SPECIAL REPAIR TO EXISTING TEMPORARY BUILDING BY REPLACING AC SHEET WITH GALVALUME SHEETS AND FALSE CEILING AT AF STN BEGUMPET (PHASE-IV) UNDER GE (AF) HAKIMPET

Amount

B/R PORTION :- Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain profiled ridge sheet steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates (Fe 410-W Gde-E-250 quality-A) complete all as specified and as directed.

M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.

S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both direction complete all as specified and as directed.

S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed.

Demolition of brick work or stone/ boulder or block masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings including necessary formwork complete all as specified and as directed.

M&L for Preparing new plastered surfaces of walls and applying three coats of cement base paint complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts complete all as specified and as directed.

Dismantling timber scantling of any description of 40 Sqcm and over in section incl trusses in any position as in unframed work complete all as specified and as directed.

Fixing only timber scantling of any description of 40 Sqcm and over in section incl trusses in any position as in unframed work hard wood complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat creosote complete all as specified and as directed.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces including 3mm thick wall care putty and applying two coats of distemper oil emulsion over a coat of primer on surfaces of walls complete all as specified and as directed.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces and applying three coats of cement base paint on surfaces of walls complete all as specified and as directed.

E/M PORTION :- Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified and as directed.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade ISI marked with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit medium grade and conduit accessories ISI marked concealed in wall / ceiling/ fixed to roof etc and including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor, fabricated steel sunken terminal box duly painted made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed for One LED tube light/LED Lamp/Bldg security light controlled by one way switch complete all as specified and as directed.

All as per Ser item No 23 above but for one Ceiling / Exhaust Fan Point controlled by one one way switch complete all as specified and as directed.

All as per Ser item No 23 above but for 5 amps socket point on independent board complete all as specified and as directed.

All as per Ser item No 23 above but for 5 amps socket point on same board controlled by another switch complete all as specified and as directed.

All as per Ser item No 23 above but with 4 sqmm cable for 15/20/25 amps socket / Power Unit on independent board with 4 Sqmm earth continuty wire complete all as specified and directed.

Supply and fix in repair switch piano modular type, 6 Amps 240 volts single pole one way complete all as specified and as directed.

Supply and fix in repair socket outlet, 5 pin 6 Amps, Modular type complete all as specified and as directed.

Supply and fix in repair socket outlet 6/16 Amps, 6 in 1, Modular type complete all as specified and as directed.

Supply and fix switch piano modular type,15/16 Amps 240 volts single pole one way complete all as specified and as directed.

Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body complete all as specified and as directed.

supply and fix modular plates with frame white colour 2 module complete all as specified and as directed.

supply and fix modular plates with frame white colour 3 module complete all as specified and as directed.

supply and fix modular plates with frame white colour 6 module complete all as specified and as directed.

supply and fix modular plates with frame white colour 8 module complete all as specified and as directed.

Supply and fix stepped type fan regulator electronic modular type, 2 module, 240 Volt complete all as specified and as directed.

Supply and fix in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and as directed. Make -Crompton or equivalent model in Philips / Wipro.

Supply and fix in repair 10 watt intregated LED tube light fitting 2 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and as directed. Make -Crompton or equivalent model in Philips/ Wipro .

M & L for Taking down existing Ceiling Fan, sealing cable end of any Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Fan keep in safe custody for refixing the same its original position after cleaning complete all as specified and as directed.

M & L for Taking down existing for taking down existing Geyser of any capacity from its original position and keeeping in safe custody for refixing the same after completion of necessary wall work and connecting inlet outlet water connection, stop valve etc complete all as specified and as directed.

S & F GI tubes , medium grade of 15mm dia with all fitting fixing in wall floor and trench and all necessary arrangements for fixing pipe line and making connection from existing pipe line including taking out old u/s pipe line complete all as specified and as directed.

Supply & fix 15mm bore stop valve fancy type cromium plated down high pressure with suitable for hot or cold water including taking out old u/s complete all as specified and as directed.

Supply & fix 15mm bore bib taps fancy type cromium plated down high pressure with suitable for hot or cold water cast copper alloy with clutch or butterfly handle screwed downfrom iron pipe including taking out old u/s complete all as specified and as directed.

Supply & fix PVC connection pipe of size 15x450mm complete with PTMT nuts including taking down old u/s complete all as specified and as directed.

Supply and Fix Louvers/shutters made of galvanised sheet to automatically open and close opening / hole made for exhausst fan of size 300mm dia complete all as specified and as directeed.

S&F Exhaust Fan of Size 300mm Sweep, Steel body, AC Single Phase. 230 Volt with Blades, Frame and Louvers, Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length complete all as specified and as directed. Make : Usha or equivalent model in Havells/ Orient

M&L for sub main wiring comprising single core, 4 Runs of 6 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts including provision of 1X 6 sqmm nominal cross sectional area multistranded copper conductor cableFRLSH grade , PVC insulated unsheathed 1100 Volts grade as earth wire drawn through existing pvc conduit including taking out old u/s submain wiring complete all as specified and as directed.

All as per Item No 48 above but two single core 4 Sqmm for phase & neutral and 01 single core 2.5 Sqmm for earth wire complete all as specified and as directed.

M&L for cutting chases in stone masonry wall/Concrete floor/roof for laying pvc conduit and pointing in cement mortar 1:3 and making good to disturbed surface complete all as specified and as directed.

S & F Angle holder with LED Bulb 9 Watt complete all as specified and as directed.

Taking down MCB DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and as directed.

Supply and fix in repair SP&N DBs, double door, 240 volt, 12 way complete all as specified and as directed. Make:- Legrand

Supply and fix in repair TP&N DBs, double door, 240 volt, 4 way complete all as specified and as directed.

Supply and fix in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fix in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 32 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

M&L in repair for MCB single pole, 240 volts, 6 - 32 Amps, 10 KA C Curve complete all as specified and as directed.

M&L in repair for MCB single pole & neutral 240 volts 32Amps C curve complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make -Crompton or equivalent from Philips / Wipro.

Supply and fixing LED street light fitting 30/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete after taking down old unserviceable light fitting complete all as specified and as directed. Make: Crompton or equivalent from Philips / Wipro.

S&F street light bracket madeup of GI Pipe light grade32 mm dialength 1.5 Mtr bent to shape withMS clams, bolts ,nut and washers complete including taking out old u/s bracket complete all as specified and as directed.

Supply and fix Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp and electrically connecting up incoming and outgoing connections including taking old u/s complete all as specified and as directed.

M&L for earthing with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI wire 4 mm dia as earthing lead means of nut, bolts and washers made out of galvanised iron mild steel and 32 mm dia GI pipe "light grade" for protection of earth lead and connected to test point or as directed including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and RCC Cover of size 450X450X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) rein-forced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50.00 mtr and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and Testing on completion , including taking down unserviceable earthing complete all as specified and as directed.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

VACON INFRASTRUCTURES (BID ID -3474548)

K LAKSHMAN SINGH AND CO (BID ID -3473164)

M/s. Ravi and brothers (BID ID -3469096)

B.N.S Constructions (BID ID -3469505)

RAJU AND COMPANY (BID ID -3474626)

NEWS CONSTRUCTIONS (BID ID -3474439)

M/S DIVIJA BUILDERS (BID ID -3474563)

Indu Electricals (BID ID -3468248)

Rajesh Engineering Consultants (BID ID -3474502)

M/s G.CHAKRAPANI AND SONS (BID ID -3473958)

Squad 7 Projects and Services Pvt Ltd (BID ID -3468706)

Mavee Syndicate (BID ID -3474429)

B Sreepathy Rao (BID ID -3469384)

INDGUARD ENGINEERS (BID ID -3474297)

harshraj and co (BID ID -3465699)