cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

S&F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F for Mild steel bars 10mm dia and over, cut to length, bending, spirally for hooping columns, hooking ends as sag rod complete all as specified and directed.

S&F for galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs @ 75mm spacing and strining and fixing to any type of standard rails straining bolts, including securing or type at crossing etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply chain link 4mm dia galvanised steel wire, 100mmX100mm mesh fencing, made up into mattresses or cages, lapped wired and laid/ fixed in position complete all as specified and directed. Note : Flat Iron, round bas, nut bolts and washers shall be measured and paid separately.

S&F for 16 to 20mm dia shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n exc 10cm long complete all as specified and directed.

M&L for preparation of New or previously untreated steel surface of any description over 10cm girth or width, not otherwise describedandand applying two coats of Aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

Preparation of New or previously untreated steel surface of any description n exc 10cm girth or width, not otherwise describedand applying two coats of synthetic enamel (ordinary tint) over one coat of red oxide primer complete all as specified and directed.

Clearing away all grass vegetation, saplings, brushwood, undergrowth, roots and trees not exceeding 30 cm girth (measured one meter above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of concrete surfaces in CM (1:4) , finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregates) in coping/benching including necessary form work and finishing exposed surfaces of concrete even and smooth without using extra cement complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, includingspreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m anddepositing where directed complete all as specified and directed.

M&L for cement concrete 1:5:10 type E2 (40mm graded aggregates) in foundations, filling and mass concrete complete all as specified and directed.

M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed.

M&L for cutting steel tubing to required length for insertion of new Tee Branches, reducer in any position of 15mm dia pipe line complete all as specified and directed.

S&F in sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S&F tubes, 'medium grade', galvanised, with all fitting; for fixing concealed in wall complete of 15mm dia with complete fitting and fixture complte all as specified and directed by Engr-in-charge.

S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of cap 15mm dia complete all as directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of cap 15mm dia complete all as directed

S&F PVC connection 15 mm size for cold water with PTMT nuts of length 450 mm complete all as specified and directed.

S&F CP connection 15 mm size with for hot water with PTMT nuts of length 450 mm.complete all as specified and directed.

S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply .

S&F stop valves 15 mm bore CP With crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as directed.

M&L MCB SP 6 to 32 Amp "C" curve.

Supply , lay, connect and test GI tubing 25 mm bore medium grade ISI marked with all fittings laid in trenches etc complete all as specified and as directed.

Ditto- allas per item No 31 above but of 40 mm bore

Supply and fixing in repair gun metal globe or gate valve with iron wheel head screwed both end for iron pipe and fixed of 40 mm bore

Ditto- all as per item No 33 above but 25 mm bore

Cutting the existing road surface i.e.surfacing WBM soiling any type of soil etc and making suitable trench of minimum 100mm x 60 cm deep along the cross section of road for laying GI/CI Pipe, returning refilling, filling and well ramming and removal of surplus surface soil to a distance not excedding 50 m and repair to road surface to match the existing specifications complete.

Supply and fixing Brass metal sprinkler for gardening, agriculture & Irrigation, 360 degree rotation, dia 3/4 inch, working pressure 2-3.5 bar, flow rate 0.8-1.5 m cubic/h, spray radius 8-12 meter, GI pipe fixed of 25 mm bore, complete all as specified and as directed.

Supply, fixing commissioning and testing, Monobloc pump of cap 3.7 KW/5 HP, specifications:- Modal -KDS 538 + 3 Phase, size 65mm x 50mm suitable for discharge of 7. LPS @ 30 meter head with brone impeller, wearing and sleeves & SS410 shaft gland packed, complete inclusive all accessries like fabrication of MS base frame, coupling guard set of foundations bolts couplings and coupled to incuding electric driven induction motor of cap 3.7 KW/5 HP, 415 Volts, 1450 rpm, make crompton foot mounted TEFC motor ( class F insulation, IP 55 protection, as per OEM Drawing, and any other items for which required at site, Test certificate with company serial number and all as specified and directed by Enginee-in-charge. Make:- Kirloskar or equivalent.

Supply and fixing Automatic star delta starter suitable for pump set of 5 HP, including for connection 3 phase 4 sqmm copper cable for @ 30 Meter, Make: L&T or equivalent. all as specified and directed by Enginee-in-charge

Note: Amount of sch of credit of Rs. " NIL "/-will be deducted from total amount of BOQ.

M/S SAMEER SUBHASH PATANI (BID ID -3094309)

J Sams Contructions (BID ID -3093658)

sunway associates (BID ID -3086731)

VS CONSTRUCTION (BID ID -3087884)

M/s M R MAHANA (BID ID -3078388)

SHRI SULAI ELECTRICALS (BID ID -3083110)