Welcome maint in the area of AGE B/R II under GE (N) Ahmednagar

Amount

M&L for Preparation of old decorated plastered or unplastered surfaces of walls including cornices etc and applying one coat of white lime wash on walls etc complete all as specified and directed by Engineer-in-Charge.

All as per item No.1 (here-in-before) but on ceiling.

M&L for Preparation of old decorated plastered / unplastered surfaces of wall including cornices etc. by brooming down and applying two coats of white lime wash on walls etc complete all as specified and directed by Engineer-in-Charge

M&L for Preparing old plastered / decorated surfaces of walls by washing down all as specified and applying one coat of oil bound distemper including smooth roller finish complete etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 4 (here-in-before) but two coats OBD.

All as per item No 4 (here-in-before) but on ceiling.

M&L for applying 2 mm thick wall care putty on walls (One layer) etc complete all as specified and directed by Engineer-in-Charge.

M&L for applying 2 mm thick wall care putty on ceiling (One layer) etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning and applying one or more coat of french polish etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted Wood or wood based surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 (here-in-before) but on Steel or Iron surfaces without roller finish.

Material and labour for preparing Old plasterd surfaces and applying one coat of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing plasterd surfaces and applying two coats of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames not exc 1.5 Sq m but with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 14 (here-in-before) but exc 1.5 Sqm and not exc 4 Sq m.

Taking down shutters of any description not exc 1 Sq. m each etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 16 (here-in-before) but exc 1 Sqm and not exc 2 Sq m.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

S&F for 19/20mm Prelaminated particle, board, exterior grade, prelmainated both side with deocrative choice laminations & other side balancing white lamination, fixed with screws to timber frame work for cupboards of bedroom/kitchen etc complete all as specified and directed by Engineer-in-Charge

S&F for 12 mm thick Vennered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work for cupboards of bedroom/kitchen etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix Continuous (piano) hinges of size 30mm, mild steel, bright finish or electrogalvanised as in cupboard shutter etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 40mm dia cupboard knobs fixed with nut, screws and washer of brass, polished fixed in repairs etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt of extruded section 75mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including decorative skin 1.00 mm thick etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.

S&F galvanised MS wire cloth 0.56 nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed by Engineer-in-Charge.

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

S&F for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and etc complete all as specified and directed by Engineer-in-Charge

Material and labour 15mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish and inclucing taking down existing slab and disposing outside MD land etc complete all as specified and directed by Engineer-in-Charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar sitution etc complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and inclucing taking down existing slab and disposing outside MD land etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge.

S&F In repair galvanised MS wire cloth 0.56 nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Seat Cover Standered etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs corner glass shelf 200mm size etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge.

S&F in Soap Dish wired type etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including Hacking out Old broken glass etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel and iron surfaces, of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair stop valve, 15 mm dia, cast copper alloy,screwed down high pressure screwed down high pressure with cruitch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk white primer on walls etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 62 but 20mm bore

S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 64 (here-in-before) but 20mm outer dia

Supply and fix 15 mm bore Tubes medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 66 (here-in-before) but 20 mm bore

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all all as directed.

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC mirror cabinet etc complete all as specified and directed by Engineer-in-Charge.

S & F of robe hook (Penta) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs sink cock with swivel spout etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15 mm size with Stainless steel Nuts of length 600mm etc complete all as specified and directed by Engineer-in-Charge.

S&F for stainless steel grating without waste holes 100 mm dia etc complete all as specified and directed by Engineer-in-Charge.

S&F for stainless steel grating with waste holes 100 mm dia etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge.

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for joint free / rectified non skid ceramic coloured tiles non skid of somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size exc 0.06 Sqm and n'exc 0.10 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engineer-in-Charge.

M&L for Cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils etc complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and directed by Engineer-in-Charge

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge (a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface. (b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech

Material and labour for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Steel Pulley operated cloth drying system, aluminium anodised 20 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDFE double core & fittings material etc complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:2:4 (Nominal Mix) B-1 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

An amount of Rs 70,815.00.00 shall be deducted from BOQ on account of schedule of credit

Arihant Construction

M/s AG PATHAN

OM SAI ASSOCIATES

M/S-B.R.SONAWANE